Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MXLSMCJ58A
詳細を表示 DataSheets

MXLSMCJ58A Product Overview

Introduction

The MXLSMCJ58A is a semiconductor device belonging to the category of transient voltage suppressors (TVS). This component is widely used for protecting sensitive electronic equipment from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events. The MXLSMCJ58A offers unique characteristics, packaging, and quantity options that make it suitable for various applications.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS)
  • Use: Protection against voltage transients induced by lightning, ESD, and other transient voltage events
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: SMC (DO-214AB)
  • Essence: Provides robust protection for sensitive electronic components
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

The MXLSMCJ58A features the following specifications: - Peak Pulse Power: 1500 W - Breakdown Voltage Range: 64.1 V to 71 V - Operating Temperature Range: -55°C to +150°C - Reverse Standoff Voltage: 58 V - Clamping Voltage: 93.6 V at 10 A

Detailed Pin Configuration

The MXLSMCJ58A follows the standard SMC (DO-214AB) package configuration, with two leads for connection.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect downstream components.
  • Fast Response Time: Rapid reaction to transient events ensures minimal impact on the protected circuitry.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Robust protection against transient voltage events
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Higher clamping voltage compared to some alternative models
  • Larger footprint compared to smaller form factor TVS devices

Working Principles

The MXLSMCJ58A operates based on the principle of avalanche breakdown, where it rapidly conducts excess current when subjected to a transient voltage event, thereby diverting the excessive energy away from the protected circuitry.

Detailed Application Field Plans

The MXLSMCJ58A finds application in various fields, including: - Telecommunications equipment - Industrial control systems - Automotive electronics - Consumer electronics - Power supplies

Detailed and Complete Alternative Models

Some alternative models to the MXLSMCJ58A include: - SMAJ58A: Similar TVS device with a smaller footprint - P6SMB58A: TVS device with higher surge capability - 1.5SMC58A: TVS device with lower clamping voltage

In conclusion, the MXLSMCJ58A transient voltage suppressor offers reliable protection against transient voltage events and finds widespread use across diverse electronic applications.

[Word Count: 411]

技術ソリューションにおける MXLSMCJ58A の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MXLSMCJ58A?

    • MXLSMCJ58A is a type of surface mount transient voltage suppressor diode commonly used for overvoltage protection in electronic circuits.

  2. What is the maximum voltage rating of MXLSMCJ58A?

    • The maximum voltage rating of MXLSMCJ58A is 58 volts.

  3. What is the peak pulse power handling capability of MXLSMCJ58A?

    • MXLSMCJ58A can handle peak pulse power up to a specified level, typically around 1500 watts.

  4. What are the typical applications of MXLSMCJ58A?

    • MXLSMCJ58A is commonly used in various technical solutions such as power supplies, communication equipment, automotive electronics, and industrial controls for overvoltage protection.

  5. What is the forward voltage drop of MXLSMCJ58A?

    • The forward voltage drop of MXLSMCJ58A is relatively low, typically around 0.5 volts at a specified current level.

  6. What is the operating temperature range of MXLSMCJ58A?

    • MXLSMCJ58A is designed to operate within a temperature range of -55°C to 150°C, making it suitable for a wide range of environments.

  7. How does MXLSMCJ58A provide overvoltage protection?

    • MXLSMCJ58A clamps the voltage across the circuit it protects by diverting excess current away from sensitive components when an overvoltage event occurs.

  8. What is the package type of MXLSMCJ58A?

    • MXLSMCJ58A is typically available in a surface mount package, making it suitable for automated assembly processes.

  9. Is MXLSMCJ58A RoHS compliant?

    • Yes, MXLSMCJ58A is generally RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive's requirements.

  10. Are there any recommended layout considerations for using MXLSMCJ58A in a circuit?

    • It is recommended to minimize the trace length between the MXLSMCJ58A and the protected circuit, and to ensure a low impedance path to the ground plane for effective overvoltage protection.