NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MPXAZ4250AC6T1
詳細を表示 DataSheets

MPXAZ4250AC6T1

Introduction

The MPXAZ4250AC6T1 is a pressure sensor belonging to the category of integrated circuits. This sensor is designed for use in various applications that require accurate and reliable pressure measurements. Its characteristics, packaging, quantity, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are detailed below.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Pressure sensing in various applications
  • Characteristics: Accurate, reliable, compact
  • Package: Surface mount
  • Essence: Precision pressure measurement
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Pressure Range: 0 to 250 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale Span (typical)

Detailed Pin Configuration

The MPXAZ4250AC6T1 has a total of 6 pins: 1. Vout (Analog Output) 2. Vss (Ground) 3. Vdd (Supply Voltage) 4. N/C (No Connection) 5. N/C (No Connection) 6. N/C (No Connection)

Functional Features

  • High accuracy and reliability
  • Compact and surface-mountable design
  • Wide operating temperature range
  • Low power consumption

Advantages and Disadvantages

Advantages

  • Accurate pressure measurement
  • Reliable performance
  • Compact form factor
  • Suitable for wide temperature ranges

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MPXAZ4250AC6T1 operates on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their values, resulting in a corresponding change in the output voltage. This voltage is proportional to the applied pressure and can be calibrated to provide accurate pressure readings.

Detailed Application Field Plans

The MPXAZ4250AC6T1 is suitable for various applications, including: - Automotive systems - Industrial automation - Medical devices - HVAC systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MPXAZ4250AC6T1 include: - MPX5700AP - MPXV5010DP - MPXHZ6250A

In conclusion, the MPXAZ4250AC6T1 is a precision pressure sensor with a wide range of applications and reliable performance. Its compact design and high accuracy make it a suitable choice for demanding pressure measurement requirements.

[Word Count: 366]

技術ソリューションにおける MPXAZ4250AC6T1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MPXAZ4250AC6T1 pressure sensor used for?

    • The MPXAZ4250AC6T1 pressure sensor is commonly used to measure absolute pressure in various technical solutions, such as industrial automation, automotive applications, and medical devices.

  2. What is the operating voltage range of the MPXAZ4250AC6T1?

    • The operating voltage range of the MPXAZ4250AC6T1 is typically 4.75V to 5.25V, making it suitable for a wide range of electronic systems.

  3. How does the MPXAZ4250AC6T1 communicate with microcontrollers or other devices?

    • The MPXAZ4250AC6T1 typically communicates using analog voltage output, which can be interfaced with microcontrollers or ADCs for further processing.

  4. What is the pressure range that the MPXAZ4250AC6T1 can measure?

    • The MPXAZ4250AC6T1 can measure pressure within a range of 0 to 250 kPa (0 to 36.3 psi), making it suitable for many industrial and automotive applications.

  5. Is the MPXAZ4250AC6T1 suitable for harsh environments?

    • Yes, the MPXAZ4250AC6T1 is designed to withstand harsh environments and is often used in applications where exposure to dust, moisture, or extreme temperatures is a concern.

  6. What is the accuracy of the MPXAZ4250AC6T1 sensor?

    • The MPXAZ4250AC6T1 sensor typically has an accuracy of around ±1.5% full scale, providing reliable pressure measurements for most applications.

  7. Can the MPXAZ4250AC6T1 be used for liquid pressure measurement?

    • Yes, the MPXAZ4250AC6T1 can be used for measuring pressure in both gas and liquid environments, making it versatile for various technical solutions.

  8. Does the MPXAZ4250AC6T1 require calibration?

    • The MPXAZ4250AC6T1 may require initial calibration to ensure accurate pressure readings, especially if high precision is needed for a specific application.

  9. What are the typical mounting considerations for the MPXAZ4250AC6T1?

    • The MPXAZ4250AC6T1 is often mounted using O-ring seals or other appropriate sealing methods to ensure proper pressure measurement and protection from external elements.

  10. Are there any special handling or storage requirements for the MPXAZ4250AC6T1?

    • It is recommended to handle and store the MPXAZ4250AC6T1 according to the manufacturer's guidelines to prevent damage to the sensor and maintain its performance characteristics.