NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC56F84587VLL
詳細を表示 DataSheets

MC56F84587VLL

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial control applications
  • Characteristics: High-performance, low-power consumption, integrated peripherals
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: Advanced microcontroller with enhanced processing capabilities
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Architecture: 16-bit Digital Signal Controller (DSC)
  • Clock Speed: Up to 100 MHz
  • Flash Memory: 256 KB
  • RAM: 32 KB
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 64
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Analog-to-Digital Converter (ADC): 12-bit, 16 channels
  • Timers: Multiple timers/counters with various modes
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC56F84587VLL microcontroller has a total of 64 pins. The pin configuration is as follows:

  1. VDDA - Analog power supply
  2. VSSA - Analog ground
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. ... (Detailed pin configuration continues)

Functional Features

  • Enhanced processing capabilities for demanding applications
  • Integrated peripherals for efficient system design
  • Low-power consumption for energy-efficient operation
  • Flexible communication interfaces for seamless connectivity
  • High-resolution ADC for accurate analog signal acquisition
  • Multiple timers/counters for precise timing control
  • Robust operating temperature range for harsh environments

Advantages

  • High-performance microcontroller suitable for demanding applications
  • Integrated peripherals reduce external component count and simplify system design
  • Low-power consumption extends battery life in portable devices
  • Wide operating temperature range enables reliable operation in extreme conditions

Disadvantages

  • Limited flash memory and RAM capacity compared to some other microcontrollers in the same category
  • Higher cost compared to entry-level microcontrollers with similar features

Working Principles

The MC56F84587VLL microcontroller operates based on a 16-bit Digital Signal Controller (DSC) architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals to perform desired tasks. The clock speed determines the execution speed of instructions, while the integrated peripherals enable communication, timing control, and analog signal acquisition.

Detailed Application Field Plans

The MC56F84587VLL microcontroller finds applications in various fields, including:

  1. Industrial automation and control systems
  2. Motor control applications
  3. Power electronics
  4. Automotive systems
  5. Consumer electronics
  6. Internet of Things (IoT) devices

Detailed and Complete Alternative Models

  1. MC56F844XX: Similar microcontroller series with lower flash memory and RAM capacity
  2. MC56F847XX: Similar microcontroller series with higher flash memory and RAM capacity
  3. MC56F832XX: Entry-level microcontroller series with basic features and lower cost

(Note: The above alternative models are just examples and not an exhaustive list.)

This concludes the encyclopedia entry for the MC56F84587VLL microcontroller.

技術ソリューションにおける MC56F84587VLL の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC56F84587VLL in technical solutions:

  1. Q: What is MC56F84587VLL? A: MC56F84587VLL is a microcontroller from NXP's DSC (Digital Signal Controller) family, designed for embedded control applications.

  2. Q: What are the key features of MC56F84587VLL? A: Some key features include a 32-bit core, integrated peripherals, high-performance analog and digital signal processing capabilities, and low power consumption.

  3. Q: What are the typical applications of MC56F84587VLL? A: MC56F84587VLL is commonly used in applications such as motor control, power conversion, industrial automation, automotive systems, and consumer electronics.

  4. Q: How does MC56F84587VLL support motor control applications? A: MC56F84587VLL offers dedicated hardware modules like PWM generators, ADCs, and position sensors interfaces that enable precise motor control algorithms.

  5. Q: Can MC56F84587VLL handle real-time communication protocols? A: Yes, MC56F84587VLL supports various communication protocols like UART, SPI, I2C, CAN, and Ethernet, making it suitable for real-time communication requirements.

  6. Q: Does MC56F84587VLL have built-in security features? A: Yes, MC56F84587VLL provides security features like memory protection units, secure boot, and cryptographic accelerators to ensure system integrity and data security.

  7. Q: What development tools are available for programming MC56F84587VLL? A: NXP provides a comprehensive software development kit (SDK) along with an integrated development environment (IDE) like CodeWarrior or MCUXpresso for programming and debugging.

  8. Q: Can MC56F84587VLL be used in safety-critical applications? A: Yes, MC56F84587VLL is designed to meet safety standards like ISO 26262 and IEC 61508, making it suitable for safety-critical applications such as automotive systems.

  9. Q: What is the power consumption of MC56F84587VLL? A: The power consumption of MC56F84587VLL depends on the operating conditions and usage, but it is generally optimized for low power applications.

  10. Q: Are there any reference designs available for MC56F84587VLL? A: Yes, NXP provides reference designs and application notes that help developers get started quickly with MC56F84587VLL-based solutions in various applications.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases.