NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
P89LPC935FHN,151
詳細を表示 DataSheets

P89LPC935FHN,151

Product Overview

Category

The P89LPC935FHN,151 belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications that require low power consumption and high performance.

Characteristics

  • Low power consumption
  • High performance
  • Compact size
  • Versatile functionality

Package

The P89LPC935FHN,151 is available in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The P89LPC935FHN,151 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 20 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 256 bytes
  • Number of I/O Pins: 32
  • Operating Voltage Range: 2.7V to 5.5V
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The P89LPC935FHN,151 has a total of 32 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. P0.0 - General-purpose I/O pin
  3. P0.1 - General-purpose I/O pin
  4. P0.2 - General-purpose I/O pin
  5. P0.3 - General-purpose I/O pin
  6. P0.4 - General-purpose I/O pin
  7. P0.5 - General-purpose I/O pin
  8. P0.6 - General-purpose I/O pin
  9. P0.7 - General-purpose I/O pin
  10. RST - Reset pin
  11. P1.0 - General-purpose I/O pin
  12. P1.1 - General-purpose I/O pin
  13. P1.2 - General-purpose I/O pin
  14. P1.3 - General-purpose I/O pin
  15. P1.4 - General-purpose I/O pin
  16. P1.5 - General-purpose I/O pin
  17. P1.6 - General-purpose I/O pin
  18. P1.7 - General-purpose I/O pin
  19. XTAL1 - Crystal oscillator input
  20. XTAL2 - Crystal oscillator output
  21. GND - Ground
  22. P2.0 - General-purpose I/O pin
  23. P2.1 - General-purpose I/O pin
  24. P2.2 - General-purpose I/O pin
  25. P2.3 - General-purpose I/O pin
  26. P2.4 - General-purpose I/O pin
  27. P2.5 - General-purpose I/O pin
  28. P2.6 - General-purpose I/O pin
  29. P2.7 - General-purpose I/O pin
  30. VSS - Ground
  31. ALE/PROG - Address Latch Enable/Program pin
  32. PSEN - Program Store Enable pin

Functional Features

The P89LPC935FHN,151 offers several functional features that enhance its usability and performance:

  • Low power consumption: The microcontroller is designed to operate efficiently with minimal power requirements.
  • High-performance CPU: With a maximum clock speed of 20 MHz, it can handle complex tasks effectively.
  • Versatile I/O capabilities: The 32 I/O pins allow for flexible interfacing with external devices.
  • Communication interfaces: UART, SPI, and I2C interfaces enable seamless communication with other devices.
  • Timers/Counters: The microcontroller includes three timers/counters for precise timing and event counting.
  • Analog-to-Digital Converter (ADC): The built-in ADC allows for analog signal conversion, enabling sensor integration.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • High-performance CPU enables efficient processing of complex tasks.
  • Versatile I/O capabilities provide flexibility in interfacing with external devices.
  • Compact size allows for space-efficient designs.
  • Built-in communication interfaces simplify device connectivity.

Disadvantages

  • Limited program memory size (8 KB) may restrict the complexity of applications.
  • Limited RAM size (256 bytes) may limit the amount of data that can be stored during runtime.

Working Principles

The P89LPC935FHN,151 operates based on an 8-bit architecture. It executes instructions stored in its program memory, processes data using its CPU, and interacts with

技術ソリューションにおける P89LPC935FHN,151 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of P89LPC935FHN,151 in technical solutions:

  1. Q: What is the P89LPC935FHN,151 microcontroller used for? A: The P89LPC935FHN,151 is a microcontroller commonly used in various technical solutions, such as industrial automation, consumer electronics, and embedded systems.

  2. Q: What is the operating voltage range of the P89LPC935FHN,151? A: The P89LPC935FHN,151 operates within a voltage range of 2.7V to 5.5V.

  3. Q: How much flash memory does the P89LPC935FHN,151 have? A: The P89LPC935FHN,151 has 8KB of flash memory for program storage.

  4. Q: Can I use the P89LPC935FHN,151 for analog applications? A: Yes, the P89LPC935FHN,151 has built-in analog-to-digital converters (ADCs) that can be used for analog applications.

  5. Q: Does the P89LPC935FHN,151 support communication protocols like UART, SPI, or I2C? A: Yes, the P89LPC935FHN,151 supports UART, SPI, and I2C communication protocols, making it versatile for various connectivity requirements.

  6. Q: What is the maximum clock frequency of the P89LPC935FHN,151? A: The P89LPC935FHN,151 can operate at a maximum clock frequency of 20MHz.

  7. Q: Can I use the P89LPC935FHN,151 in battery-powered applications? A: Yes, the P89LPC935FHN,151 is designed to be power-efficient and can be used in battery-powered applications.

  8. Q: Does the P89LPC935FHN,151 have any built-in timers or counters? A: Yes, the P89LPC935FHN,151 has multiple built-in timers and counters that can be utilized for various timing and counting functions.

  9. Q: Is the P89LPC935FHN,151 programmable in C/C++? A: Yes, the P89LPC935FHN,151 can be programmed using C/C++ programming languages, making it easier for developers to work with.

  10. Q: Are there any development tools available for the P89LPC935FHN,151? A: Yes, NXP provides development tools like IDEs (Integrated Development Environments) and debuggers specifically designed for the P89LPC935FHN,151 microcontroller.