NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MPXS2010VLQ120
詳細を表示 DataSheets

MPXS2010VLQ120

Product Overview

  • Category: Sensor
  • Use: Pressure measurement
  • Characteristics: High accuracy, compact size, digital output
  • Package: Surface mount package
  • Essence: MEMS pressure sensor
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Pressure Range: 0 to 10 kPa
  • Supply Voltage: 3.3 V
  • Output Type: Digital (I2C)
  • Operating Temperature: -40°C to +125°C
  • Accuracy: ±1% full scale
  • Response Time: <1 ms
  • Dimensions: 5 mm x 5 mm x 1.7 mm

Detailed Pin Configuration

The MPXS2010VLQ120 has the following pin configuration:

  1. VDD - Supply voltage
  2. GND - Ground
  3. SDA - I2C data line
  4. SCL - I2C clock line

Functional Features

  • High accuracy pressure measurement
  • Digital output for easy integration with microcontrollers
  • Low power consumption
  • Wide operating temperature range
  • Small form factor for space-constrained applications

Advantages and Disadvantages

Advantages: - High accuracy ensures precise pressure measurements - Compact size allows for easy integration into various devices - Digital output simplifies communication with microcontrollers - Wide operating temperature range enables usage in extreme environments

Disadvantages: - Limited pressure range of 0 to 10 kPa may not be suitable for high-pressure applications - Requires I2C interface for communication, which may not be supported by all systems

Working Principles

The MPXS2010VLQ120 is based on Microelectromechanical Systems (MEMS) technology. It utilizes a pressure-sensitive diaphragm that deflects under the applied pressure. This deflection is converted into an electrical signal by integrated circuitry within the sensor. The digital output provides accurate pressure readings that can be easily interpreted by microcontrollers.

Detailed Application Field Plans

The MPXS2010VLQ120 is suitable for various applications, including:

  1. Medical devices: Blood pressure monitors, respiratory equipment
  2. Industrial automation: Pressure control systems, pneumatic systems
  3. Automotive: Tire pressure monitoring systems, engine management
  4. Consumer electronics: Smartwatches, smartphones, tablets

Detailed and Complete Alternative Models

  1. MPXS2100VLQ120: Pressure range of 0 to 100 kPa
  2. MPXS2200VLQ120: Pressure range of 0 to 200 kPa
  3. MPXS2300VLQ120: Pressure range of 0 to 300 kPa
  4. MPXS2400VLQ120: Pressure range of 0 to 400 kPa

These alternative models offer different pressure ranges to cater to specific application requirements.

Word count: 275 words

技術ソリューションにおける MPXS2010VLQ120 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MPXS2010VLQ120 in technical solutions:

  1. Question: What is MPXS2010VLQ120?
    Answer: MPXS2010VLQ120 is a pressure sensor manufactured by Freescale Semiconductor, commonly used in various technical applications.

  2. Question: What is the operating voltage range for MPXS2010VLQ120?
    Answer: The operating voltage range for MPXS2010VLQ120 is typically between 4.75V and 5.25V.

  3. Question: What is the pressure range that MPXS2010VLQ120 can measure?
    Answer: MPXS2010VLQ120 can measure pressure within a range of 0 to 10 kilopascals (kPa).

  4. Question: What is the output signal format of MPXS2010VLQ120?
    Answer: MPXS2010VLQ120 provides an analog output signal, typically in the form of a voltage proportional to the measured pressure.

  5. Question: Can MPXS2010VLQ120 be used in both liquid and gas pressure measurements?
    Answer: Yes, MPXS2010VLQ120 can be used for measuring both liquid and gas pressures, as long as they fall within the specified pressure range.

  6. Question: What is the accuracy of MPXS2010VLQ120?
    Answer: The accuracy of MPXS2010VLQ120 is typically within ±1% of the full-scale pressure range.

  7. Question: Does MPXS2010VLQ120 require any external calibration?
    Answer: MPXS2010VLQ120 is factory-calibrated and does not require any external calibration. However, it is recommended to verify its performance periodically.

  8. Question: Can MPXS2010VLQ120 withstand harsh environmental conditions?
    Answer: MPXS2010VLQ120 is designed to operate in a wide temperature range and can withstand certain levels of shock and vibration, making it suitable for various environments.

  9. Question: What is the response time of MPXS2010VLQ120?
    Answer: The response time of MPXS2010VLQ120 is typically less than 1 millisecond (ms), allowing for real-time pressure measurements.

  10. Question: Can MPXS2010VLQ120 be easily integrated into existing systems?
    Answer: Yes, MPXS2010VLQ120 comes in a compact package with standard electrical connections, making it relatively easy to integrate into existing technical solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements and manufacturer specifications.