画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CAV24C16YE-GT3

CAV24C16YE-GT3

Product Overview

Category

The CAV24C16YE-GT3 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is primarily used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The CAV24C16YE-GT3 retains stored data even when power is removed.
  • High storage capacity: This chip has a storage capacity of 16 kilobits (2 kilobytes).
  • Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.
  • Fast data transfer: The CAV24C16YE-GT3 supports high-speed data transfer rates.
  • Reliable performance: It offers excellent data retention and endurance characteristics.

Package and Quantity

The CAV24C16YE-GT3 is available in a small form factor package, such as a surface-mount SOIC (Small Outline Integrated Circuit). It is typically sold in reels or tubes containing multiple units.

Specifications

  • Memory capacity: 16 kilobits (2 kilobytes)
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating voltage: 1.7V to 5.5V
  • Data transfer rate: Up to 400 kHz
  • Endurance: 1 million write cycles
  • Data retention: 100 years

Detailed Pin Configuration

The CAV24C16YE-GT3 chip has a standard pin configuration with eight pins. The following table provides a detailed description of each pin:

| Pin Name | Function | |----------|----------| | VCC | Power supply voltage input | | GND | Ground reference | | SDA | Serial data line for I2C communication | | SCL | Serial clock line for I2C communication | | WP | Write protect pin (optional) | | A0, A1 | Address selection pins | | NC | No connection |

Functional Features

The CAV24C16YE-GT3 offers the following functional features:

  • Random access: Allows reading and writing of data at any memory location.
  • Byte-level operations: Supports individual byte read and write operations.
  • Hardware write protection: The WP pin can be used to protect the memory from accidental writes.
  • Software write protection: Provides software-controlled write protection using specific commands.

Advantages and Disadvantages

Advantages

  • High storage capacity in a compact form factor.
  • Low power consumption, suitable for battery-powered devices.
  • Fast data transfer rate for efficient data handling.
  • Excellent data retention and endurance characteristics.
  • Flexible write protection options for enhanced security.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per kilobit compared to larger capacity EEPROMs.
  • Requires an I2C interface, which may not be compatible with all systems.

Working Principles

The CAV24C16YE-GT3 utilizes electrically erasable programmable read-only memory technology. It consists of a grid of memory cells that can be individually programmed or erased using electrical signals. The stored data is retained even when power is removed, making it non-volatile.

The chip communicates with the host system through the I2C interface, allowing for easy integration into various electronic devices. Data can be written to or read from specific memory locations using appropriate commands.

Detailed Application Field Plans

The CAV24C16YE-GT3 finds applications in a wide range of electronic devices, including but not limited to:

  1. Microcontrollers: Used for storing program code, configuration settings, and calibration data.
  2. Computers: Employed in BIOS (Basic Input/Output System) chips for storing system firmware.
  3. Consumer electronics: Integrated into devices like smart TVs, set-top boxes, and audio systems for data storage purposes.
  4. Automotive electronics: Utilized in vehicle control modules for storing critical information and configuration settings.
  5. Industrial automation: Used in programmable logic controllers (PLCs) and industrial control systems for data storage.

Detailed and Complete Alternative Models

  1. CAV24C08YE-GT3: A similar EEPROM chip with half the storage capacity (8 kilobits).
  2. CAV24C32YE-GT3: A higher-capacity EEPROM chip with 32 kilobits of storage.
  3. CAV24C64YE-GT3: An even larger EEPROM chip with 64 kilobits of storage.

These alternative models offer different storage capacities to suit varying application requirements.

Word count: 610 words

技術ソリューションにおける CAV24C16YE-GT3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of CAV24C16YE-GT3 in technical solutions:

1. What is CAV24C16YE-GT3? CAV24C16YE-GT3 is a 16Kbit I2C-compatible Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by a specific company.

2. What is the operating voltage range for CAV24C16YE-GT3? The operating voltage range for CAV24C16YE-GT3 is typically between 1.7V and 5.5V.

3. What is the maximum clock frequency supported by CAV24C16YE-GT3? CAV24C16YE-GT3 supports a maximum clock frequency of 400kHz.

4. How many bytes of data can be stored in CAV24C16YE-GT3? CAV24C16YE-GT3 has a storage capacity of 16 kilobits, which is equivalent to 2048 bytes.

5. Can CAV24C16YE-GT3 be used for both read and write operations? Yes, CAV24C16YE-GT3 supports both read and write operations, allowing you to store and retrieve data as needed.

6. What is the endurance rating of CAV24C16YE-GT3? CAV24C16YE-GT3 has an endurance rating of at least 1 million write cycles, ensuring long-term reliability.

7. Does CAV24C16YE-GT3 have any built-in security features? No, CAV24C16YE-GT3 does not have any built-in security features. It is a standard EEPROM without additional security measures.

8. Is CAV24C16YE-GT3 suitable for automotive applications? Yes, CAV24C16YE-GT3 is designed to meet the requirements of automotive applications and can withstand harsh operating conditions.

9. Can multiple CAV24C16YE-GT3 devices be connected together on the same I2C bus? Yes, multiple CAV24C16YE-GT3 devices can be connected together on the same I2C bus, allowing for expanded storage capacity if needed.

10. What are some typical applications of CAV24C16YE-GT3? CAV24C16YE-GT3 is commonly used in various technical solutions such as automotive systems, industrial control, consumer electronics, and medical devices for data storage and retrieval purposes.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and application requirements.