NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MPXR4030VVU264
詳細を表示 DataSheets

MPXR4030VVU264

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low power consumption
  • Package: VVU264
  • Essence: Regulates voltage to ensure stable power supply
  • Packaging/Quantity: Individually packaged, quantity per package varies

Specifications

  • Input Voltage Range: 4.5V - 28V
  • Output Voltage Range: 0.8V - 5.5V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MPXR4030VVU264 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching pin
  6. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low power consumption contributes to energy savings
  • Overcurrent and overtemperature protection for enhanced safety
  • Adjustable output voltage for flexibility in different applications

Advantages

  • Compact size and lightweight design
  • Easy to integrate into various electronic systems
  • Reliable performance under different operating conditions
  • Provides stable and regulated power supply
  • Suitable for both industrial and consumer applications

Disadvantages

  • Limited maximum output current may not be suitable for high-power devices
  • Requires additional external components for proper operation
  • Higher cost compared to some alternative models

Working Principles

The MPXR4030VVU264 operates based on a switching regulator principle. It converts the input voltage to the desired output voltage by rapidly switching the input voltage on and off. This switching action is controlled by an internal circuit that adjusts the duty cycle to maintain a stable output voltage.

Detailed Application Field Plans

The MPXR4030VVU264 is commonly used in various electronic devices and systems, including:

  1. Mobile devices: Smartphones, tablets, portable gaming consoles
  2. Industrial equipment: Power supplies, motor control systems, LED lighting
  3. Automotive electronics: Car audio systems, navigation systems, dashboard displays
  4. Home appliances: Smart home devices, kitchen appliances, entertainment systems

Detailed and Complete Alternative Models

  1. MPXR4025VVU264: Similar specifications with a slightly lower maximum output current of 2.5A.
  2. MPXR4040VVU264: Similar specifications with a higher maximum output current of 4A.
  3. MPXR4060VVU264: Similar specifications with a higher maximum output current of 6A.

These alternative models provide options for different power requirements and can be considered based on specific application needs.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける MPXR4030VVU264 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MPXR4030VVU264 in technical solutions:

  1. Q: What is MPXR4030VVU264? A: MPXR4030VVU264 is a specific model of pressure sensor manufactured by a company called NXP Semiconductors.

  2. Q: What is the typical operating voltage range for MPXR4030VVU264? A: The typical operating voltage range for MPXR4030VVU264 is 2.7V to 3.6V.

  3. Q: What is the output type of MPXR4030VVU264? A: MPXR4030VVU264 provides an analog output, typically in the form of a voltage signal.

  4. Q: What is the pressure range that MPXR4030VVU264 can measure? A: MPXR4030VVU264 can measure pressure within a range of 0 to 30 psi (pounds per square inch).

  5. Q: What is the accuracy of MPXR4030VVU264? A: The accuracy of MPXR4030VVU264 is typically specified as a percentage of full-scale span, such as ±1% FS.

  6. Q: Can MPXR4030VVU264 be used with liquids as well as gases? A: Yes, MPXR4030VVU264 can be used with both liquids and gases, as long as they are compatible with its materials of construction.

  7. Q: Does MPXR4030VVU264 require any external calibration? A: MPXR4030VVU264 is factory calibrated and does not require any external calibration. However, it may need zeroing or adjustment during installation.

  8. Q: What is the response time of MPXR4030VVU264? A: The response time of MPXR4030VVU264 is typically specified as the time taken to reach 90% of the final output value, such as 1 ms.

  9. Q: Can MPXR4030VVU264 be used in harsh environments? A: Yes, MPXR4030VVU264 is designed to operate in harsh environments and can withstand certain levels of shock, vibration, and temperature extremes.

  10. Q: What are some typical applications for MPXR4030VVU264? A: MPXR4030VVU264 is commonly used in various technical solutions, including industrial automation, HVAC systems, medical devices, automotive applications, and more.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of MPXR4030VVU264.