Sensata-Airpax
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IALNK1-1REG4-62-10.0-A
詳細を表示 DataSheets

IALNK1-1REG4-62-10.0-A

Product Overview

Category

IALNK1-1REG4-62-10.0-A belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Regulates voltage to 10.0V
  • Compact size
  • High efficiency
  • Wide input voltage range
  • Overcurrent protection

Package

The IALNK1-1REG4-62-10.0-A comes in a small, surface-mount package.

Essence

The essence of this product lies in its ability to provide stable voltage output for various electronic applications.

Packaging/Quantity

It is typically packaged in reels of 1000 units.

Specifications

  • Input Voltage Range: 12V - 24V
  • Output Voltage: 10.0V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Stable output voltage
  • Small form factor
  • Wide input voltage range
  • Built-in protection features

Disadvantages

  • Limited maximum output current
  • Sensitive to voltage spikes

Working Principles

The IALNK1-1REG4-62-10.0-A uses a feedback mechanism to adjust the output voltage based on the input and maintain a stable voltage level.

Detailed Application Field Plans

This voltage regulator is commonly used in: - Automotive electronics - Portable electronic devices - Industrial control systems

Detailed and Complete Alternative Models

  • IALNK1-1REG4-62-9.0-A
  • IALNK1-1REG4-62-11.0-A
  • IALNK1-1REG4-62-12.0-A

This completes the entry for IALNK1-1REG4-62-10.0-A, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける IALNK1-1REG4-62-10.0-A の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of IALNK1-1REG4-62-10.0-A in technical solutions:

  1. What is IALNK1-1REG4-62-10.0-A?

    • IALNK1-1REG4-62-10.0-A is a specific model or type of component used in technical solutions, typically for a specific purpose such as signal conditioning or data acquisition.

  2. What are the key features of IALNK1-1REG4-62-10.0-A?

    • The key features may include high precision, multiple input channels, fast response time, compatibility with various interfaces, and robust construction for industrial environments.

  3. How is IALNK1-1REG4-62-10.0-A typically used in technical solutions?

    • IALNK1-1REG4-62-10.0-A is commonly used for signal amplification, filtering, isolation, and conversion in applications such as industrial automation, process control, and test and measurement systems.

  4. What are the recommended operating conditions for IALNK1-1REG4-62-10.0-A?

    • The recommended operating conditions may include voltage and current ranges, temperature limits, and environmental considerations to ensure optimal performance and longevity.

  5. What are the typical connection options for IALNK1-1REG4-62-10.0-A?

    • Typical connection options may include terminal blocks, connectors, or communication interfaces such as Modbus, Profibus, or Ethernet for integration into larger control or monitoring systems.

  6. Are there any special considerations for integrating IALNK1-1REG4-62-10.0-A into existing systems?

    • Special considerations may include compatibility with existing hardware and software, electrical noise immunity, and calibration requirements for accurate measurements.

  7. What are the potential benefits of using IALNK1-1REG4-62-10.0-A in technical solutions?

    • Potential benefits may include improved accuracy, reliability, and efficiency in data acquisition, control, and monitoring processes, leading to better overall system performance.

  8. What are some common troubleshooting tips for IALNK1-1REG4-62-10.0-A?

    • Common troubleshooting tips may involve checking power supply connections, verifying signal input/output integrity, and ensuring proper grounding and shielding to minimize interference.

  9. Are there any industry-specific standards or certifications relevant to IALNK1-1REG4-62-10.0-A?

    • Depending on the application, IALNK1-1REG4-62-10.0-A may need to comply with standards such as UL, CE, or specific industry regulations for safety and performance.

  10. Where can I find additional resources or support for IALNK1-1REG4-62-10.0-A?

    • Additional resources and support may be available from the manufacturer, including datasheets, application notes, technical support, and training materials to assist with the successful implementation of IALNK1-1REG4-62-10.0-A in technical solutions.