MXP4KE27CA Product Overview
Introduction
The MXP4KE27CA is a high-performance electronic component designed for use in various electrical and electronic applications. This entry provides a comprehensive overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic Component
- Use: Protection against voltage transients in electronic circuits
- Characteristics: High surge capability, low clamping voltage, fast response time
- Package: Axial leaded, DO-41 package
- Essence: Transient Voltage Suppressor (TVS) diode
- Packaging/Quantity: Available in reels or bulk packaging, quantity varies by supplier
Specifications
- Peak Power Dissipation: 400W
- Breakdown Voltage: 24.4V to 27V
- Maximum Clamping Voltage: 38.9V at 10A
- Operating Temperature Range: -55°C to 175°C
- Storage Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The MXP4KE27CA TVS diode has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Transient Voltage Suppression: Provides protection against voltage transients and surges.
- Fast Response Time: Rapidly clamps transient voltages to safe levels.
- High Surge Capability: Can withstand high surge currents without degradation.
Advantages and Disadvantages
Advantages
- Effective protection against voltage transients
- Fast response time ensures minimal impact on the protected circuit
- High surge capability for robust performance
Disadvantages
- Limited to specific voltage ranges
- Requires proper installation and circuit design for optimal performance
Working Principles
The MXP4KE27CA operates based on the principle of avalanche breakdown. When a transient voltage spike occurs, the TVS diode rapidly conducts, diverting the excess energy away from the protected circuit. This action clamps the transient voltage to a safe level, safeguarding sensitive components.
Detailed Application Field Plans
The MXP4KE27CA is suitable for a wide range of applications, including: - Power supply units - Automotive electronics - Industrial control systems - Telecommunication equipment - Consumer electronics
Detailed and Complete Alternative Models
Several alternative models with similar specifications and functionality are available in the market, including: - MXP4KE24CA - MXP4KE30CA - MXP4KE33CA - MXP4KE36CA
These alternative models offer varying breakdown voltages to cater to different application requirements.
In conclusion, the MXP4KE27CA TVS diode is a reliable and efficient solution for protecting electronic circuits from voltage transients. Its high surge capability, fast response time, and robust design make it a valuable component in diverse electronic applications.
[Word Count: 436]
技術ソリューションにおける MXP4KE27CA の適用に関連する 10 件の一般的な質問と回答をリストします。
What is MXP4KE27CA?
- MXP4KE27CA is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.
What are the key features of MXP4KE27CA?
- MXP4KE27CA features a peak power dissipation of 400W, low clamping voltage, and fast response time.
Where can MXP4KE27CA be used in technical solutions?
- MXP4KE27CA can be used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and telecommunications systems.
How does MXP4KE27CA protect electronic circuits?
- MXP4KE27CA diverts excessive voltage away from sensitive components by providing a low-impedance path to ground during voltage spikes.
What is the operating temperature range of MXP4KE27CA?
- MXP4KE27CA typically operates within a temperature range of -55°C to 175°C.
Can MXP4KE27CA be used for surge protection in power lines?
- Yes, MXP4KE27CA is suitable for surge protection in power lines due to its high peak power dissipation and fast response time.
Are there any specific mounting or handling considerations for MXP4KE27CA?
- MXP4KE27CA should be mounted on a heat sink or metal pad to dissipate heat effectively, and proper ESD precautions should be taken during handling.
What are the industry standards or certifications associated with MXP4KE27CA?
- MXP4KE27CA may comply with industry standards such as AEC-Q101 for automotive applications and may be RoHS compliant.
Can MXP4KE27CA be used in high-frequency applications?
- Yes, MXP4KE27CA can be used in high-frequency applications due to its low capacitance and fast response time.
What are the typical failure modes of MXP4KE27CA?
- The typical failure modes of MXP4KE27CA include short circuit, open circuit, and degradation of clamping voltage over time due to prolonged exposure to high voltage transients.