NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC68HC908JK3CP
詳細を表示 DataSheets

MC68HC908JK3CP

Introduction

The MC68HC908JK3CP is a microcontroller belonging to the HC08 family of 8-bit microcontrollers. This versatile microcontroller is widely used in various applications due to its unique features and capabilities.

Basic Information Overview

  • Category: Microcontroller
  • Use: Control and processing unit for embedded systems
  • Characteristics: Low power consumption, high performance, integrated peripherals
  • Package: 16-pin PDIP (Plastic Dual In-line Package)
  • Essence: Embedded control and processing
  • Packaging/Quantity: Typically available in tubes or reels with varying quantities

Specifications

  • CPU: 8-bit HCS08 central processor unit
  • Clock Speed: Up to 8 MHz
  • Memory: 4 KB flash memory, 256 bytes RAM
  • I/O Ports: 13 I/O ports
  • Timers: 2-channel 16-bit timer
  • Communication Interfaces: SCI (Serial Communication Interface), SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.7V to 5.5V

Detailed Pin Configuration

  1. VDD - Power supply
  2. PT0/ICP1 - General-purpose I/O pin/Timers input/capture
  3. PT1/ICP2 - General-purpose I/O pin/Timers input/capture
  4. PT2/OC1A - General-purpose I/O pin/Output compare
  5. PT3/OC1B - General-purpose I/O pin/Output compare
  6. PT4/SCK - General-purpose I/O pin/Serial clock
  7. PT5/MISO - General-purpose I/O pin/Master in slave out
  8. PT6/MOSI - General-purpose I/O pin/Master out slave in
  9. PT7/RXD - General-purpose I/O pin/Receive data
  10. RESET - Reset pin
  11. VSS - Ground
  12. XTAL - Crystal oscillator input
  13. EXTAL - Crystal oscillator output
  14. IRQ - Interrupt request input
  15. VDD - Power supply
  16. PT0/TxD - General-purpose I/O pin/Transmit data

Functional Features

  • Integrated Peripherals: Includes timers, communication interfaces, and I/O ports
  • Low Power Consumption: Suitable for battery-powered applications
  • High Performance: Efficient processing capabilities for embedded systems
  • Flexible I/O Configuration: Allows versatile interfacing with external devices

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Integrated peripherals reduce external component count
  • High-performance CPU for processing tasks

Disadvantages

  • Limited memory capacity compared to higher-end microcontrollers
  • Limited number of I/O ports for complex applications

Working Principles

The MC68HC908JK3CP operates as the control and processing unit in embedded systems. It executes user-defined programs stored in its flash memory, interacts with external devices through its I/O ports, and communicates with other systems via its communication interfaces.

Detailed Application Field Plans

The MC68HC908JK3CP finds applications in various fields such as: - Automotive: Engine control units, dashboard displays - Consumer Electronics: Remote controls, small appliances - Industrial Control: Sensor interfaces, motor control

Detailed and Complete Alternative Models

  • MC68HC908JK1CDW: Similar features with different package and pin configuration
  • MC68HC908JK3CDW: Enhanced memory capacity and additional peripherals

In conclusion, the MC68HC908JK3CP microcontroller offers a balance of performance, power efficiency, and integrated peripherals, making it suitable for a wide range of embedded system applications.

Word Count: 513

技術ソリューションにおける MC68HC908JK3CP の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MC68HC908JK3CP microcontroller used for?

    • The MC68HC908JK3CP microcontroller is commonly used in automotive, industrial, and consumer applications for controlling various functions such as engine management, power steering, and HVAC systems.

  2. What are the key features of the MC68HC908JK3CP?

    • The MC68HC908JK3CP features a high-performance CPU, on-chip flash memory, analog and digital peripherals, and low-power operation, making it suitable for a wide range of applications.

  3. How do I program the MC68HC908JK3CP microcontroller?

    • The MC68HC908JK3CP can be programmed using a variety of development tools and programming languages such as C or assembly language. Additionally, it supports in-circuit programming for easy firmware updates.

  4. What communication interfaces does the MC68HC908JK3CP support?

    • The MC68HC908JK3CP supports popular communication interfaces such as SPI, I2C, UART, and CAN, enabling seamless integration with other devices and systems.

  5. Can the MC68HC908JK3CP operate in harsh environments?

    • Yes, the MC68HC908JK3CP is designed to operate in harsh environments with wide temperature ranges and high electromagnetic interference, making it suitable for automotive and industrial applications.

  6. What are the power requirements for the MC68HC908JK3CP?

    • The MC68HC908JK3CP operates at low power and supports various power-saving modes, making it suitable for battery-powered and energy-efficient applications.

  7. Does the MC68HC908JK3CP have built-in security features?

    • Yes, the MC68HC908JK3CP includes security features such as memory protection and secure communication protocols to prevent unauthorized access and ensure data integrity.

  8. What development tools are available for the MC68HC908JK3CP?

    • There are various development tools available for the MC68HC908JK3CP, including integrated development environments (IDEs), debuggers, and emulators from different vendors.

  9. Can the MC68HC908JK3CP be used in real-time control applications?

    • Yes, the MC68HC908JK3CP is well-suited for real-time control applications due to its fast interrupt response, precise timing capabilities, and deterministic execution.

  10. Are there any application notes or reference designs available for the MC68HC908JK3CP?

    • Yes, there are numerous application notes, reference designs, and technical documentation available from the manufacturer and third-party sources to assist in designing solutions using the MC68HC908JK3CP.