EFM32GG11B110F2048GM64-B

Product Overview

• Category: Microcontroller
• Use: Embedded systems, Internet of Things (IoT) devices, and other applications requiring high-performance processing and low power consumption.
• Characteristics: High-performance ARM Cortex-M4 processor, low energy consumption, extensive peripheral set, large memory capacity, and advanced security features.
• Package: 64-pin QFN package
• Essence: The EFM32GG11B110F2048GM64-B is a microcontroller designed for demanding applications that require both high performance and low power consumption.
• Packaging/Quantity: Available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

• Processor: ARM Cortex-M4 running at up to 72 MHz
• Memory: 2 MB Flash, 256 KB RAM
• Peripherals: USB, UART, SPI, I2C, GPIO, ADC, DAC, Timers, etc.
• Operating Voltage: 1.62V - 3.8V
• Operating Temperature: -40°C to +85°C
• Power Consumption: Active mode: 80 μA/MHz, Deep Sleep mode: 1.5 μA, Shut-off mode: 20 nA

Detailed Pin Configuration

The EFM32GG11B110F2048GM64-B microcontroller has a total of 64 pins. The pin configuration is as follows:

• Pin 1: VDD
• Pin 2: VSS
• Pin 3: PA0
• Pin 4: PA1
• ...
• Pin 63: PC14
• Pin 64: PC15

For a complete pinout diagram, please refer to the datasheet.

Functional Features

• High-performance processing: The ARM Cortex-M4 processor provides efficient and powerful processing capabilities.
• Low power consumption: The microcontroller is designed to minimize energy usage, making it suitable for battery-powered applications.
• Extensive peripheral set: A wide range of built-in peripherals allows for versatile connectivity and functionality.
• Large memory capacity: Ample Flash and RAM memory enable the storage and execution of complex applications.
• Advanced security features: The microcontroller includes hardware encryption and secure boot capabilities to protect sensitive data.

Advantages and Disadvantages

Advantages: - High-performance processing capability - Low power consumption - Extensive peripheral set - Advanced security features

Disadvantages: - Relatively higher cost compared to lower-end microcontrollers - Requires some level of expertise to fully utilize its capabilities

Working Principles

The EFM32GG11B110F2048GM64-B microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in its memory to perform various tasks, communicate with external devices through its peripherals, and process data according to the programmed algorithms.

Detailed Application Field Plans

The EFM32GG11B110F2048GM64-B microcontroller finds applications in various fields, including but not limited to:

1. Internet of Things (IoT) devices: Its low power consumption and extensive peripheral set make it suitable for IoT applications such as smart home devices, environmental monitoring systems, and wearable technology.
2. Industrial automation: The microcontroller's high-performance processing capabilities and advanced security features make it ideal for industrial control systems, robotics, and machine-to-machine communication.
3. Automotive electronics: With its large memory capacity and versatile connectivity options, the microcontroller can be used in automotive applications like infotainment systems, engine control units, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

1. EFM32GG11B120F2048GM64-B: Similar to the EFM32GG11B110F2048GM64-B, but with 120 pins instead of 64.
2. EFM32GG11B110F512GM64-B: Offers the same features as the EFM32GG11B110F2048GM64-B, but with 512 KB RAM instead of 256 KB.

These alternative models provide options with different pin counts and memory capacities to suit specific application requirements.

Note: The content provided above is a sample structure for an encyclopedia entry and may not reflect actual specifications or details of the mentioned product.