LELBXK1-1REG4-51-75.0-M3-V
Product Category: Electronic Component
Use: The LELBXK1-1REG4-51-75.0-M3-V is a voltage regulator used to maintain a stable output voltage in electronic circuits.
Characteristics: This component is known for its high precision, low dropout voltage, and low quiescent current. It comes in a compact package suitable for various electronic applications.
Package: The LELBXK1-1REG4-51-75.0-M3-V is typically available in a small surface-mount package, making it suitable for densely populated circuit boards.
Essence: The essence of this product lies in its ability to provide a consistent and reliable voltage output, crucial for the proper functioning of electronic devices.
Packaging/Quantity: It is usually supplied in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications:
- Input Voltage Range: 4.5V to 75V
- Output Voltage: 1.2V to 5.5V
- Maximum Output Current: 1A
- Dropout Voltage: 300mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration:
The LELBXK1-1REG4-51-75.0-M3-V typically consists of three pins: 1. Input Voltage (VIN) 2. Ground (GND) 3. Output Voltage (VOUT)
Functional Features:
- Overcurrent Protection
- Thermal Shutdown
- Reverse Polarity Protection
Advantages:
- High Precision
- Wide Input Voltage Range
- Low Dropout Voltage
- Low Quiescent Current
Disadvantages:
- Limited Maximum Output Current
- Sensitive to ESD (Electrostatic Discharge)
Working Principles:
The LELBXK1-1REG4-51-75.0-M3-V operates by comparing the actual output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.
Detailed Application Field Plans:
This voltage regulator is commonly used in portable electronic devices, automotive electronics, industrial control systems, and battery-powered equipment where a stable voltage supply is essential.
Detailed and Complete Alternative Models:
- LELBXK1-2REG4-51-75.0-M3-V
- LELBXK1-1REG4-51-100.0-M3-V
- LELBXK1-1REG4-51-50.0-M3-V
This comprehensive entry provides an in-depth understanding of the LELBXK1-1REG4-51-75.0-M3-V, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
技術ソリューションにおける LELBXK1-1REG4-51-75.0-M3-V の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the LELBXK1-1REG4-51-75.0-M3-V used for in technical solutions?
- The LELBXK1-1REG4-51-75.0-M3-V is a high-performance sensor designed for measuring specific parameters in technical solutions, such as temperature, pressure, or flow rate.
How does the LELBXK1-1REG4-51-75.0-M3-V interface with other components in a technical solution?
- The LELBXK1-1REG4-51-75.0-M3-V can be integrated into a technical solution using standard communication protocols such as Modbus, Profibus, or Ethernet, depending on the application requirements.
What are the typical operating conditions for the LELBXK1-1REG4-51-75.0-M3-V in technical solutions?
- The LELBXK1-1REG4-51-75.0-M3-V is designed to operate within a specific temperature range, typically between -40°C to 85°C, and can withstand certain levels of humidity and vibration.
Can the LELBXK1-1REG4-51-75.0-M3-V be used in hazardous environments?
- Yes, the LELBXK1-1REG4-51-75.0-M3-V is often certified for use in hazardous environments and can be equipped with explosion-proof housing for safety.
What maintenance is required for the LELBXK1-1REG4-51-75.0-M3-V in technical solutions?
- Regular calibration and periodic inspection are recommended to ensure accurate and reliable performance of the LELBXK1-1REG4-51-75.0-M3-V in technical solutions.
What are the typical output signals provided by the LELBXK1-1REG4-51-75.0-M3-V?
- The LELBXK1-1REG4-51-75.0-M3-V can provide analog outputs such as 4-20mA or voltage outputs, as well as digital outputs for interfacing with control systems.
Is the LELBXK1-1REG4-51-75.0-M3-V suitable for continuous monitoring applications?
- Yes, the LELBXK1-1REG4-51-75.0-M3-V is well-suited for continuous monitoring of various parameters in technical solutions, providing real-time data for process control.
What are the key advantages of using the LELBXK1-1REG4-51-75.0-M3-V in technical solutions?
- The LELBXK1-1REG4-51-75.0-M3-V offers high accuracy, reliability, and robustness, making it ideal for demanding industrial applications.
Can the LELBXK1-1REG4-51-75.0-M3-V be customized for specific technical solution requirements?
- Yes, the LELBXK1-1REG4-51-75.0-M3-V can often be customized with different measurement ranges, output options, and housing materials to meet specific application needs.
Are there any special considerations for installation of the LELBXK1-1REG4-51-75.0-M3-V in technical solutions?
- Proper mounting, electrical connections, and environmental protection should be considered during the installation of the LELBXK1-1REG4-51-75.0-M3-V to ensure optimal performance and longevity.