画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
EFM32HG110F64G-A-QFN24R

EFM32HG110F64G-A-QFN24R

Product Overview

Category

The EFM32HG110F64G-A-QFN24R belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications that require low power consumption and high performance.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Integrated peripherals
  • Rich set of features

Package

The EFM32HG110F64G-A-QFN24R comes in a QFN24 package, which stands for Quad Flat No-Lead with 24 pins.

Essence

The essence of this microcontroller lies in its ability to provide efficient processing capabilities while consuming minimal power.

Packaging/Quantity

The EFM32HG110F64G-A-QFN24R is typically packaged in reels or trays, and the quantity per package depends on the manufacturer's specifications.

Specifications

  • Microcontroller core: ARM Cortex-M0+
  • Flash memory: 64 KB
  • RAM: 8 KB
  • Operating voltage: 1.8V - 3.8V
  • Maximum clock frequency: 25 MHz
  • Number of I/O pins: 24
  • Communication interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 12-bit, 8 channels
  • Timers: General Purpose Timer, Real-Time Counter (RTC)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of the EFM32HG110F64G-A-QFN24R microcontroller is as follows:

  1. Pin 1: VDD - Power supply voltage
  2. Pin 2: PA0 - General-purpose I/O pin
  3. Pin 3: PA1 - General-purpose I/O pin
  4. Pin 4: PA2 - General-purpose I/O pin
  5. Pin 5: PA3 - General-purpose I/O pin
  6. Pin 6: PA4 - General-purpose I/O pin
  7. Pin 7: PA5 - General-purpose I/O pin
  8. Pin 8: PA6 - General-purpose I/O pin
  9. Pin 9: PA7 - General-purpose I/O pin
  10. Pin 10: GND - Ground

Note: The remaining pins follow a similar pattern.

Functional Features

The EFM32HG110F64G-A-QFN24R microcontroller offers the following functional features:

  1. Low power modes for energy-efficient operation.
  2. Integrated peripherals such as UART, SPI, and I2C for communication purposes.
  3. Analog-to-Digital Converter (ADC) for precise analog signal measurements.
  4. Timers for accurate timing and event management.
  5. Real-Time Counter (RTC) for timekeeping applications.
  6. GPIO pins for general-purpose input/output operations.
  7. Built-in security features to protect sensitive data.

Advantages and Disadvantages

Advantages

  • Low power consumption enables longer battery life in portable devices.
  • High-performance ARM Cortex-M0+ core allows for efficient processing.
  • Integrated peripherals simplify system design and reduce external component count.
  • Small form factor makes it suitable for space-constrained applications.
  • Rich set of features provides flexibility for various embedded applications.

Disadvantages

  • Limited flash memory and RAM capacity may restrict the complexity of applications.
  • Availability and pricing may vary depending on the manufacturer and market demand.

Working Principles

The EFM32HG110F64G-A-QFN24R microcontroller operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its flash memory, interacts with peripherals, and communicates with external devices to perform specific tasks. The ARM Cortex-M0+ core provides the processing power, while the integrated peripherals enable various functionalities.

Detailed Application Field Plans

The EFM32HG110F64G-A-QFN24R microcontroller is suitable for a wide range of applications, including but not limited to:

  1. Internet of Things (IoT) devices
  2. Home automation systems
  3. Wearable devices
  4. Industrial control systems
  5. Sensor networks
  6. Medical devices
  7. Consumer electronics

Detailed and Complete Alternative Models

  1. EFM32HG110F64G-B-QFN24R: Similar to the EFM32HG110F64G-A-QFN24R, but with additional features.
  2. EFM32HG110F128G-A-QFN24R: Higher flash memory capacity variant of the same microcontroller.
  3. EFM32HG310F64G-A-QFN24R: A similar microcontroller with enhanced performance capabilities.

These alternative models offer different specifications and features to cater to specific application requirements.

In conclusion, the EFM32HG110F64G-A

技術ソリューションにおける EFM32HG110F64G-A-QFN24R の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of EFM32HG110F64G-A-QFN24R in technical solutions:

  1. Q: What is the EFM32HG110F64G-A-QFN24R microcontroller used for? A: The EFM32HG110F64G-A-QFN24R is a microcontroller designed for low-power applications, such as battery-powered devices, IoT sensors, and wearables.

  2. Q: What is the maximum clock frequency of the EFM32HG110F64G-A-QFN24R? A: The EFM32HG110F64G-A-QFN24R can operate at a maximum clock frequency of 25 MHz.

  3. Q: How much flash memory does the EFM32HG110F64G-A-QFN24R have? A: The EFM32HG110F64G-A-QFN24R has 64 KB of flash memory for program storage.

  4. Q: Can I use the EFM32HG110F64G-A-QFN24R for analog sensor interfacing? A: Yes, the EFM32HG110F64G-A-QFN24R has built-in analog-to-digital converters (ADCs) that can be used for interfacing with analog sensors.

  5. Q: Does the EFM32HG110F64G-A-QFN24R support communication protocols like UART, SPI, and I2C? A: Yes, the EFM32HG110F64G-A-QFN24R supports UART, SPI, and I2C communication interfaces.

  6. Q: What is the operating voltage range of the EFM32HG110F64G-A-QFN24R? A: The EFM32HG110F64G-A-QFN24R operates in the voltage range of 1.8V to 3.8V.

  7. Q: Can I use the EFM32HG110F64G-A-QFN24R for low-power applications? A: Yes, the EFM32HG110F64G-A-QFN24R is designed for low-power applications and has various power-saving features.

  8. Q: Does the EFM32HG110F64G-A-QFN24R have any built-in security features? A: Yes, the EFM32HG110F64G-A-QFN24R includes hardware encryption and a unique device identifier (UDID) for enhanced security.

  9. Q: What development tools are available for programming the EFM32HG110F64G-A-QFN24R? A: Silicon Labs provides a software development kit (SDK) and an integrated development environment (IDE) called Simplicity Studio for programming the EFM32HG110F64G-A-QFN24R.

  10. Q: Can I use the EFM32HG110F64G-A-QFN24R in industrial applications? A: Yes, the EFM32HG110F64G-A-QFN24R is suitable for various industrial applications due to its low-power consumption and robust design.

Please note that these answers are general and may vary depending on specific requirements and application scenarios.