Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BD30GA3WEFJ-E2
詳細を表示 DataSheets

BD30GA3WEFJ-E2

Product Overview

  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 18V
  • Output Current: Up to 3A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 50µA
  • Ripple Rejection: 70dB
  • Protection Features: Overcurrent, Overtemperature, Undervoltage Lockout

Detailed Pin Configuration

The BD30GA3WEFJ-E2 package consists of six pins:

  1. VIN - Input voltage pin
  2. GND - Ground pin
  3. EN - Enable pin for turning the regulator on/off
  4. FB - Feedback pin for setting the output voltage
  5. PG - Power Good pin indicating the output voltage is within regulation
  6. VOUT - Output voltage pin

Functional Features

  • High Efficiency: The BD30GA3WEFJ-E2 offers high efficiency, reducing power loss and maximizing battery life.
  • Low Power Consumption: With a quiescent current of only 50µA, it minimizes power consumption in standby or low-load conditions.
  • Overcurrent Protection: The regulator includes overcurrent protection, safeguarding against excessive current draw.
  • Overtemperature Protection: It features overtemperature protection, preventing damage due to excessive heat.
  • Undervoltage Lockout: The undervoltage lockout feature ensures proper operation even at low input voltages.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Overcurrent and overtemperature protection enhance reliability - Wide input voltage range allows for versatile applications

Disadvantages: - Limited output current of up to 3A may not be suitable for high-power applications - Requires external components for stability and filtering

Working Principles

The BD30GA3WEFJ-E2 is a voltage regulator that converts an input voltage within the range of 4.5V to 24V into a regulated output voltage between 1.2V and 18V. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) is used to set the desired output voltage, which is then regulated by the internal control circuitry. The enable pin (EN) allows for on/off control of the regulator.

Detailed Application Field Plans

The BD30GA3WEFJ-E2 is commonly used in various electronic devices and systems, including but not limited to:

  1. Mobile Devices: Smartphones, tablets, portable media players
  2. Computer Systems: Laptops, desktops, servers
  3. Consumer Electronics: TVs, gaming consoles, audio amplifiers
  4. Industrial Equipment: Power supplies, motor drives, LED lighting
  5. Automotive Electronics: Infotainment systems, navigation units, lighting controls

Detailed and Complete Alternative Models

  1. BD30GA3WEFJ-E1: Similar to BD30GA3WEFJ-E2 with minor differences in specifications
  2. BD30GB3WEFJ-E2: Higher output current variant, capable of delivering up to 5A
  3. BD30GC3WEFJ-E2: Lower output current variant, suitable for low-power applications

These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements.

Word count: 511 words

技術ソリューションにおける BD30GA3WEFJ-E2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BD30GA3WEFJ-E2 in technical solutions:

  1. Q: What is BD30GA3WEFJ-E2? A: BD30GA3WEFJ-E2 is a specific model or component used in technical solutions, typically in electronic devices.

  2. Q: What are the key features of BD30GA3WEFJ-E2? A: The key features of BD30GA3WEFJ-E2 may include high performance, low power consumption, compact size, compatibility with various interfaces, and advanced functionality.

  3. Q: In which technical solutions can BD30GA3WEFJ-E2 be used? A: BD30GA3WEFJ-E2 can be used in a wide range of technical solutions such as consumer electronics, industrial automation, automotive systems, medical devices, and telecommunications.

  4. Q: What are the advantages of using BD30GA3WEFJ-E2 in technical solutions? A: Some advantages of using BD30GA3WEFJ-E2 may include improved efficiency, enhanced functionality, cost-effectiveness, reliability, and compatibility with other components.

  5. Q: How does BD30GA3WEFJ-E2 contribute to energy efficiency in technical solutions? A: BD30GA3WEFJ-E2 may have built-in power management features, low power consumption, or energy-saving algorithms that help optimize energy usage in technical solutions.

  6. Q: Can BD30GA3WEFJ-E2 be easily integrated into existing technical solutions? A: BD30GA3WEFJ-E2 is designed to be compatible with standard interfaces and protocols, making it relatively easy to integrate into existing technical solutions.

  7. Q: Are there any specific technical requirements for using BD30GA3WEFJ-E2? A: The specific technical requirements may vary depending on the application, but generally, BD30GA3WEFJ-E2 may require a certain voltage range, operating temperature, or interface compatibility.

  8. Q: What is the lifespan of BD30GA3WEFJ-E2 in technical solutions? A: The lifespan of BD30GA3WEFJ-E2 can vary depending on usage conditions and proper maintenance, but it is typically designed to have a long operational life.

  9. Q: Can BD30GA3WEFJ-E2 be customized for specific technical solution requirements? A: Depending on the manufacturer or supplier, BD30GA3WEFJ-E2 may offer customization options such as firmware modifications, interface adaptations, or additional features to meet specific requirements.

  10. Q: Where can I purchase BD30GA3WEFJ-E2 for my technical solution? A: BD30GA3WEFJ-E2 can be purchased from authorized distributors, online marketplaces, or directly from the manufacturer's website. It is recommended to check with the manufacturer for authorized sources.