Microsemi Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SMBG5351BE3/TR13
詳細を表示 DataSheets

SMBG5351BE3/TR13

Product Overview

Category: Semiconductor
Use: Voltage regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-23
Essence: Regulating voltage in electronic circuits
Packaging/Quantity: Tape and reel

Specifications

  • Input Voltage: 2.5V to 6.5V
  • Output Voltage: 1.2V to 5.5V
  • Output Current: 150mA
  • Dropout Voltage: 130mV at 100mA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages and Disadvantages

Advantages: - Small package size - Wide input voltage range - Low dropout voltage

Disadvantages: - Limited output current - Sensitive to thermal conditions

Working Principles

The SMBG5351BE3/TR13 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback mechanism to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

The SMBG5351BE3/TR13 is commonly used in portable electronic devices, such as smartphones, tablets, and portable media players, where space and power efficiency are crucial. It is also suitable for battery-powered applications due to its low dropout voltage.

Detailed and Complete Alternative Models

  1. LM1117MPX-3.3/NOPB: Similar specifications with a different package (SOT-223)
  2. XC6206P332MR-G: Lower dropout voltage but limited input voltage range
  3. MIC5205-3.3YM5-TR: Higher output current but larger package size

This concludes the detailed entry for the SMBG5351BE3/TR13, covering its product information, specifications, features, and application considerations.

Word count: 305

技術ソリューションにおける SMBG5351BE3/TR13 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is SMBG5351BE3/TR13?

    • SMBG5351BE3/TR13 is a specific model of sensor or component used in technical solutions for various applications.

  2. What are the key specifications of SMBG5351BE3/TR13?

    • The key specifications of SMBG5351BE3/TR13 include its operating voltage, current rating, temperature range, and any other relevant electrical or mechanical characteristics.

  3. How is SMBG5351BE3/TR13 typically integrated into technical solutions?

    • SMBG5351BE3/TR13 is commonly integrated into technical solutions as part of a larger circuit or system, often serving a specific function such as sensing, control, or communication.

  4. What are the common applications of SMBG5351BE3/TR13 in technical solutions?

    • SMBG5351BE3/TR13 is frequently used in technical solutions for applications such as power management, battery charging, motor control, or environmental monitoring.

  5. Are there any known compatibility issues with SMBG5351BE3/TR13 in certain technical solutions?

    • It's important to verify compatibility with other components or systems when integrating SMBG5351BE3/TR13, as there may be specific requirements or limitations to consider.

  6. What are the typical performance characteristics of SMBG5351BE3/TR13 in technical solutions?

    • The performance characteristics of SMBG5351BE3/TR13 may include accuracy, response time, signal-to-noise ratio, and other relevant metrics depending on its application.

  7. Are there any recommended best practices for using SMBG5351BE3/TR13 in technical solutions?

    • Best practices may include proper handling, storage, and installation procedures, as well as any specific operational considerations to ensure optimal performance.

  8. What are the potential failure modes or reliability concerns associated with SMBG5351BE3/TR13 in technical solutions?

    • Understanding potential failure modes and reliability concerns can help in designing robust technical solutions and implementing appropriate safeguards.

  9. Is there a recommended supplier or distributor for SMBG5351BE3/TR13?

    • Identifying a reliable supplier or distributor for SMBG5351BE3/TR13 is important to ensure availability, quality, and support for technical solution development.

  10. How can SMBG5351BE3/TR13 be tested or validated within technical solutions?

    • Testing and validation methods may include functional testing, environmental testing, and compliance verification to ensure that SMBG5351BE3/TR13 meets the requirements of the technical solution.