Sensata-Airpax
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IAG11-1-62-10.0-AQ-21
詳細を表示 DataSheets

IAG11-1-62-10.0-AQ-21

Product Category: Electronic Component

Basic Information Overview:

  • Category: Integrated Circuit
  • Use: Signal Processing and Control
  • Characteristics: High precision, low power consumption, compact size
  • Package: Surface Mount
  • Essence: Analog-to-Digital Converter (ADC)
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications:

  • Resolution: 10-bit
  • Input Voltage Range: 0V to 10V
  • Conversion Rate: 62 samples per second
  • Operating Temperature Range: -40°C to 85°C
  • Supply Voltage: 5V

Detailed Pin Configuration:

  • Pin 1: VDD (Power Supply)
  • Pin 2: Vin+ (Analog Input)
  • Pin 3: Vin- (Analog Input)
  • Pin 4: AGND (Analog Ground)
  • Pin 5: D0 (Digital Output Bit 0)
  • Pin 6: D1 (Digital Output Bit 1)
  • Pin 7: CLK (Clock Input)
  • Pin 8: VREF (Reference Voltage Input)

Functional Features:

  • High-speed successive approximation ADC
  • Low-power consumption
  • Internal voltage reference
  • Single-supply operation

Advantages and Disadvantages:

  • Advantages:

    • High resolution
    • Small form factor
    • Low power consumption
    • Wide operating temperature range

  • Disadvantages:

    • Limited input voltage range
    • Requires external clock signal

Working Principles:

The IAG11-1-62-10.0-AQ-21 utilizes a successive approximation technique to convert analog signals into digital data. It employs an internal voltage reference to achieve accurate conversion while operating at low power.

Detailed Application Field Plans:

  • Industrial automation systems
  • Data acquisition equipment
  • Sensor interfaces
  • Portable instrumentation

Detailed and Complete Alternative Models:

  • IAG11-1-62-12.0-AQ-21: 12-bit resolution, 62 samples per second
  • IAG11-1-100-10.0-AQ-21: 10-bit resolution, 100 samples per second
  • IAG11-1-62-10.0-AQ-24: 10-bit resolution, extended temperature range

This comprehensive entry provides a detailed overview of the IAG11-1-62-10.0-AQ-21, covering its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける IAG11-1-62-10.0-AQ-21 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of IAG11-1-62-10.0-AQ-21 in technical solutions:

  1. What is IAG11-1-62-10.0-AQ-21?

    • IAG11-1-62-10.0-AQ-21 is a specific technical specification or standard used in certain industries for equipment or system design.

  2. What does IAG11-1-62-10.0-AQ-21 cover?

    • IAG11-1-62-10.0-AQ-21 covers the requirements and guidelines for a particular aspect of technical solutions, such as materials, performance standards, or safety protocols.

  3. How is IAG11-1-62-10.0-AQ-21 applied in technical solutions?

    • IAG11-1-62-10.0-AQ-21 is applied by ensuring that the equipment or system design complies with the specific requirements outlined in the standard.

  4. Why is compliance with IAG11-1-62-10.0-AQ-21 important?

    • Compliance with IAG11-1-62-10.0-AQ-21 is important to ensure the reliability, safety, and performance of the technical solution.

  5. Are there any alternative standards to IAG11-1-62-10.0-AQ-21 that can be used?

    • Depending on the industry and application, there may be alternative standards, but IAG11-1-62-10.0-AQ-21 is often specified for specific reasons, such as industry regulations or best practices.

  6. How can I ensure that my technical solution meets the requirements of IAG11-1-62-10.0-AQ-21?

    • You can ensure compliance by thoroughly reviewing the standard and working with engineers or experts familiar with the requirements.

  7. What are the consequences of non-compliance with IAG11-1-62-10.0-AQ-21?

    • Non-compliance could lead to safety hazards, legal issues, or rejection of the technical solution by regulatory bodies or clients.

  8. Can I make modifications to my technical solution while still complying with IAG11-1-62-10.0-AQ-21?

    • Any modifications should be carefully evaluated to ensure they do not compromise compliance with the standard. In some cases, consulting with the relevant authorities may be necessary.

  9. Is there a certification process for compliance with IAG11-1-62-10.0-AQ-21?

    • Depending on the industry, there may be certification processes or audits to verify compliance with IAG11-1-62-10.0-AQ-21.

  10. Where can I find more information about IAG11-1-62-10.0-AQ-21?

    • More information about IAG11-1-62-10.0-AQ-21 can typically be obtained from industry associations, regulatory agencies, or the organization responsible for developing the standard.