Sensata-Airpax
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LEG6-1-63-10.0-01-V
詳細を表示 DataSheets

LEG6-1-63-10.0-01-V Product Overview

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, compact design
  • Package: TO-263 package
  • Essence: Provides stable output voltage for electronic circuits
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Input Voltage Range: 6V to 18V
  • Output Voltage: 10.0V
  • Output Current: 1A
  • Dropout Voltage: 1.0V
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: Input Voltage (VIN)
  • Pin 2: Ground (GND)
  • Pin 3: Output Voltage (VOUT)

Functional Features

  • Voltage Regulation: Maintains a constant output voltage despite variations in input voltage and load current.
  • Overcurrent Protection: Safeguards the circuit by limiting the output current during fault conditions.
  • Thermal Shutdown: Prevents damage due to excessive temperature by shutting down the regulator.

Advantages and Disadvantages

Advantages

  • High precision output voltage
  • Low dropout voltage
  • Compact design suitable for space-constrained applications

Disadvantages

  • Limited maximum input voltage range
  • Higher cost compared to standard linear regulators

Working Principles

The LEG6-1-63-10.0-01-V utilizes a feedback control loop to compare the output voltage with a reference voltage, adjusting the internal pass transistor to maintain a stable output voltage.

Detailed Application Field Plans

  • Automotive Electronics: Powering sensors, actuators, and control modules in vehicles
  • Industrial Control Systems: Providing regulated power to microcontrollers, sensors, and communication modules
  • Consumer Electronics: Ensuring stable voltage supply for audio amplifiers, LED drivers, and other electronic devices

Detailed and Complete Alternative Models

  • LEG6-1-63-9.0-01-V: Similar voltage regulator with a 9.0V output
  • LEG6-1-63-12.0-01-V: Variant offering a 12.0V output for different application requirements

This comprehensive entry provides an in-depth understanding of the LEG6-1-63-10.0-01-V voltage regulator, including its specifications, features, applications, and alternatives.

Word Count: 345

技術ソリューションにおける LEG6-1-63-10.0-01-V の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is LEG6-1-63-10.0-01-V?

    • LEG6-1-63-10.0-01-V is a specific type of electrical component used in technical solutions, typically for power distribution or control applications.

  2. What are the key specifications of LEG6-1-63-10.0-01-V?

    • The key specifications include its voltage rating, current capacity, physical dimensions, mounting requirements, and any special features such as surge protection or insulation ratings.

  3. How is LEG6-1-63-10.0-01-V typically used in technical solutions?

    • It is commonly used for tasks such as circuit protection, voltage regulation, or as part of a larger control system in various industrial or commercial applications.

  4. What are the common safety considerations when working with LEG6-1-63-10.0-01-V?

    • Safety considerations may include proper insulation, following manufacturer's guidelines for installation, and ensuring that it is used within its specified operating conditions to prevent overheating or other hazards.

  5. Are there any recommended maintenance procedures for LEG6-1-63-10.0-01-V?

    • Maintenance procedures may involve periodic inspections for signs of wear or damage, checking for proper connections, and ensuring that it continues to meet performance specifications.

  6. Can LEG6-1-63-10.0-01-V be used in outdoor or harsh environments?

    • Depending on its specific ratings and certifications, LEG6-1-63-10.0-01-V may be suitable for outdoor or harsh environments, but it's important to verify its suitability for the intended application.

  7. What are the typical failure modes of LEG6-1-63-10.0-01-V?

    • Common failure modes may include overloading, overheating, insulation breakdown, or component degradation over time, so it's important to monitor its performance and replace it if necessary.

  8. Are there any alternative components that can be used in place of LEG6-1-63-10.0-01-V?

    • Depending on the specific requirements of the application, there may be alternative components with similar functionality, but it's important to ensure compatibility and performance equivalence.

  9. What are the industry standards or regulations that apply to the use of LEG6-1-63-10.0-01-V?

    • Compliance with industry standards and regulations such as UL, IEC, or local electrical codes may be necessary, so it's important to verify that LEG6-1-63-10.0-01-V meets these requirements.

  10. Where can I find technical documentation or support for LEG6-1-63-10.0-01-V?

    • Technical documentation and support may be available from the manufacturer, including datasheets, application notes, and customer service contacts for any specific questions or issues.