NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MC908JK3ECDWER
詳細を表示 DataSheets

MC908JK3ECDWER

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, automotive applications
  • Characteristics: High-performance, low-power consumption, compact size
  • Package: CDWER package
  • Essence: Integrated circuit for controlling and managing electronic devices
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 20 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 28
  • Communication Interfaces: SPI, I2C, UART
  • Timers: 4-channel 16-bit timers
  • Analog-to-Digital Converter (ADC): 10-bit resolution, 8 channels

Detailed Pin Configuration

The MC908JK3ECDWER microcontroller has a total of 28 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RESET - Reset pin for initializing the microcontroller
  4. IRQ - Interrupt request pin
  5. PTA0 - General-purpose input/output pin
  6. PTA1 - General-purpose input/output pin
  7. PTA2 - General-purpose input/output pin
  8. PTA3 - General-purpose input/output pin
  9. PTA4 - General-purpose input/output pin
  10. PTA5 - General-purpose input/output pin
  11. PTA6 - General-purpose input/output pin
  12. PTA7 - General-purpose input/output pin
  13. PTB0 - General-purpose input/output pin
  14. PTB1 - General-purpose input/output pin
  15. PTB2 - General-purpose input/output pin
  16. PTB3 - General-purpose input/output pin
  17. PTB4 - General-purpose input/output pin
  18. PTB5 - General-purpose input/output pin
  19. PTB6 - General-purpose input/output pin
  20. PTB7 - General-purpose input/output pin
  21. PTC0 - General-purpose input/output pin
  22. PTC1 - General-purpose input/output pin
  23. PTC2 - General-purpose input/output pin
  24. PTC3 - General-purpose input/output pin
  25. PTC4 - General-purpose input/output pin
  26. PTC5 - General-purpose input/output pin
  27. PTC6 - General-purpose input/output pin
  28. PTC7 - General-purpose input/output pin

Functional Features

  • High-performance microcontroller suitable for embedded systems and automotive applications
  • Low-power consumption for energy-efficient operation
  • Compact size allows for integration in space-constrained designs
  • Supports various communication interfaces like SPI, I2C, and UART
  • Multiple timers for precise timing control
  • Analog-to-Digital Converter (ADC) for accurate analog signal measurements

Advantages and Disadvantages

Advantages

  • High-performance capabilities enable efficient processing of complex tasks
  • Low-power consumption extends battery life in portable applications
  • Compact size allows for integration in small form factor devices
  • Versatile communication interfaces facilitate connectivity with other components
  • Precise timing control enhances the accuracy of time-sensitive operations
  • Accurate ADC enables reliable measurement of analog signals

Disadvantages

  • Limited memory capacity compared to higher-bit microcontrollers
  • Restricted number of I/O pins may limit the number of connected peripherals
  • Relatively higher cost compared to lower-end microcontrollers

Working Principles

The MC908JK3ECDWER microcontroller operates based on an 8-bit architecture. It executes instructions stored in its flash memory, utilizing the clock signal to synchronize its internal operations. The microcontroller communicates with external devices through its I/O pins and various communication interfaces. It can process data, control peripherals, and respond to interrupts, making it suitable for a wide range of applications.

Detailed Application Field Plans

The MC908JK3ECDWER microcontroller finds applications in various fields, including:

  1. Automotive: Used in engine control units, dashboard systems, and body control modules.
  2. Industrial Automation: Employed in control systems for machinery, robotics, and process automation.
  3. Consumer Electronics: Integrated into smart home devices, wearable technology, and IoT applications.
  4. Medical Devices: Utilized in medical monitoring equipment, diagnostic devices, and implantable devices.
  5. Home Appliances: Incorporated in smart appliances, HVAC systems, and energy management systems.

Detailed and Complete Alternative Models

  1. MC9S08JM16: Similar 8-bit microcontroller with higher flash memory capacity (up to 64 KB).
  2. MC9S08DZ60: 8-bit micro

技術ソリューションにおける MC908JK3ECDWER の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MC908JK3ECDWER in technical solutions:

  1. Q: What is MC908JK3ECDWER? A: MC908JK3ECDWER is a microcontroller from NXP Semiconductors, specifically designed for embedded control applications.

  2. Q: What are the key features of MC908JK3ECDWER? A: Some key features include an 8-bit CPU core, flash memory, EEPROM, analog-to-digital converters, timers, and various communication interfaces.

  3. Q: What are the typical applications of MC908JK3ECDWER? A: MC908JK3ECDWER is commonly used in automotive systems, industrial automation, consumer electronics, and other embedded control applications.

  4. Q: How much flash memory does MC908JK3ECDWER have? A: MC908JK3ECDWER has 32 KB of flash memory, which can be used for storing program code and data.

  5. Q: Can I interface MC908JK3ECDWER with external devices? A: Yes, MC908JK3ECDWER supports various communication interfaces like SPI, I2C, UART, and CAN, allowing you to interface with external devices.

  6. Q: Does MC908JK3ECDWER have any analog capabilities? A: Yes, MC908JK3ECDWER has built-in analog-to-digital converters (ADCs) that can be used to measure analog signals.

  7. Q: What is the operating voltage range of MC908JK3ECDWER? A: MC908JK3ECDWER operates within a voltage range of 2.7V to 5.5V.

  8. Q: Can I program MC908JK3ECDWER using a high-level language like C? A: Yes, MC908JK3ECDWER can be programmed using high-level languages like C or assembly language.

  9. Q: Is MC908JK3ECDWER suitable for low-power applications? A: Yes, MC908JK3ECDWER has power-saving features like multiple low-power modes and wake-up interrupts, making it suitable for low-power applications.

  10. Q: Where can I find more information about MC908JK3ECDWER? A: You can refer to the datasheet and reference manual provided by NXP Semiconductors for detailed information about MC908JK3ECDWER.

Please note that the specific details may vary depending on the version and revision of the microcontroller.