NXP USA Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SPC5606BK0MLL6
詳細を表示 DataSheets

SPC5606BK0MLL6

Overview

Category: Microcontroller
Use: Embedded Systems
Characteristics: High-performance, low-power consumption
Package: LQFP-144
Essence: Advanced microcontroller for automotive applications
Packaging/Quantity: Tray / 250 units per tray

Specifications

  • Architecture: Power Architecture® Technology
  • CPU Core: e200z4d
  • Clock Frequency: Up to 64 MHz
  • Flash Memory: 1 MB
  • RAM: 128 KB
  • Operating Voltage: 2.7V - 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • I/O Pins: 100
  • Communication Interfaces: CAN, LIN, FlexRay, SPI, I2C, UART
  • Analog-to-Digital Converter (ADC): 12-bit, 16 channels
  • Timers: 32-bit, up to 8 channels
  • Security Features: Hardware Security Module (HSM), Secure Boot, Memory Protection Unit (MPU)

Pin Configuration

The SPC5606BK0MLL6 microcontroller has a total of 144 pins arranged in a Low Quad Flat Package (LQFP). The pin configuration is as follows:

SPC5606BK0MLL6 Pin Configuration

Functional Features

  • High-performance CPU core for efficient processing
  • Extensive communication interfaces for seamless integration with other systems
  • Advanced security features to protect sensitive data
  • Robust analog-to-digital converter for accurate sensor measurements
  • Flexible timers for precise timing control
  • Wide operating temperature range for automotive applications

Advantages and Disadvantages

Advantages: - High-performance and low-power consumption - Extensive communication interfaces for versatile connectivity - Advanced security features for data protection - Robust analog-to-digital converter for accurate measurements

Disadvantages: - Limited flash memory capacity compared to some other microcontrollers - Higher cost compared to entry-level microcontrollers

Working Principles

The SPC5606BK0MLL6 microcontroller is based on Power Architecture® Technology. It utilizes the e200z4d CPU core, which provides high performance while maintaining low power consumption. The microcontroller operates at a clock frequency of up to 64 MHz and supports various communication interfaces such as CAN, LIN, FlexRay, SPI, I2C, and UART.

It incorporates advanced security features including a Hardware Security Module (HSM), Secure Boot, and Memory Protection Unit (MPU) to ensure the integrity and confidentiality of data. The microcontroller also features a 12-bit, 16-channel analog-to-digital converter for precise sensor measurements and 32-bit timers for accurate timing control.

Detailed Application Field Plans

The SPC5606BK0MLL6 microcontroller is specifically designed for automotive applications. Its high-performance capabilities, low-power consumption, and extensive communication interfaces make it suitable for various automotive systems, including:

  1. Engine Control Units (ECUs)
  2. Body Control Modules (BCMs)
  3. Infotainment Systems
  4. Advanced Driver Assistance Systems (ADAS)
  5. Electric Power Steering (EPS) Systems
  6. Transmission Control Units (TCUs)
  7. Lighting Control Modules
  8. Climate Control Systems

Detailed and Complete Alternative Models

  1. SPC5606BKL0MLL6
  2. SPC5606BKM0MLL6
  3. SPC5606BKN0MLL6
  4. SPC5606BKP0MLL6
  5. SPC5606BKR0MLL6

These alternative models are part of the same microcontroller family and offer similar features and specifications, with slight variations in memory capacity or pin configuration.

Note: The content provided above is a sample entry and does not represent actual information about the SPC5606BK0MLL6 microcontroller.

技術ソリューションにおける SPC5606BK0MLL6 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of SPC5606BK0MLL6 in technical solutions:

  1. Q: What is SPC5606BK0MLL6? A: SPC5606BK0MLL6 is a microcontroller from the SPC56 family, specifically designed for automotive applications.

  2. Q: What are the key features of SPC5606BK0MLL6? A: Some key features include a Power Architecture® e200z4 core, on-chip flash memory, CAN and LIN interfaces, and various peripherals for automotive systems.

  3. Q: What are the typical applications of SPC5606BK0MLL6? A: SPC5606BK0MLL6 is commonly used in automotive systems such as engine management, body control modules, instrument clusters, and advanced driver-assistance systems (ADAS).

  4. Q: What is the maximum clock frequency supported by SPC5606BK0MLL6? A: The maximum clock frequency supported by SPC5606BK0MLL6 is typically 80 MHz.

  5. Q: How much flash memory does SPC5606BK0MLL6 have? A: SPC5606BK0MLL6 has up to 1 MB of on-chip flash memory for program storage.

  6. Q: Can SPC5606BK0MLL6 communicate with other devices? A: Yes, SPC5606BK0MLL6 supports various communication interfaces such as CAN, LIN, SPI, I2C, and UART for seamless integration with other devices.

  7. Q: Does SPC5606BK0MLL6 have any built-in security features? A: Yes, SPC5606BK0MLL6 offers built-in security features like a hardware cryptographic module, secure boot, and memory protection unit (MPU) for enhanced system security.

  8. Q: What is the operating temperature range of SPC5606BK0MLL6? A: The operating temperature range of SPC5606BK0MLL6 is typically -40°C to +125°C, making it suitable for automotive environments.

  9. Q: Can SPC5606BK0MLL6 be programmed using standard development tools? A: Yes, SPC5606BK0MLL6 can be programmed using popular development tools such as CodeWarrior, S32 Design Studio, and Green Hills MULTI.

  10. Q: Is there any documentation available for SPC5606BK0MLL6? A: Yes, comprehensive documentation including datasheets, reference manuals, and application notes are available from the manufacturer's website for SPC5606BK0MLL6.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements. It is always recommended to refer to the official documentation and consult with technical experts for accurate information.