MPX2102DP
Product Overview
The MPX2102DP belongs to the category of pressure sensors and is commonly used for measuring absolute or differential pressure in various applications. This sensor is known for its high accuracy, reliability, and robustness. The MPX2102DP is typically available in a small package and can be used in a wide range of industrial and consumer electronic devices.
Basic Information
- Category: Pressure Sensor
- Use: Measuring absolute or differential pressure
- Characteristics: High accuracy, reliability, and robustness
- Package: Small form factor
- Essence: Accurate pressure measurement
- Packaging/Quantity: Typically sold individually or in small quantities
Specifications
- Pressure Range: 0 to 100 kPa
- Supply Voltage: 4.75 to 5.25 V
- Output Type: Analog
- Operating Temperature Range: -40°C to 125°C
- Accuracy: ±1.5% Full Scale
Detailed Pin Configuration
The MPX2102DP features a dual inline package with a total of six pins. The pin configuration is as follows: 1. Vout (Analog Output) 2. Vss (Ground) 3. V+ (Supply Voltage) 4. NC (No Connection) 5. NC (No Connection) 6. Pout (Pressure Port)
Functional Features
- High accuracy and linearity
- Low power consumption
- Robust design for harsh environments
- Wide operating temperature range
Advantages and Disadvantages
Advantages
- Accurate pressure measurement
- Suitable for harsh environments
- Low power consumption
Disadvantages
- Limited pressure range compared to some other sensors
- Analog output requires additional signal conditioning
Working Principles
The MPX2102DP operates on the principle of piezoresistive sensing. When pressure is applied to the sensor, the resistance of the piezoresistive elements changes, resulting in a corresponding change in the output voltage. This voltage is then proportional to the applied pressure.
Detailed Application Field Plans
The MPX2102DP is widely used in various applications, including: - Automotive systems - Industrial automation - HVAC systems - Medical devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the MPX2102DP include: - MPX2050DP - MPX5700AP - MPXHZ6250A
In conclusion, the MPX2102DP is a reliable and accurate pressure sensor suitable for a wide range of applications. Its robust design and high accuracy make it a popular choice in industries where precise pressure measurement is essential.
Word Count: 411
技術ソリューションにおける MPX2102DP の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the MPX2102DP?
- The MPX2102DP is a dual-port, integrated pressure sensor designed for use in various technical solutions.
What is the operating voltage range of the MPX2102DP?
- The operating voltage range of the MPX2102DP is typically 4.75V to 5.25V.
What is the pressure range that the MPX2102DP can measure?
- The MPX2102DP can measure pressure within the range of 0 to 100 kPa (0 to 14.5 psi).
How does the MPX2102DP communicate with microcontrollers or other devices?
- The MPX2102DP communicates using an analog output signal, typically a ratiometric output proportional to the applied pressure.
What are the typical applications of the MPX2102DP?
- The MPX2102DP is commonly used in applications such as industrial controls, HVAC systems, and medical equipment where precise pressure measurement is required.
Is the MPX2102DP suitable for measuring liquid pressure?
- Yes, the MPX2102DP is suitable for measuring both gas and liquid pressures.
What is the accuracy of the MPX2102DP?
- The MPX2102DP has a typical accuracy of ±2.5% full scale over the specified temperature range.
Can the MPX2102DP withstand harsh environmental conditions?
- The MPX2102DP is designed to operate in harsh environments and can withstand certain levels of shock and vibration.
Does the MPX2102DP require calibration?
- It is recommended to calibrate the MPX2102DP periodically to ensure accurate pressure measurements.
What is the thermal sensitivity coefficient of the MPX2102DP?
- The thermal sensitivity coefficient of the MPX2102DP is typically 0.02% full scale/°C.