Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BD9326EFJ-E2
詳細を表示 DataSheets

BD9326EFJ-E2

Product Category: Integrated Circuit

Basic Information Overview: - Category: Power Management IC - Use: Voltage Regulator - Characteristics: High efficiency, low dropout voltage, overcurrent protection - Package: SOP-8 - Essence: Regulating voltage for electronic devices - Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications: - Input Voltage Range: 4.5V to 18V - Output Voltage Range: 0.8V to 15V - Maximum Output Current: 1.5A - Dropout Voltage: 300mV at 1A - Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration: - Pin 1: VIN (Input Voltage) - Pin 2: GND (Ground) - Pin 3: NC (No Connection) - Pin 4: NC (No Connection) - Pin 5: VOUT (Output Voltage) - Pin 6: NC (No Connection) - Pin 7: EN (Enable) - Pin 8: NC (No Connection)

Functional Features: - Overcurrent Protection - Thermal Shutdown - Adjustable Output Voltage

Advantages and Disadvantages: - Advantages: - High Efficiency - Wide Input Voltage Range - Compact Package Size - Disadvantages: - Limited Maximum Output Current - Sensitive to ESD (Electrostatic Discharge)

Working Principles: The BD9326EFJ-E2 is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load current. It achieves this by using a feedback control loop to adjust the output voltage based on the comparison between a reference voltage and the actual output voltage.

Detailed Application Field Plans: - Consumer Electronics: Smartphones, Tablets, Portable Media Players - Industrial Automation: Control Systems, Motor Drives - Automotive: Infotainment Systems, Advanced Driver Assistance Systems (ADAS)

Detailed and Complete Alternative Models: - LM1117-3.3 - LT1086CT - TPS7A4700

This concludes the entry for BD9326EFJ-E2, covering its product category, basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

[Word Count: 331]

技術ソリューションにおける BD9326EFJ-E2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of BD9326EFJ-E2 in technical solutions:

  1. What is the BD9326EFJ-E2?

    • The BD9326EFJ-E2 is a voltage regulator IC designed for use in various technical solutions.

  2. What is the input voltage range of BD9326EFJ-E2?

    • The input voltage range of BD9326EFJ-E2 is typically between 4.5V to 18V.

  3. What is the output voltage range of BD9326EFJ-E2?

    • The output voltage range of BD9326EFJ-E2 is typically between 0.8V to 15V.

  4. What is the maximum output current of BD9326EFJ-E2?

    • The maximum output current of BD9326EFJ-E2 is typically around 3A.

  5. What are the typical applications of BD9326EFJ-E2?

    • BD9326EFJ-E2 is commonly used in applications such as power supplies, industrial equipment, and automotive electronics.

  6. What are the key features of BD9326EFJ-E2?

    • Some key features of BD9326EFJ-E2 include overcurrent protection, thermal shutdown, and high efficiency.

  7. What is the operating temperature range of BD9326EFJ-E2?

    • The operating temperature range of BD9326EFJ-E2 is typically between -40°C to 125°C.

  8. Does BD9326EFJ-E2 require external components for operation?

    • Yes, BD9326EFJ-E2 requires external capacitors and resistors for proper operation.

  9. Is BD9326EFJ-E2 suitable for battery-powered applications?

    • Yes, BD9326EFJ-E2 is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  10. Where can I find the detailed datasheet and application notes for BD9326EFJ-E2?

    • The detailed datasheet and application notes for BD9326EFJ-E2 can be found on the manufacturer's website or through authorized distributors.

I hope these answers provide the information you were looking for! If you need further details on any specific question, feel free to ask.