ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MMBT2132T3
詳細を表示 DataSheets

MMBT2132T3: Transistor Encyclopedia Entry

Introduction

The MMBT2132T3 is a type of bipolar junction transistor (BJT) that belongs to the category of small signal transistors. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MMBT2132T3.

Basic Information Overview

  • Category: Small Signal Transistor
  • Use: Amplification and switching in low-power applications
  • Characteristics: High gain, low noise, and compact size
  • Package: SOT-23
  • Essence: NPN BJT
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

  • Maximum Collector-Base Voltage (VCB): 40V
  • Maximum Collector-Emitter Voltage (VCE): 40V
  • Maximum Emitter-Base Voltage (VEB): 5V
  • Continuous Collector Current (IC): 600mA
  • Total Power Dissipation (PT): 350mW
  • Transition Frequency (fT): 250MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MMBT2132T3 has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High current gain
  • Low noise
  • Fast switching speed
  • Compact SOT-23 package

Advantages and Disadvantages

Advantages

  • Small form factor
  • High transition frequency
  • Low power dissipation

Disadvantages

  • Limited maximum collector current
  • Narrow operating temperature range

Working Principles

The MMBT2132T3 operates based on the principles of bipolar junction transistors. When a small current flows into the base terminal, it controls a much larger current between the collector and emitter terminals, allowing for amplification and switching functions.

Detailed Application Field Plans

The MMBT2132T3 is suitable for various low-power applications, including: - Audio amplifiers - Signal amplification circuits - Switching circuits in portable electronic devices

Detailed and Complete Alternative Models

Some alternative models to the MMBT2132T3 include: - 2N3904 - BC547 - 2N2222

In conclusion, the MMBT2132T3 is a small signal transistor with high gain, low noise, and fast switching characteristics, making it suitable for low-power amplification and switching applications.

[Word count: 346]

技術ソリューションにおける MMBT2132T3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of MMBT2132T3 in technical solutions:

  1. What is MMBT2132T3?

    • MMBT2132T3 is a general-purpose NPN bipolar junction transistor (BJT) commonly used for amplification and switching applications.

  2. What are the key specifications of MMBT2132T3?

    • The MMBT2132T3 has a maximum collector current (Ic) of 600mA, a maximum collector-emitter voltage (Vce) of 40V, and a maximum power dissipation of 350mW.

  3. How can MMBT2132T3 be used for amplification?

    • MMBT2132T3 can be used as a simple amplifier by biasing it in the active region and applying an input signal to the base terminal. The amplified output signal is then obtained from the collector terminal.

  4. In what types of switching applications can MMBT2132T3 be used?

    • MMBT2132T3 can be used in low-power switching applications such as driving small relays, LEDs, or small motors.

  5. What are the typical operating conditions for MMBT2132T3?

    • The typical operating conditions for MMBT2132T3 include a collector current (Ic) of 100mA, a collector-emitter voltage (Vce) of 10V, and a base current (Ib) of 10mA.

  6. Can MMBT2132T3 be used in high-frequency applications?

    • MMBT2132T3 has limited high-frequency performance and is more suitable for low to moderate frequency applications.

  7. What are the recommended biasing configurations for MMBT2132T3?

    • Common biasing configurations for MMBT2132T3 include fixed bias, emitter bias, and voltage-divider bias.

  8. Does MMBT2132T3 require a heat sink for thermal management?

    • For most low-power applications, MMBT2132T3 does not require a heat sink. However, in high-power applications or when operating at high ambient temperatures, a heat sink may be necessary.

  9. What are the typical package options for MMBT2132T3?

    • MMBT2132T3 is commonly available in SOT-23 surface-mount packages, which are suitable for compact and space-constrained designs.

  10. Are there any important considerations for designing with MMBT2132T3?

    • Designers should consider the maximum ratings, thermal considerations, and proper biasing to ensure reliable and efficient operation of MMBT2132T3 in their technical solutions.