Rohm Semiconductor
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BR93G86F-3AGTE2
詳細を表示 DataSheets

BR93G86F-3AGTE2

Product Overview

Category

The BR93G86F-3AGTE2 belongs to the category of non-volatile memory, specifically a serial EEPROM (Electrically Erasable Programmable Read-Only Memory).

Use

It is used for storing and retrieving data in various electronic devices such as consumer electronics, industrial equipment, and automotive applications.

Characteristics

  • Non-volatile: Retains stored data even when power is removed.
  • Serial interface: Communicates with the microcontroller through a serial protocol.
  • Low power consumption: Suitable for battery-powered devices.
  • High reliability: Endurance and retention characteristics ensure data integrity.

Package

The BR93G86F-3AGTE2 is available in a small form factor package, typically a SOP8 (Small Outline Package) or similar, making it suitable for space-constrained designs.

Essence

The essence of BR93G86F-3AGTE2 lies in its ability to provide reliable non-volatile memory storage in a compact and energy-efficient package.

Packaging/Quantity

It is commonly supplied in tape and reel packaging, with quantities varying based on the manufacturer's specifications.

Specifications

  • Capacity: 16 Kbit (2 Kbyte)
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Endurance: 10^6 cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The BR93G86F-3AGTE2 typically features the following pin configuration: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input/Output (SI/SO) 4. Write Protect (/WP) 5. VSS (Ground) 6. Serial Data Out (SO) 7. Serial Data In (SI) 8. VCC (Power)

Functional Features

  • Byte and Page Write: Allows data to be written in individual bytes or pages, providing flexibility in data storage.
  • Write Protection: The /WP pin can be utilized to protect the memory from accidental writes.
  • Sequential Read: Enables sequential reading of data, enhancing read performance.

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • High reliability and endurance
  • Flexible write options

Disadvantages

  • Limited capacity compared to other memory types
  • Slower write speeds compared to volatile memory

Working Principles

The BR93G86F-3AGTE2 operates by utilizing an electrically controlled floating gate to store charge, allowing data to be retained without the need for continuous power supply. The serial interface facilitates communication with the microcontroller, enabling seamless data transfer.

Detailed Application Field Plans

The BR93G86F-3AGTE2 finds application in various fields including: - Consumer Electronics: Used in smart home devices, wearables, and digital cameras for data storage. - Industrial Equipment: Employed in automation systems, sensor modules, and control units for parameter storage. - Automotive: Integrated into vehicle systems for storing calibration data, error logs, and configuration settings.

Detailed and Complete Alternative Models

Some alternative models to BR93G86F-3AGTE2 include: - AT24C02C: Similar capacity and interface, offered by Atmel (Microchip Technology). - M24M02: Comparable specifications, provided by STMicroelectronics. - CAT24C02: Another alternative with equivalent functionality, available from ON Semiconductor.

In conclusion, the BR93G86F-3AGTE2 serves as a reliable and compact non-volatile memory solution, catering to diverse application requirements across different industries.

[Word count: 593]

技術ソリューションにおける BR93G86F-3AGTE2 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is BR93G86F-3AGTE2?

    • BR93G86F-3AGTE2 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ROHM Semiconductor.

  2. What are the key features of BR93G86F-3AGTE2?

    • The BR93G86F-3AGTE2 offers a 16Kbit capacity, SPI interface, wide operating voltage range, and low power consumption, making it suitable for various technical solutions.

  3. How can BR93G86F-3AGTE2 be used in technical solutions?

    • BR93G86F-3AGTE2 can be used for data storage, parameter settings, device configuration, and firmware updates in various electronic systems and devices.

  4. What are the typical applications of BR93G86F-3AGTE2?

    • Typical applications include automotive electronics, industrial equipment, consumer electronics, IoT devices, and other embedded systems requiring non-volatile memory.

  5. What are the operating conditions for BR93G86F-3AGTE2?

    • The operating voltage range is typically from 1.8V to 5.5V, with an operating temperature range of -40°C to 85°C.

  6. Is BR93G86F-3AGTE2 compatible with standard microcontrollers?

    • Yes, BR93G86F-3AGTE2 is designed to be easily interfaced with standard microcontrollers through its SPI interface.

  7. Can BR93G86F-3AGTE2 withstand harsh environmental conditions?

    • Yes, BR93G86F-3AGTE2 is designed to withstand mechanical shock, vibration, and temperature variations, making it suitable for rugged applications.

  8. Does BR93G86F-3AGTE2 support data protection and security features?

    • Yes, it provides write protection and a software write protect function to prevent unauthorized access to stored data.

  9. Are there any specific design considerations when using BR93G86F-3AGTE2?

    • Designers should consider proper decoupling, signal integrity, and ESD protection measures to ensure reliable operation in their applications.

  10. Where can I find detailed technical information and application notes for BR93G86F-3AGTE2?

    • Detailed technical information, datasheets, and application notes for BR93G86F-3AGTE2 can be found on the official website of ROHM Semiconductor or through authorized distributors.