Silicon Labs
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
EFM32TG110F8-QFN24
詳細を表示 DataSheets

EFM32TG110F8-QFN24

Introduction

The EFM32TG110F8-QFN24 is a microcontroller belonging to the EFM32TG110 series, designed and manufactured by Silicon Labs. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, and low-power applications
  • Characteristics: Ultra-low power consumption, high performance, and integrated peripherals
  • Package: QFN24
  • Essence: Energy-friendly microcontroller
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Core: ARM Cortex-M3
  • Clock Speed: Up to 32 MHz
  • Flash Memory: 8 KB
  • RAM: 2 KB
  • Operating Voltage: 1.85V to 3.8V
  • I/O Pins: 24
  • Communication Interfaces: USART, I2C, SPI
  • Analog-to-Digital Converter (ADC): 12-bit, 8 channels
  • Timers: General Purpose Timers, Low Energy Timer (LETIMER)

Detailed Pin Configuration

The EFM32TG110F8-QFN24 features 24 pins, including GPIO, communication interface pins, power supply pins, and other essential pins. The detailed pin configuration can be found in the official datasheet provided by Silicon Labs.

Functional Features

  • Ultra-Low Power Modes: Enables energy-efficient operation for battery-powered applications.
  • Peripheral Reflex System (PRS): Allows autonomous interaction between peripherals, reducing CPU intervention.
  • Low Energy Sensor Interface (LESENSE): Provides a low-power capacitive touch and proximity sensing solution.
  • Energy Management Unit (EMU): Optimizes energy usage and extends battery life.

Advantages and Disadvantages

Advantages

  • Exceptional energy efficiency
  • Rich set of integrated peripherals
  • Extensive development tools and software support

Disadvantages

  • Limited on-chip memory for certain applications
  • Relatively higher cost compared to some competing microcontrollers

Working Principles

The EFM32TG110F8-QFN24 operates based on the ARM Cortex-M3 core architecture, utilizing low-power modes and integrated peripherals to efficiently execute tasks while minimizing energy consumption. It employs a combination of hardware and software techniques to achieve optimal performance in energy-constrained applications.

Detailed Application Field Plans

The EFM32TG110F8-QFN24 is well-suited for various applications, including: - Battery-powered IoT devices - Wearable electronics - Home automation systems - Industrial control systems - Portable healthcare devices

Detailed and Complete Alternative Models

  • EFM32TG210F32-QFN32
  • EFM32TG840F32-QFN32
  • EFM32TG222F32-QFN32
  • EFM32TG110F32-QFN32

In conclusion, the EFM32TG110F8-QFN24 microcontroller from Silicon Labs offers exceptional energy efficiency and a rich set of integrated peripherals, making it an ideal choice for low-power embedded applications across diverse industries.

(Word count: 529)

技術ソリューションにおける EFM32TG110F8-QFN24 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the EFM32TG110F8-QFN24 microcontroller used for?

    • The EFM32TG110F8-QFN24 microcontroller is commonly used in low-power, energy-efficient embedded systems such as IoT devices, wearables, and battery-powered applications.

  2. What are the key features of the EFM32TG110F8-QFN24?

    • The key features of the EFM32TG110F8-QFN24 include a 32-bit ARM Cortex-M3 processor, low power consumption, multiple communication interfaces, and a wide operating voltage range.

  3. How can I program the EFM32TG110F8-QFN24 microcontroller?

    • The EFM32TG110F8-QFN24 microcontroller can be programmed using the Silicon Labs Simplicity Studio IDE or other compatible development environments.

  4. What are the available communication interfaces on the EFM32TG110F8-QFN24?

    • The EFM32TG110F8-QFN24 microcontroller supports various communication interfaces including UART, SPI, I2C, and USB.

  5. Can the EFM32TG110F8-QFN24 operate on battery power?

    • Yes, the EFM32TG110F8-QFN24 is designed to operate efficiently on battery power, making it suitable for portable and low-power applications.

  6. Does the EFM32TG110F8-QFN24 support real-time operating systems (RTOS)?

    • Yes, the EFM32TG110F8-QFN24 is compatible with popular RTOS such as FreeRTOS, making it suitable for multitasking and real-time applications.

  7. What tools are available for debugging and testing applications on the EFM32TG110F8-QFN24?

    • Silicon Labs provides a range of debugging tools and software, including the Energy Profiler and Advanced Energy Monitoring, to help developers optimize power consumption and performance.

  8. Is the EFM32TG110F8-QFN24 suitable for industrial automation applications?

    • Yes, the EFM32TG110F8-QFN24's robust design and low power consumption make it well-suited for industrial automation and control systems.

  9. What are the temperature specifications for the EFM32TG110F8-QFN24?

    • The EFM32TG110F8-QFN24 has an extended temperature range, typically from -40°C to 85°C, making it suitable for both commercial and industrial environments.

  10. Are there any known limitations or common issues when using the EFM32TG110F8-QFN24?

    • While the EFM32TG110F8-QFN24 is a reliable microcontroller, developers should be aware of potential issues related to clock configuration, power management, and peripheral interactions when designing their applications. Always refer to the official documentation and errata for the most up-to-date information.