Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MXLPLAD15KP30CA
詳細を表示 DataSheets

MXLPLAD15KP30CA

Product Overview

Category

The MXLPLAD15KP30CA belongs to the category of electronic components, specifically surge protection devices.

Use

It is used to protect electronic equipment from voltage surges and transients.

Characteristics

  • High surge current capability
  • Low clamping voltage
  • Fast response time
  • Compact design

Package

The MXLPLAD15KP30CA comes in a protective casing suitable for electronic component installation.

Essence

The essence of this product lies in its ability to safeguard sensitive electronic devices from voltage spikes and surges.

Packaging/Quantity

The MXLPLAD15KP30CA is typically packaged individually and is available in various quantities depending on the supplier.

Specifications

  • Maximum Reverse Standoff Voltage: 15V
  • Breakdown Voltage: 16.7V
  • Maximum Clamping Voltage: 30V
  • Peak Pulse Current: 100A
  • Operating Temperature Range: -55°C to 150°C
  • Package: DO-201AD

Detailed Pin Configuration

The MXLPLAD15KP30CA has a standard DO-201AD package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Provides protection against voltage surges and transients
  • Fast response time ensures minimal damage to connected equipment
  • Can handle high surge currents effectively

Advantages and Disadvantages

Advantages

  • High surge current capability
  • Low clamping voltage
  • Fast response time

Disadvantages

  • Limited to specific voltage ranges
  • May require additional circuitry for comprehensive surge protection

Working Principles

The MXLPLAD15KP30CA operates based on the principle of avalanche breakdown, where it diverts excess voltage away from the protected equipment by conducting the surge current through itself.

Detailed Application Field Plans

The MXLPLAD15KP30CA is commonly used in the following applications: - Power supply units - Telecommunication equipment - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the MXLPLAD15KP30CA include: - Littelfuse V15P30-M3/86A - Bourns 15KP30CA - Vishay SA15CA-E3/54

In conclusion, the MXLPLAD15KP30CA is a crucial component in protecting electronic devices from voltage surges and transients, offering high surge current capability, low clamping voltage, and fast response time. Its application spans across various industries, and there are alternative models available for different specifications and requirements.

Word Count: 410

技術ソリューションにおける MXLPLAD15KP30CA の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of MXLPLAD15KP30CA in technical solutions:

  1. What is the maximum peak pulse power (Ppp) of MXLPLAD15KP30CA?

    • The maximum peak pulse power is 15,000 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage (Vbr) of MXLPLAD15KP30CA?

    • The breakdown voltage is 30 volts minimum.

  3. What is the typical clamping voltage (Vc) of MXLPLAD15KP30CA?

    • The typical clamping voltage is 48.4 volts at 100A.

  4. What is the operating temperature range for MXLPLAD15KP30CA?

    • The operating temperature range is -55°C to +150°C.

  5. What is the peak pulse current (Ipp) rating for MXLPLAD15KP30CA?

    • The peak pulse current rating is 484.5A for an 8/20μs waveform.

  6. What is the capacitance (Cj) of MXLPLAD15KP30CA?

    • The capacitance is typically 500pF measured at 1MHz and 2V.

  7. What is the package type for MXLPLAD15KP30CA?

    • The package type is a DO-203AB (DO-5) package.

  8. What are the typical applications for MXLPLAD15KP30CA?

    • Typical applications include surge protection in telecommunications equipment, industrial and consumer electronics, and automotive systems.

  9. What is the lead-free status of MXLPLAD15KP30CA?

    • MXLPLAD15KP30CA is lead-free and RoHS compliant.

  10. What are the recommended soldering conditions for MXLPLAD15KP30CA?

    • The recommended soldering conditions are 260°C for 10 seconds.

Let me know if you need further information on any of these questions!