Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BD9130EFJ-E2
詳細を表示 DataSheets

BD9130EFJ-E2

Product Overview

Category

BD9130EFJ-E2 belongs to the category of integrated circuits (ICs).

Use

The BD9130EFJ-E2 IC is commonly used in electronic devices for power management purposes.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The BD9130EFJ-E2 IC is available in a small form factor package, such as a QFN (Quad Flat No-leads) package.

Essence

The essence of BD9130EFJ-E2 lies in its ability to efficiently regulate and distribute power within electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

The BD9130EFJ-E2 IC is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Input Voltage Range: 4.5V - 18V
  • Output Voltage Range: 0.8V - 5.5V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The BD9130EFJ-E2 IC has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation
  • Current limiting
  • Overtemperature protection
  • Short-circuit protection
  • Soft-start functionality

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatility in various applications
  • Compact size enables integration into space-constrained designs
  • Overcurrent and thermal shutdown protection enhance device safety

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The BD9130EFJ-E2 IC operates by converting the input voltage to a regulated output voltage using a switching regulator. It employs a control loop that continuously monitors the output voltage and adjusts the switching frequency to maintain the desired voltage level.

Detailed Application Field Plans

The BD9130EFJ-E2 IC finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

  1. BD9125EFJ-E2
  2. BD9140EFJ-E2
  3. BD9150EFJ-E2
  4. BD9160EFJ-E2
  5. BD9170EFJ-E2

These alternative models offer similar functionality and characteristics to the BD9130EFJ-E2 IC, providing options for different power requirements and design considerations.

In conclusion, the BD9130EFJ-E2 IC is a highly efficient and compact power management solution used in various electronic devices. Its wide input voltage range, overcurrent protection, and thermal shutdown features make it a reliable choice for power regulation. However, its limited maximum output current and operating temperature range should be considered when selecting this IC for specific applications.

技術ソリューションにおける BD9130EFJ-E2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BD9130EFJ-E2 in technical solutions:

  1. Q: What is BD9130EFJ-E2? A: BD9130EFJ-E2 is a specific model of a power management IC (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of BD9130EFJ-E2? A: Some key features of BD9130EFJ-E2 include high efficiency, low power consumption, multiple output channels, and built-in protection mechanisms.

  3. Q: What technical solutions can BD9130EFJ-E2 be used in? A: BD9130EFJ-E2 can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and IoT devices.

  4. Q: How many output channels does BD9130EFJ-E2 have? A: BD9130EFJ-E2 has multiple output channels, typically ranging from two to four, depending on the specific variant.

  5. Q: What is the input voltage range supported by BD9130EFJ-E2? A: BD9130EFJ-E2 supports a wide input voltage range, typically from 2.7V to 5.5V, making it compatible with various power sources.

  6. Q: Does BD9130EFJ-E2 have any built-in protection features? A: Yes, BD9130EFJ-E2 incorporates various protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: Can BD9130EFJ-E2 operate in different temperature ranges? A: Yes, BD9130EFJ-E2 is designed to operate within a specified temperature range, typically from -40°C to +85°C, ensuring reliable performance in various environments.

  8. Q: Is BD9130EFJ-E2 programmable or configurable? A: No, BD9130EFJ-E2 is not programmable or configurable. It operates based on its default specifications and does not require any external programming.

  9. Q: What are the typical efficiency levels of BD9130EFJ-E2? A: BD9130EFJ-E2 offers high efficiency levels, typically ranging from 85% to 95%, depending on the load conditions and operating parameters.

  10. Q: Are there any application notes or reference designs available for BD9130EFJ-E2? A: Yes, the manufacturer of BD9130EFJ-E2 provides application notes, datasheets, and reference designs that can help users understand and implement the IC in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and documentation provided by the manufacturer of BD9130EFJ-E2.