ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
FDBL0200N100
詳細を表示 DataSheets

FDBL0200N100

Product Overview

Category

The FDBL0200N100 belongs to the category of power MOSFETs.

Use

It is used as a switching device in various electronic circuits and applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The FDBL0200N100 is typically available in a TO-263 package.

Essence

This MOSFET is essential for controlling high-power loads in electronic systems.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 200V
  • Continuous Drain Current (ID): 2A
  • On-Resistance (RDS(on)): 0.25Ω
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 8nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The FDBL0200N100 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low on-resistance minimizes power loss and improves efficiency.
  • Fast switching speed enables rapid control of power flow.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed

Disadvantages

  • Sensitivity to static electricity
  • Gate drive requirements may be more complex compared to lower voltage MOSFETs

Working Principles

The FDBL0200N100 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The FDBL0200N100 is commonly used in the following applications: - Switching power supplies - Motor control - Inverters - LED lighting

Detailed and Complete Alternative Models

Some alternative models to the FDBL0200N100 include: - IRF540N - STP16NF06L - FQP30N06L

In conclusion, the FDBL0200N100 power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of power control applications.

[Word Count: 328]

技術ソリューションにおける FDBL0200N100 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is FDBL0200N100?

    • FDBL0200N100 is a fast-recovery diode commonly used in power electronic applications.

  2. What are the key specifications of FDBL0200N100?

    • The key specifications include a maximum repetitive reverse voltage of 1000V, a forward current of 20A, and a fast recovery time.

  3. How is FDBL0200N100 typically used in technical solutions?

    • FDBL0200N100 is often used in rectifier circuits, freewheeling diodes, and snubber circuits in power supplies, inverters, and motor control applications.

  4. What are the advantages of using FDBL0200N100 in technical solutions?

    • The advantages include its fast recovery time, low forward voltage drop, and high surge capability, making it suitable for high-frequency and high-power applications.

  5. Are there any specific thermal considerations when using FDBL0200N100?

    • Yes, proper heat sinking and thermal management are important to ensure the diode operates within its temperature limits for optimal performance and reliability.

  6. Can FDBL0200N100 be used in parallel configurations for higher current applications?

    • Yes, FDBL0200N100 can be used in parallel to increase the overall current handling capacity in high-current applications.

  7. What are the typical failure modes of FDBL0200N100 and how can they be mitigated?

    • Common failure modes include thermal runaway and overstress due to high currents or voltage spikes. Proper design, current limiting, and overvoltage protection can help mitigate these risks.

  8. Is FDBL0200N100 suitable for automotive or industrial applications?

    • Yes, FDBL0200N100 is suitable for both automotive and industrial applications due to its rugged construction and high reliability.

  9. Are there any application notes or reference designs available for using FDBL0200N100?

    • Yes, the manufacturer provides application notes and reference designs to assist engineers in implementing FDBL0200N100 in various technical solutions.

  10. Where can I purchase FDBL0200N100 and what are the typical lead times?

    • FDBL0200N100 can be purchased from authorized distributors, and typical lead times may vary based on demand and availability.