Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MXP6KE13CA
詳細を表示 DataSheets

MXP6KE13CA - Product Overview and Specifications

Introduction

The MXP6KE13CA is a high-performance transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides a comprehensive overview of the MXP6KE13CA, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage transients induced by lightning and other transient voltage events
  • Characteristics: High performance, reliable protection, low clamping voltage
  • Package: DO-15 package
  • Essence: Safeguarding sensitive electronic equipment
  • Packaging/Quantity: Available in reels of 1500 units

Specifications

  • Peak Pulse Power: 6000W
  • Standoff Voltage: 11.1V
  • Breakdown Voltage: 12.4V
  • Maximum Clamping Voltage: 18.2V
  • Operating Temperature Range: -55°C to 175°C
  • Storage Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MXP6KE13CA TVS diode features a standard DO-15 package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient overvoltages
  • Fast Response Time: Rapid reaction to transient events
  • Low Leakage Current: Minimizes power consumption during normal operation
  • High Peak Pulse Power: Provides robust protection for sensitive electronics

Advantages and Disadvantages

Advantages

  • High peak pulse power handling capability
  • Low clamping voltage for enhanced protection
  • Fast response time for rapid transient suppression

Disadvantages

  • Relatively higher cost compared to standard diodes
  • Sensitive to reverse bias conditions if not properly installed and used

Working Principles

The MXP6KE13CA operates based on the principle of avalanche breakdown. When a transient voltage event occurs, the diode rapidly conducts, diverting the excess energy away from the protected circuit. This action effectively limits the voltage across the circuit to a safe level, preventing damage to the connected electronics.

Detailed Application Field Plans

The MXP6KE13CA is widely used in various applications requiring protection against transient voltage events, including: - Power supply units - Communication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • MXP6KE10CA: Standoff Voltage: 9.5V, Breakdown Voltage: 10.5V
  • MXP6KE16CA: Standoff Voltage: 14.4V, Breakdown Voltage: 16.2V
  • MXP6KE22CA: Standoff Voltage: 19.9V, Breakdown Voltage: 22.1V
  • MXP6KE33CA: Standoff Voltage: 30.8V, Breakdown Voltage: 34.2V

In conclusion, the MXP6KE13CA transient voltage suppressor diode offers robust protection against transient voltage events, making it an essential component in safeguarding sensitive electronic equipment across various industries.

Word Count: 470 words

技術ソリューションにおける MXP6KE13CA の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum peak pulse power of MXP6KE13CA?

    • The maximum peak pulse power of MXP6KE13CA is 6000W.

  2. What is the breakdown voltage of MXP6KE13CA?

    • The breakdown voltage of MXP6KE13CA is 11.7V.

  3. What is the typical clamping voltage of MXP6KE13CA?

    • The typical clamping voltage of MXP6KE13CA is 19.9V at 10A.

  4. What is the application of MXP6KE13CA in technical solutions?

    • MXP6KE13CA is commonly used for transient voltage suppression in various electronic and electrical systems to protect against voltage spikes and surges.

  5. What are the key features of MXP6KE13CA?

    • The key features of MXP6KE13CA include high surge capability, fast response time, low clamping voltage, and compatibility with automated placement equipment.

  6. What is the operating temperature range of MXP6KE13CA?

    • The operating temperature range of MXP6KE13CA is -55°C to +175°C.

  7. How does MXP6KE13CA provide protection in technical applications?

    • MXP6KE13CA provides protection by diverting excessive current away from sensitive components when a transient voltage event occurs, thus safeguarding the circuitry.

  8. Is MXP6KE13CA suitable for use in automotive electronics?

    • Yes, MXP6KE13CA is suitable for use in automotive electronics due to its robust construction and ability to withstand harsh environments.

  9. Can MXP6KE13CA be used in telecommunications equipment?

    • Yes, MXP6KE13CA is commonly employed in telecommunications equipment to protect against lightning-induced surges and other voltage transients.

  10. What are the recommended mounting techniques for MXP6KE13CA?

    • MXP6KE13CA can be mounted using through-hole or surface-mount techniques, and it is important to follow the manufacturer's guidelines for proper installation and thermal management.