ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CAT28C256H13I15
詳細を表示 DataSheets

CAT28C256H13I15

Product Overview

Category

The CAT28C256H13I15 belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic systems and devices.

Characteristics

  • Non-volatile: Retains stored data even when power is turned off.
  • High capacity: Offers a storage capacity of 256 kilobits.
  • Fast access time: Provides quick retrieval of stored data.
  • Low power consumption: Operates efficiently with minimal power requirements.

Package

The CAT28C256H13I15 is available in a compact integrated circuit (IC) package.

Essence

The essence of this product lies in its ability to store and retrieve data reliably, making it an essential component in many electronic applications.

Packaging/Quantity

The CAT28C256H13I15 is typically packaged in reels or tubes, with each package containing a specific quantity of ICs.

Specifications

  • Storage Capacity: 256 kilobits
  • Access Time: <100 nanoseconds
  • Supply Voltage: 2.7V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: >10 years
  • Endurance: >1 million write cycles

Detailed Pin Configuration

The CAT28C256H13I15 has a total of 28 pins, which are assigned specific functions as follows:

  1. A0-A14: Address Inputs
  2. CE: Chip Enable
  3. OE: Output Enable
  4. WE: Write Enable
  5. VCC: Power Supply
  6. GND: Ground
  7. DQ0-DQ7: Data Input/Output

Functional Features

  • Random access: Allows direct access to any location within the memory array.
  • Byte-wise programming: Enables individual bytes to be programmed without affecting the entire memory.
  • Erase capability: Supports full chip erasure or sector-based erasure.
  • Write protection: Provides write protection for specific memory sectors.

Advantages and Disadvantages

Advantages

  • Non-volatile nature ensures data retention even during power loss.
  • High storage capacity meets the requirements of various applications.
  • Fast access time enables quick retrieval of data.
  • Low power consumption prolongs battery life in portable devices.

Disadvantages

  • Limited endurance compared to other types of memory.
  • Relatively higher cost per bit compared to some alternatives.
  • Requires additional circuitry for programming and erasing operations.

Working Principles

The CAT28C256H13I15 utilizes a combination of electronic circuits and semiconductor technology to store and retrieve data. It employs a floating-gate transistor structure that allows charges to be trapped, representing binary information (0s and 1s). The stored data can be accessed by applying appropriate voltage levels to the address inputs and control pins.

Detailed Application Field Plans

The CAT28C256H13I15 finds extensive use in various electronic systems and devices, including but not limited to: - Microcontrollers - Embedded systems - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. CAT28C256H13I-90 - Similar specifications with a faster access time of <90 nanoseconds.
  2. CAT28C256H13I-12 - Similar specifications with a lower operating temperature range of -40°C to +70°C.
  3. CAT28C256H13I-25 - Similar specifications with a higher endurance of >2 million write cycles.

These alternative models offer similar functionality and compatibility, providing flexibility in choosing the most suitable option for specific applications.

Word count: 515 words

技術ソリューションにおける CAT28C256H13I15 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CAT28C256H13I15 in technical solutions:

  1. Q: What is CAT28C256H13I15? A: CAT28C256H13I15 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by ON Semiconductor.

  2. Q: What is the capacity of CAT28C256H13I15? A: CAT28C256H13I15 has a capacity of 256 kilobits, which is equivalent to 32 kilobytes.

  3. Q: What are the typical applications of CAT28C256H13I15? A: CAT28C256H13I15 is commonly used for storing configuration data, firmware, or other small amounts of non-volatile memory in various electronic devices.

  4. Q: How does CAT28C256H13I15 connect to a microcontroller or other digital circuitry? A: CAT28C256H13I15 connects using a standard parallel interface, typically consisting of address lines, data lines, control signals (such as chip enable, write enable, and output enable), and power supply connections.

  5. Q: Can CAT28C256H13I15 be reprogrammed multiple times? A: Yes, CAT28C256H13I15 is an EEPROM, which means it can be electrically erased and reprogrammed multiple times.

  6. Q: What is the operating voltage range of CAT28C256H13I15? A: CAT28C256H13I15 operates within a voltage range of 4.5V to 5.5V.

  7. Q: Does CAT28C256H13I15 require any external components for operation? A: CAT28C256H13I15 requires a power supply, decoupling capacitors, and pull-up resistors for proper operation.

  8. Q: What is the access time of CAT28C256H13I15? A: CAT28C256H13I15 has an access time of 150 nanoseconds (ns), which refers to the time it takes to read or write data after providing the necessary address and control signals.

  9. Q: Can CAT28C256H13I15 operate in harsh environments? A: CAT28C256H13I15 is designed to operate within industrial temperature ranges (-40°C to +85°C) and can withstand moderate levels of shock and vibration.

  10. Q: Are there any special considerations for programming CAT28C256H13I15? A: Yes, CAT28C256H13I15 requires specific voltage levels, timing requirements, and programming algorithms to ensure successful programming and data integrity. The datasheet provided by the manufacturer should be consulted for detailed programming instructions.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and up-to-date information.