ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BZX84C6V8ET1
詳細を表示 DataSheets

BZX84C6V8ET1 - Diode Encyclopedia Entry

Introduction

The BZX84C6V8ET1 is a diode belonging to the category of voltage regulator diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diode
  • Use: The BZX84C6V8ET1 is used for voltage regulation and protection in various electronic circuits.
  • Characteristics: It has a low power dissipation, high reliability, and precise voltage regulation characteristics.
  • Package: SOT-23 package
  • Essence: The diode regulates voltage and protects the circuit from voltage spikes.
  • Packaging/Quantity: Typically available in reels with varying quantities.

Specifications

  • Voltage Rating: 6.8V
  • Power Dissipation: 350mW
  • Forward Current: 225mA
  • Reverse Leakage Current: 100nA
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BZX84C6V8ET1 has three pins: Anode, Cathode, and Gate. The anode is connected to the positive terminal, the cathode to the negative terminal, and the gate controls the flow of current.

Functional Features

  • Voltage Regulation: The diode maintains a constant voltage across the circuit.
  • Overvoltage Protection: It protects the circuit from voltage spikes and overvoltage conditions.
  • Low Power Dissipation: It minimizes energy loss in the circuit.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • High reliability
  • Low power dissipation

Disadvantages

  • Limited current handling capacity
  • Sensitive to temperature variations

Working Principles

The BZX84C6V8ET1 operates based on the principle of Zener breakdown. When the voltage across the diode reaches the specified value, it starts conducting in the reverse direction, regulating the voltage across the circuit.

Detailed Application Field Plans

The BZX84C6V8ET1 finds applications in various fields including: - Voltage regulation in power supplies - Overvoltage protection in consumer electronics - Signal conditioning in communication systems

Detailed and Complete Alternative Models

Some alternative models to the BZX84C6V8ET1 include: - 1N4732A - BZT52C6V8S

In conclusion, the BZX84C6V8ET1 is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its characteristics make it suitable for a wide range of applications, and it has several alternative models available in the market.

[Word Count: 366]

技術ソリューションにおける BZX84C6V8ET1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the BZX84C6V8ET1?

    • The BZX84C6V8ET1 is a 6.8V Zener diode designed for voltage regulation and overvoltage protection in electronic circuits.

  2. What is the maximum power dissipation of the BZX84C6V8ET1?

    • The maximum power dissipation of the BZX84C6V8ET1 is 250mW.

  3. What is the operating temperature range of the BZX84C6V8ET1?

    • The BZX84C6V8ET1 operates within a temperature range of -65°C to +150°C.

  4. How does the BZX84C6V8ET1 provide voltage regulation?

    • The BZX84C6V8ET1 operates in reverse breakdown mode, maintaining a constant voltage drop across its terminals when forward biased.

  5. What are the typical applications of the BZX84C6V8ET1?

    • The BZX84C6V8ET1 is commonly used for voltage stabilization, surge suppression, and as a reference voltage source in various electronic circuits.

  6. What is the maximum reverse leakage current of the BZX84C6V8ET1?

    • The maximum reverse leakage current of the BZX84C6V8ET1 is typically 100nA at its rated voltage.

  7. Can the BZX84C6V8ET1 be used for ESD protection?

    • Yes, the BZX84C6V8ET1 can be utilized for electrostatic discharge (ESD) protection due to its ability to clamp voltages above its breakdown voltage.

  8. What is the package type of the BZX84C6V8ET1?

    • The BZX84C6V8ET1 is available in a SOT-23 surface mount package.

  9. What is the tolerance of the BZX84C6V8ET1's zener voltage?

    • The tolerance of the BZX84C6V8ET1's zener voltage is typically ±5%.

  10. Is the BZX84C6V8ET1 suitable for low-power applications?

    • Yes, the BZX84C6V8ET1's low power dissipation makes it well-suited for low-power electronic applications such as sensor interfaces and battery-powered devices.