ON Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
NM25C04M8

NM25C04M8

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Memory
  • Characteristics: High density, low power consumption, small package size
  • Package: SOP-8 (Small Outline Package)
  • Essence: EEPROM (Electrically Erasable Programmable Read-Only Memory)
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Memory Size: 4 Kilobits (512 bytes)
  • Organization: 512 x 8 bits
  • Supply Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1 Million cycles
  • Data Retention: 200 Years
  • Interface: I2C (Inter-Integrated Circuit)

Detailed Pin Configuration

The NM25C04M8 IC has a total of 8 pins arranged as follows:

``` ┌───┬───┐ │ 1 │ 8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │

技術ソリューションにおける NM25C04M8 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of NM25C04M8 in technical solutions:

  1. Q: What is NM25C04M8? A: NM25C04M8 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by a specific company.

  2. Q: What is the capacity of NM25C04M8? A: NM25C04M8 has a capacity of 4 kilobits, which is equivalent to 512 bytes.

  3. Q: What is the operating voltage range for NM25C04M8? A: The operating voltage range for NM25C04M8 is typically between 1.7V and 5.5V.

  4. Q: How can NM25C04M8 be interfaced with a microcontroller? A: NM25C04M8 can be interfaced with a microcontroller using standard I2C (Inter-Integrated Circuit) communication protocol.

  5. Q: Can NM25C04M8 be used for storing program code? A: Yes, NM25C04M8 can be used for storing small program code or configuration data in embedded systems.

  6. Q: What is the maximum operating frequency of NM25C04M8? A: The maximum operating frequency of NM25C04M8 is typically around 400 kHz.

  7. Q: Is NM25C04M8 capable of multiple write cycles? A: Yes, NM25C04M8 supports multiple write cycles, allowing data to be updated or modified.

  8. Q: Does NM25C04M8 have built-in write protection? A: Yes, NM25C04M8 provides hardware write protection by using a write-protect pin or software write protection through specific commands.

  9. Q: Can NM25C04M8 operate in extreme temperature conditions? A: Yes, NM25C04M8 is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  10. Q: What are some typical applications of NM25C04M8? A: NM25C04M8 is commonly used in various technical solutions such as industrial automation, consumer electronics, automotive systems, and IoT devices for storing configuration data, calibration values, or small program code.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of the technical solution.