Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MXP6KE30CA
詳細を表示 DataSheets

MXP6KE30CA

Product Overview

Category

The MXP6KE30CA belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

The MXP6KE30CA is typically available in a DO-15 package.

Essence

The essence of the MXP6KE30CA lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.

Packaging/Quantity

The MXP6KE30CA is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Peak Pulse Power: 600W
  • Breakdown Voltage: 26.7V
  • Maximum Clamping Voltage: 43.6V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The MXP6KE30CA typically features two pins, with the anode connected to the positive side and the cathode connected to the negative side.

Functional Features

  • Bi-directional clamping capability
  • Low leakage current
  • High reliability

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Limited surge current handling capacity compared to higher-rated TVS diodes
  • Higher clamping voltage compared to some alternative models

Working Principles

When a transient voltage event occurs, the MXP6KE30CA conducts excess current to ground, limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MXP6KE30CA is widely used in various applications, including: - Telecommunications equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MXP6KE30CA include: - MXP6KE33CA - MXP6KE36CA - MXP6KE40CA

These alternatives offer different breakdown voltages and clamping voltages to suit specific application requirements.

This comprehensive entry provides a detailed understanding of the MXP6KE30CA, covering its basic information overview, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける MXP6KE30CA の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum peak pulse power of MXP6KE30CA?

    • The maximum peak pulse power of MXP6KE30CA is 6000 watts.

  2. What is the breakdown voltage of MXP6KE30CA?

    • The breakdown voltage of MXP6KE30CA is 27.8V.

  3. What is the typical clamping voltage of MXP6KE30CA?

    • The typical clamping voltage of MXP6KE30CA is 45.7V at 100A.

  4. What are the applications of MXP6KE30CA?

    • MXP6KE30CA is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and automotive electronics.

  5. What is the operating temperature range of MXP6KE30CA?

    • The operating temperature range of MXP6KE30CA is -55°C to +175°C.

  6. What is the response time of MXP6KE30CA?

    • The response time of MXP6KE30CA is typically less than 1 picosecond.

  7. What is the package type of MXP6KE30CA?

    • MXP6KE30CA is available in a DO-15 package.

  8. Is MXP6KE30CA RoHS compliant?

    • Yes, MXP6KE30CA is RoHS compliant.

  9. What is the peak forward surge current of MXP6KE30CA?

    • The peak forward surge current of MXP6KE30CA is 200A.

  10. What are the key features of MXP6KE30CA?

    • Some key features of MXP6KE30CA include its high surge capability, fast response time, and low clamping voltage.