Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BA08CC0WT
詳細を表示 DataSheets

BA08CC0WT

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Thermal shutdown protection - Short circuit protection

Package: TO-220

Essence: BA08CC0WT is a voltage regulator IC that provides stable and regulated output voltage for various electronic devices.

Packaging/Quantity: Available in reels of 1000 units.

Specifications

  • Input Voltage Range: 7V to 35V
  • Output Voltage Range: 1.2V to 30V
  • Dropout Voltage: 0.5V (typical)
  • Output Current: 1A
  • Quiescent Current: 5mA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

BA08CC0WT has three pins:

  1. Input Pin (VIN): Connects to the input voltage source.
  2. Output Pin (VOUT): Provides the regulated output voltage.
  3. Ground Pin (GND): Connected to the ground reference.

Functional Features

  • Low Dropout Voltage: The BA08CC0WT has a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • High Output Voltage Accuracy: It provides precise and stable output voltage, minimizing fluctuations and ensuring reliable performance of connected devices.
  • Low Quiescent Current: The IC consumes minimal current when in standby mode, reducing power consumption and extending battery life.
  • Thermal Shutdown Protection: It incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Short Circuit Protection: The IC automatically shuts down in case of a short circuit, protecting both the regulator and the connected devices.

Advantages and Disadvantages

Advantages: - Reliable voltage regulation - Low dropout voltage - High output voltage accuracy - Thermal and short circuit protection

Disadvantages: - Limited output current (1A) - Restricted input voltage range (7V to 35V)

Working Principles

BA08CC0WT is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The BA08CC0WT is widely used in various electronic devices that require a stable and regulated power supply. Some common applications include:

  1. Consumer Electronics: Used in televisions, audio systems, and gaming consoles to provide reliable power to the internal circuitry.
  2. Automotive Electronics: Employed in automotive infotainment systems, navigation units, and dashboard displays to ensure stable voltage supply.
  3. Industrial Control Systems: Integrated into industrial automation equipment, motor control systems, and PLCs for consistent power delivery.
  4. Telecommunications: Utilized in routers, switches, and network equipment to maintain a steady voltage for uninterrupted communication.

Detailed and Complete Alternative Models

  1. LM7805: A popular alternative with similar specifications and pin configuration.
  2. LT1084: Offers higher output current capability and wider input voltage range.
  3. LM317: Provides adjustable output voltage and higher output current capacity.

These alternatives can be considered based on specific requirements and compatibility with the application.

Word count: 446 words

技術ソリューションにおける BA08CC0WT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BA08CC0WT in technical solutions:

  1. Q: What is BA08CC0WT? A: BA08CC0WT is a specific model or component used in technical solutions, typically referring to a specific electronic device or circuit.

  2. Q: What are the key features of BA08CC0WT? A: The key features of BA08CC0WT may include high efficiency, low power consumption, compact size, wide input voltage range, and built-in protection mechanisms.

  3. Q: In which applications can BA08CC0WT be used? A: BA08CC0WT can be used in various applications such as power supplies, battery chargers, motor control systems, LED lighting, and other electronic devices requiring stable voltage regulation.

  4. Q: What is the input voltage range supported by BA08CC0WT? A: The input voltage range supported by BA08CC0WT typically varies, but it commonly covers a range from 5V to 24V DC.

  5. Q: What is the output voltage range provided by BA08CC0WT? A: The output voltage range provided by BA08CC0WT depends on the specific configuration and can be adjusted accordingly, but it often ranges from 1.2V to 12V DC.

  6. Q: How efficient is BA08CC0WT in converting input voltage to output voltage? A: BA08CC0WT is known for its high efficiency, typically achieving conversion efficiencies above 90%.

  7. Q: Does BA08CC0WT have any built-in protection mechanisms? A: Yes, BA08CC0WT often includes built-in protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown to ensure safe operation.

  8. Q: Can BA08CC0WT be used in automotive applications? A: Yes, BA08CC0WT is suitable for automotive applications as it can handle the required voltage ranges and has protection features against voltage spikes and temperature variations.

  9. Q: Is BA08CC0WT compatible with microcontrollers or other control systems? A: Yes, BA08CC0WT can be easily integrated with microcontrollers or other control systems as it provides a stable output voltage that can be controlled through external signals.

  10. Q: Where can I find more information about the application of BA08CC0WT in technical solutions? A: You can refer to the datasheet or technical documentation provided by the manufacturer of BA08CC0WT for detailed information on its application in technical solutions.

Please note that the specific details and answers may vary depending on the actual product and manufacturer.