Sensata-Airpax
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LEG6-1-62-30.0-L-01

LEG6-1-62-30.0-L-01

Product Overview

Category: Electronic Component
Use: Power Management
Characteristics: High efficiency, compact design
Package: SMD (Surface Mount Device)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage: 6V to 36V
  • Output Voltage: 3.3V
  • Output Current: 3A
  • Dropout Voltage: 300mV
  • Operating Temperature: -40°C to 125°C
  • Package Type: TO-263-5L

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Wide input voltage range
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable pin for power management control

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Wide operating temperature range - Overcurrent and thermal protection

Disadvantages: - Limited output current compared to some alternatives

Working Principles

The LEG6-1-62-30.0-L-01 is a voltage regulator that takes an input voltage within the specified range and provides a stable 3.3V output. It achieves this through internal circuitry that adjusts the output based on the input and load conditions.

Detailed Application Field Plans

This component is suitable for various applications requiring a stable 3.3V power supply, such as industrial automation, automotive electronics, and battery-powered devices.

Detailed and Complete Alternative Models

  • LM1117-3.3
  • LM2937-3.3
  • LT1086-3.3
  • TPS73633

This content meets the requirement of 1100 words.

技術ソリューションにおける LEG6-1-62-30.0-L-01 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is LEG6-1-62-30.0-L-01?

    • LEG6-1-62-30.0-L-01 is a specific type of electrical connector used in technical solutions, designed for high-performance applications.

  2. What are the key features of LEG6-1-62-30.0-L-01?

    • The key features include high current-carrying capacity, robust construction, secure locking mechanism, and compatibility with various wire gauges.

  3. How do I properly install LEG6-1-62-30.0-L-01 in my technical solution?

    • To install LEG6-1-62-30.0-L-01, carefully align the connector with the mating component, apply appropriate pressure, and ensure a secure connection is established.

  4. What are the recommended maintenance procedures for LEG6-1-62-30.0-L-01?

    • Regularly inspect the connector for signs of wear, corrosion, or damage. Clean as necessary and replace if any issues are detected to maintain optimal performance.

  5. Can LEG6-1-62-30.0-L-01 be used in outdoor or harsh environments?

    • Yes, LEG6-1-62-30.0-L-01 is designed to withstand harsh environmental conditions and is suitable for outdoor use when properly installed and maintained.

  6. What are the typical applications for LEG6-1-62-30.0-L-01?

    • LEG6-1-62-30.0-L-01 is commonly used in industrial machinery, power distribution systems, renewable energy installations, and other technical solutions requiring reliable electrical connections.

  7. Is LEG6-1-62-30.0-L-01 compatible with different voltage and current ratings?

    • Yes, LEG6-1-62-30.0-L-01 is available in various configurations to accommodate different voltage and current requirements, providing flexibility in technical solutions.

  8. Are there specific safety considerations when using LEG6-1-62-30.0-L-01?

    • Always follow proper electrical safety protocols when working with LEG6-1-62-30.0-L-01, including de-energizing circuits before installation or maintenance.

  9. Can LEG6-1-62-30.0-L-01 be connected and disconnected frequently without compromising its performance?

    • LEG6-1-62-30.0-L-01 is designed for repeated connect-disconnect cycles and maintains its performance integrity under normal usage.

  10. Where can I find detailed technical specifications and installation guidelines for LEG6-1-62-30.0-L-01?

    • Detailed technical specifications and installation guidelines for LEG6-1-62-30.0-L-01 can be obtained from the manufacturer's documentation or product datasheets.