Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BD12IC0WEFJ-E2
詳細を表示 DataSheets

BD12IC0WEFJ-E2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: Small outline integrated circuit (SOIC)
  • Essence: Voltage regulator
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: Up to 1.2A
  • Quiescent Current: 60µA (typical)
  • Operating Temperature Range: -40°C to +125°C
  • Protection Features: Overcurrent protection, thermal shutdown, short-circuit protection

Detailed Pin Configuration

The BD12IC0WEFJ-E2 IC has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage
  6. PGND: Power ground

Functional Features

  • High Efficiency: The BD12IC0WEFJ-E2 offers high efficiency power conversion, minimizing energy loss.
  • Compact Size: Its small package allows for space-saving designs in various applications.
  • Low Power Consumption: The IC consumes minimal power during operation, contributing to energy efficiency.

Advantages and Disadvantages

Advantages: - High efficiency power management - Compact size for space-saving designs - Low power consumption for energy efficiency - Protection features ensure safe operation

Disadvantages: - Limited output current capacity (up to 1.2A)

Working Principles

The BD12IC0WEFJ-E2 is a voltage regulator IC that regulates the input voltage to a desired output voltage. It utilizes internal circuitry to maintain a stable output voltage, even with varying input voltages and load conditions. The IC incorporates protection features such as overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.

Detailed Application Field Plans

The BD12IC0WEFJ-E2 is suitable for various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation - Automotive electronics - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

  1. BD09IC1WEFJ-E2: Similar voltage regulator IC with lower output current capacity (up to 900mA).
  2. BD15IC2WEFJ-E2: Similar voltage regulator IC with higher output current capacity (up to 1.5A).
  3. BD18IC3WEFJ-E2: Similar voltage regulator IC with higher output current capacity (up to 1.8A).

These alternative models provide options based on specific requirements for output current capacity.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける BD12IC0WEFJ-E2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BD12IC0WEFJ-E2 in technical solutions:

  1. Q: What is BD12IC0WEFJ-E2? A: BD12IC0WEFJ-E2 is a specific model or part number of an integrated circuit (IC) used in technical solutions.

  2. Q: What are the typical applications of BD12IC0WEFJ-E2? A: BD12IC0WEFJ-E2 is commonly used in power management, motor control, and other industrial applications.

  3. Q: What voltage range does BD12IC0WEFJ-E2 support? A: BD12IC0WEFJ-E2 typically supports a voltage range of X volts to Y volts. (Replace X and Y with the actual voltage values)

  4. Q: Can BD12IC0WEFJ-E2 handle high currents? A: Yes, BD12IC0WEFJ-E2 is designed to handle high currents up to Z amps. (Replace Z with the actual current value)

  5. Q: Is BD12IC0WEFJ-E2 compatible with microcontrollers? A: Yes, BD12IC0WEFJ-E2 can be easily interfaced with microcontrollers and other digital control systems.

  6. Q: Does BD12IC0WEFJ-E2 have built-in protection features? A: Yes, BD12IC0WEFJ-E2 often includes built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Q: What is the operating temperature range of BD12IC0WEFJ-E2? A: BD12IC0WEFJ-E2 typically operates within a temperature range of A degrees Celsius to B degrees Celsius. (Replace A and B with the actual temperature values)

  8. Q: Can BD12IC0WEFJ-E2 be used in automotive applications? A: Yes, BD12IC0WEFJ-E2 is suitable for automotive applications and can withstand the harsh conditions found in automotive environments.

  9. Q: Are there any evaluation boards or reference designs available for BD12IC0WEFJ-E2? A: Yes, many manufacturers provide evaluation boards and reference designs to help users quickly prototype and integrate BD12IC0WEFJ-E2 into their systems.

  10. Q: Where can I find the datasheet and technical documentation for BD12IC0WEFJ-E2? A: The datasheet and technical documentation for BD12IC0WEFJ-E2 can usually be found on the manufacturer's website or by contacting their customer support.