Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BD4836G-TR
詳細を表示 DataSheets

BD4836G-TR

Product Overview

Category

BD4836G-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Integrated circuit
  • Voltage regulation
  • Power management

Package

BD4836G-TR is available in a compact surface-mount package.

Essence

The essence of BD4836G-TR lies in its ability to regulate voltage and manage power efficiently.

Packaging/Quantity

BD4836G-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

The specifications for BD4836G-TR are as follows:

  • Input Voltage Range: 2.5V - 5.5V
  • Output Voltage Range: 0.8V - 3.6V
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration for BD4836G-TR is as follows:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

BD4836G-TR offers the following functional features:

  • Wide input voltage range for compatibility with various power sources.
  • High efficiency for reduced power loss.
  • Overcurrent protection to prevent damage to the device.
  • Thermal shutdown protection to prevent overheating.
  • Enable pin for easy control of the device's operation.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for versatile applications. - High efficiency results in lower power consumption. - Overcurrent and thermal shutdown protection enhance device reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Requires external components for proper operation.

Working Principles

BD4836G-TR operates based on a switching regulator principle. It uses a control circuit to regulate the input voltage and convert it into a stable output voltage. This is achieved through the use of internal power MOSFETs and feedback mechanisms that continuously monitor and adjust the output voltage.

Detailed Application Field Plans

BD4836G-TR finds applications in various electronic devices, including but not limited to:

  1. Mobile phones
  2. Tablets
  3. Portable gaming consoles
  4. Digital cameras
  5. Portable audio players

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to BD4836G-TR are:

  1. BD4837G-TR
  2. BD4838G-TR
  3. BD4839G-TR
  4. BD4840G-TR

These models share similar specifications and pin configurations, making them suitable alternatives for different design requirements.

In conclusion, BD4836G-TR is an integrated circuit used for voltage regulation and power management in electronic devices. Its wide input voltage range, high efficiency, and protection features make it a reliable choice for various applications. However, its limited maximum output current and requirement for external components should be considered when selecting this product.

技術ソリューションにおける BD4836G-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BD4836G-TR in technical solutions:

  1. Q: What is BD4836G-TR? A: BD4836G-TR is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.

  2. Q: What is the purpose of BD4836G-TR? A: The purpose of BD4836G-TR is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: What are the key features of BD4836G-TR? A: Some key features of BD4836G-TR may include high efficiency, low power consumption, small form factor, and built-in protection mechanisms.

  4. Q: What are the typical applications of BD4836G-TR? A: BD4836G-TR can be used in various applications, including consumer electronics, industrial automation, automotive systems, and telecommunications equipment.

  5. Q: How does BD4836G-TR ensure reliability in technical solutions? A: BD4836G-TR incorporates robust design techniques, thermal management features, and protection mechanisms to ensure reliable operation in different environments.

  6. Q: Can BD4836G-TR be used in both AC and DC applications? A: Yes, BD4836G-TR can be used in both AC (alternating current) and DC (direct current) applications, depending on the specific requirements of the technical solution.

  7. Q: Is BD4836G-TR compatible with other components or systems? A: BD4836G-TR is designed to be compatible with a wide range of components and systems, making it versatile for integration into different technical solutions.

  8. Q: What is the voltage and current rating of BD4836G-TR? A: The voltage and current ratings of BD4836G-TR may vary depending on the specific model, but it is typically designed to handle a certain range of voltages and currents.

  9. Q: Are there any design considerations when using BD4836G-TR in technical solutions? A: Yes, some design considerations include thermal management, PCB layout, input/output voltage requirements, and load characteristics.

  10. Q: Where can I find more information about BD4836G-TR? A: You can find more detailed information about BD4836G-TR in the datasheet provided by the manufacturer or by contacting their technical support team.