MXP5KE6.0CAE3 Encyclopedia Entry

Product Overview

Use

It is used to protect electronic circuits from overvoltage transients caused by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

Package: DO-214AB (SMC)
Essence: TVS diode for surge protection
Packaging/Quantity: Available in tape and reel packaging with a quantity of 3000 units per reel

Specifications

The MXP5KE6.0CAE3 has the following specifications: - Peak Pulse Power: 5000W - Standoff Voltage: 6.0V - Breakdown Voltage: 6.67V to 7.37V - Clamping Voltage: 9.2V at 16.7A - Operating Temperature: -55°C to +175°C

Detailed Pin Configuration

The MXP5KE6.0CAE3 TVS diode has a standard DO-214AB (SMC) package with two pins. Pin 1 is the cathode, and pin 2 is the anode.

Functional Features

Fast response time
Low clamping voltage
High surge current capability
RoHS compliant

Advantages and Disadvantages

Advantages

Effective protection against transient voltage events
Wide operating temperature range
RoHS compliance for environmental friendliness

Disadvantages

Sensitive to reverse polarity connection
Limited to low voltage applications

Working Principles

When a transient voltage event occurs, the MXP5KE6.0CAE3 TVS diode conducts and clamps the voltage to a safe level, protecting the downstream circuitry.

Detailed Application Field Plans

The MXP5KE6.0CAE3 is commonly used in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the MXP5KE6.0CAE3 TVS diode include: - P6KE6.0CA - 1.5KE6.0CA - SMAJ6.0A

In conclusion, the MXP5KE6.0CAE3 TVS diode provides effective surge protection for a wide range of electronic applications, making it an essential component in safeguarding sensitive circuitry from transient voltage events.

[Word Count: 320]

技術ソリューションにおける MXP5KE6.0CAE3 の適用に関連する 10 件の一般的な質問と回答をリストします。

What is MXP5KE6.0CAE3?
- MXP5KE6.0CAE3 is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.
What are the key features of MXP5KE6.0CAE3?
- MXP5KE6.0CAE3 features include a peak power dissipation of 5000W, low clamping voltage, and fast response time.
How is MXP5KE6.0CAE3 applied in technical solutions?
- MXP5KE6.0CAE3 is commonly used in surge protection for sensitive electronics, such as in power supplies, communication equipment, and automotive systems.
What are the typical operating conditions for MXP5KE6.0CAE3?
- MXP5KE6.0CAE3 operates within a temperature range of -55°C to +175°C and can handle transient voltages up to 6.0V.
How does MXP5KE6.0CAE3 provide overvoltage protection?
- MXP5KE6.0CAE3 clamps the voltage to a safe level by diverting excess current away from the protected circuit when a transient event occurs.
Can MXP5KE6.0CAE3 be used in high-frequency applications?
- Yes, MXP5KE6.0CAE3 has a fast response time and can effectively suppress voltage transients in high-frequency applications.
What are the potential failure modes of MXP5KE6.0CAE3?
- MXP5KE6.0CAE3 may fail due to prolonged exposure to overvoltage conditions or excessive current, leading to degradation or short-circuiting.
Are there any recommended layout considerations when using MXP5KE6.0CAE3?
- It's important to minimize the length of traces between the protected circuit and the MXP5KE6.0CAE3 to reduce parasitic inductance and ensure effective transient suppression.
Can MXP5KE6.0CAE3 be used in conjunction with other protective devices?
- Yes, MXP5KE6.0CAE3 can be combined with other protective components such as fuses, varistors, or gas discharge tubes to create a comprehensive protection scheme.
Where can I find detailed specifications and application notes for MXP5KE6.0CAE3?
- Detailed specifications and application notes for MXP5KE6.0CAE3 can be found in the manufacturer's datasheet and application guides, which provide comprehensive information on its usage in technical solutions.