STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LD1086V
詳細を表示 DataSheets

LD1086V

Product Overview

  • Category: Voltage Regulator
  • Use: LD1086V is a low-dropout voltage regulator designed to provide a regulated output voltage even when the input voltage is very close to the desired output voltage.
  • Characteristics: LD1086V has a low dropout voltage, high output current capability, and excellent line and load regulation. It is suitable for various applications where a stable voltage supply is required.
  • Package: LD1086V is available in a TO-220 package, which provides good thermal conductivity and easy mounting on a heat sink.
  • Essence: The essence of LD1086V lies in its ability to maintain a constant output voltage despite variations in the input voltage.
  • Packaging/Quantity: LD1086V is typically sold in reels or tubes containing a specific quantity of units.

Specifications

  • Input Voltage Range: 2.5V to 20V
  • Output Voltage Range: 1.25V to 18V
  • Dropout Voltage: 1.3V (typical)
  • Output Current: Up to 1.5A
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

LD1086V has three pins:

  1. Input Pin (VIN): This pin is used to connect the input voltage source.
  2. Output Pin (VOUT): This pin provides the regulated output voltage.
  3. Ground Pin (GND): This pin is connected to the ground reference.

Functional Features

  • Low dropout voltage ensures stable output voltage even with small input-output voltage differentials.
  • High output current capability allows LD1086V to power a wide range of loads.
  • Excellent line and load regulation provide a stable output voltage under varying conditions.
  • Built-in thermal shutdown protection prevents the device from overheating.

Advantages and Disadvantages

Advantages: - Low dropout voltage enables efficient power conversion. - High output current capability suits various applications. - Good line and load regulation ensure stable voltage supply. - Thermal shutdown protection enhances device reliability.

Disadvantages: - Limited input voltage range (2.5V to 20V). - Dropout voltage may cause power dissipation in certain scenarios.

Working Principles

LD1086V operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output pins. The internal circuitry compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a constant output voltage.

Detailed Application Field Plans

LD1086V finds applications in various fields, including but not limited to: 1. Power supplies for microcontrollers and other digital ICs. 2. Battery-powered devices requiring stable voltage supply. 3. Automotive electronics. 4. Industrial control systems. 5. Audio amplifiers and preamplifiers. 6. LED lighting systems.

Detailed and Complete Alternative Models

Some alternative models to LD1086V that offer similar functionality are: 1. LM317: A popular adjustable voltage regulator with a wide input voltage range. 2. LT1086: A low dropout positive fixed voltage regulator with high accuracy. 3. ADP3339: A low dropout linear regulator with ultra-low quiescent current. 4. MAX603: A precision low dropout voltage reference.

These alternative models can be considered based on specific requirements and application needs.

Word count: 411 words

技術ソリューションにおける LD1086V の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LD1086V in technical solutions:

  1. Q: What is LD1086V? A: LD1086V is a low-dropout voltage regulator IC commonly used in electronic circuits to provide stable and regulated power supply.

  2. Q: What is the input voltage range for LD1086V? A: The input voltage range for LD1086V typically varies from 4.5V to 20V.

  3. Q: What is the output voltage range of LD1086V? A: The output voltage range of LD1086V can be adjusted using external resistors, but it typically ranges from 1.25V to 15V.

  4. Q: What is the maximum output current of LD1086V? A: The maximum output current of LD1086V depends on the specific variant, but it can typically handle currents up to 1.5A.

  5. Q: Can LD1086V handle both positive and negative voltages? A: No, LD1086V is designed to regulate positive voltages only. It cannot handle negative voltages.

  6. Q: Is LD1086V suitable for battery-powered applications? A: Yes, LD1086V is often used in battery-powered applications due to its low dropout voltage and low quiescent current.

  7. Q: Does LD1086V require any external components for operation? A: Yes, LD1086V requires input and output capacitors for stability and proper operation. The values of these capacitors depend on the application requirements.

  8. Q: Can LD1086V handle high temperatures? A: LD1086V has a wide operating temperature range, typically from -40°C to 125°C, making it suitable for various temperature environments.

  9. Q: Can LD1086V be used in automotive applications? A: Yes, LD1086V is often used in automotive applications due to its robustness and ability to handle voltage fluctuations.

  10. Q: Are there any specific precautions to consider when using LD1086V? A: It is important to ensure proper heat dissipation by using an appropriate heatsink if the power dissipation exceeds the specified limits. Additionally, attention should be given to input and output voltage ratings to prevent damage to the IC.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of LD1086V.