Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BD33HC5MEFJ-LBH2
詳細を表示 DataSheets

BD33HC5MEFJ-LBH2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low dropout voltage regulator
  • Package: TO-252-5L (DPAK)
  • Essence: Voltage regulator with a fixed output voltage
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Output Current: Up to 500mA
  • Dropout Voltage: 300mV at 500mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. NC: No connection
  4. EN: Enable pin
  5. VOUT: Output voltage pin

Functional Features

  • High efficiency: The BD33HC5MEFJ-LBH2 offers high efficiency, minimizing power dissipation and maximizing battery life.
  • Low dropout voltage: With a dropout voltage of only 300mV at 500mA, the regulator can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
  • Enable pin: The enable pin allows for easy control of the regulator's operation, enabling or disabling the output as needed.

Advantages and Disadvantages

Advantages: - High efficiency design - Low dropout voltage - Enable pin for easy control

Disadvantages: - Limited output current (up to 500mA)

Working Principles

The BD33HC5MEFJ-LBH2 is a linear voltage regulator that operates by maintaining a constant output voltage regardless of changes in the input voltage or load conditions. It achieves this through a feedback mechanism that adjusts the internal circuitry to provide the desired output voltage.

Detailed Application Field Plans

The BD33HC5MEFJ-LBH2 is commonly used in various applications where a stable and regulated 3.3V power supply is required. Some typical application fields include:

  1. Consumer Electronics: Used in portable devices, such as smartphones, tablets, and digital cameras.
  2. Industrial Automation: Provides reliable power for control systems, sensors, and actuators.
  3. Automotive Electronics: Used in automotive modules, infotainment systems, and lighting applications.
  4. IoT Devices: Powers low-power IoT devices, such as sensors, wearables, and smart home devices.

Detailed and Complete Alternative Models

  1. BD33HC0WEFJ-LBH2: Similar to BD33HC5MEFJ-LBH2 but with an adjustable output voltage.
  2. BD33LC5MEFJ-LBH2: Low dropout voltage regulator with a fixed 3.3V output voltage.
  3. BD33MC5MEFJ-LBH2: Higher current version with a maximum output current of 1A.

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

Word count: 346 words

技術ソリューションにおける BD33HC5MEFJ-LBH2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BD33HC5MEFJ-LBH2 in technical solutions:

  1. Q: What is BD33HC5MEFJ-LBH2? A: BD33HC5MEFJ-LBH2 is a specific model or component used in technical solutions, typically in electronic circuits or systems.

  2. Q: What are the key features of BD33HC5MEFJ-LBH2? A: The key features of BD33HC5MEFJ-LBH2 may include voltage regulation, current protection, thermal shutdown, low dropout voltage, and high efficiency.

  3. Q: How does BD33HC5MEFJ-LBH2 regulate voltage? A: BD33HC5MEFJ-LBH2 regulates voltage by maintaining a constant output voltage regardless of input voltage fluctuations within its specified range.

  4. Q: What is the maximum current that BD33HC5MEFJ-LBH2 can handle? A: The maximum current handling capacity of BD33HC5MEFJ-LBH2 is typically mentioned in its datasheet and can vary depending on the specific model.

  5. Q: Can BD33HC5MEFJ-LBH2 protect against overcurrent or short circuits? A: Yes, BD33HC5MEFJ-LBH2 usually has built-in protection mechanisms like overcurrent protection and short circuit protection to safeguard the circuitry.

  6. Q: Does BD33HC5MEFJ-LBH2 have any thermal protection? A: Yes, BD33HC5MEFJ-LBH2 often includes thermal shutdown functionality to prevent overheating and potential damage to the component.

  7. Q: What is the dropout voltage of BD33HC5MEFJ-LBH2? A: Dropout voltage refers to the minimum voltage difference between the input and output of the regulator for it to operate correctly. The specific dropout voltage of BD33HC5MEFJ-LBH2 can be found in its datasheet.

  8. Q: Can BD33HC5MEFJ-LBH2 be used in high-efficiency applications? A: Yes, BD33HC5MEFJ-LBH2 is designed to provide high efficiency, minimizing power loss and maximizing energy conversion.

  9. Q: What are some typical applications of BD33HC5MEFJ-LBH2? A: BD33HC5MEFJ-LBH2 can be used in various technical solutions such as power supplies, battery chargers, motor control circuits, LED lighting systems, and other electronic devices requiring stable voltage regulation.

  10. Q: Where can I find more information about BD33HC5MEFJ-LBH2? A: You can refer to the manufacturer's datasheet, technical documentation, or website for detailed specifications, application notes, and additional information about BD33HC5MEFJ-LBH2.