MC34164DM-5R2 belongs to the category of voltage supervisors.
It is primarily used for monitoring and controlling the voltage levels in electronic circuits.
MC34164DM-5R2 comes in a small outline package (SOP) format.
The essence of MC34164DM-5R2 lies in its ability to monitor and control voltage levels, ensuring reliable operation of electronic circuits.
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
MC34164DM-5R2 has the following pin configuration:
MC34164DM-5R2 works by continuously monitoring the input voltage and comparing it to a preset threshold. If the voltage falls below the threshold, the reset output is activated, indicating a low voltage condition.
MC34164DM-5R2 finds applications in various fields, including: 1. Power supply units 2. Battery-powered devices 3. Industrial control systems 4. Automotive electronics 5. Telecommunications equipment
Some alternative models that can be considered as alternatives to MC34164DM-5R2 are: 1. MAX823 2. TL7705 3. ADM708 4. LTC2917 5. TPS3839
These models offer similar functionality and can be used interchangeably based on specific requirements.
In conclusion, MC34164DM-5R2 is a voltage supervisor with accurate monitoring capabilities, low power consumption, and a wide operating voltage range. It finds applications in various industries and has alternative models available for different needs.
Sure! Here are 10 common questions and answers related to the application of MC34164DM-5R2 in technical solutions:
Q: What is MC34164DM-5R2? A: MC34164DM-5R2 is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of MC34164DM-5R2? A: The operating voltage range of MC34164DM-5R2 is typically between 2.0V and 6.0V.
Q: How does MC34164DM-5R2 help in technical solutions? A: MC34164DM-5R2 helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: Can MC34164DM-5R2 be used with both positive and negative supply voltages? A: No, MC34164DM-5R2 is designed for use with positive supply voltages only.
Q: What is the typical reset threshold voltage of MC34164DM-5R2? A: The typical reset threshold voltage of MC34164DM-5R2 is 4.65V.
Q: Does MC34164DM-5R2 have an adjustable reset threshold voltage? A: No, MC34164DM-5R2 has a fixed reset threshold voltage and cannot be adjusted.
Q: Can MC34164DM-5R2 tolerate voltage spikes or transients? A: Yes, MC34164DM-5R2 has built-in hysteresis and can tolerate voltage spikes or transients up to 50V.
Q: What is the typical quiescent current consumption of MC34164DM-5R2? A: The typical quiescent current consumption of MC34164DM-5R2 is 10µA.
Q: Can MC34164DM-5R2 be used in battery-powered applications? A: Yes, MC34164DM-5R2's low quiescent current makes it suitable for battery-powered applications where power efficiency is crucial.
Q: Is MC34164DM-5R2 available in different package options? A: Yes, MC34164DM-5R2 is available in various package options, including SOIC (Small Outline Integrated Circuit) and PDIP (Plastic Dual In-Line Package).
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.