STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LD1086V12
詳細を表示 DataSheets

LD1086V12

Product Overview

Category

LD1086V12 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • LD1086V12 has a low dropout voltage, making it suitable for applications with tight voltage requirements.
  • It offers high output voltage accuracy and low output voltage noise.
  • The device operates within a wide input voltage range.
  • LD1086V12 exhibits excellent line and load regulation characteristics.
  • It is designed to be thermally efficient, allowing for extended operation without overheating.

Package

The LD1086V12 comes in a compact TO-220 package, which provides good thermal dissipation properties.

Essence

The essence of LD1086V12 lies in its ability to provide stable and regulated voltage output, ensuring reliable performance of electronic devices.

Packaging/Quantity

LD1086V12 is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V - 26V
  • Output Voltage: 12V
  • Dropout Voltage: 1.2V (typical)
  • Output Current: Up to 1.5A
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LD1086V12 features three pins:

  1. Vin (Pin 1): Input voltage pin.
  2. Vout (Pin 2): Output voltage pin.
  3. GND (Pin 3): Ground pin.

Functional Features

  • LD1086V12 provides a fixed 12V output voltage, ensuring stability in various applications.
  • It offers protection against overcurrent and thermal overload, enhancing system reliability.
  • The device exhibits low quiescent current, minimizing power consumption in standby mode.
  • LD1086V12 has a fast transient response, making it suitable for applications with dynamic load changes.

Advantages and Disadvantages

Advantages

  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • Excellent line and load regulation characteristics guarantee stable performance across varying conditions.
  • Thermal efficiency allows for prolonged operation without overheating.
  • Protection features enhance system reliability.

Disadvantages

  • Limited output current capacity may restrict its use in high-power applications.
  • Fixed output voltage may not be suitable for applications requiring adjustable voltage levels.

Working Principles

LD1086V12 operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This mechanism ensures that the output voltage remains constant despite variations in the input voltage or load conditions.

Detailed Application Field Plans

LD1086V12 finds application in various electronic systems, including but not limited to: - Power supplies for microcontrollers and other digital ICs. - Battery charging circuits. - Automotive electronics. - Industrial control systems. - Audio amplifiers.

Detailed and Complete Alternative Models

  1. LM317: A versatile adjustable voltage regulator capable of providing a wide range of output voltages.
  2. LT1086: Similar to LD1086V12, but with adjustable output voltage capability.
  3. LM7805: A fixed 5V voltage regulator commonly used in low-power applications.

These alternative models offer similar functionality to LD1086V12 but may have different specifications and pin configurations.

Word count: 498 words

技術ソリューションにおける LD1086V12 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LD1086V12 in technical solutions:

  1. Q: What is LD1086V12? A: LD1086V12 is a voltage regulator IC (integrated circuit) commonly used in electronic circuits to regulate and stabilize voltage levels.

  2. Q: What is the input voltage range for LD1086V12? A: The input voltage range for LD1086V12 is typically between 4.5V and 26V.

  3. Q: What is the output voltage range of LD1086V12? A: The output voltage range of LD1086V12 can be adjusted from 1.25V to 12V using external resistors.

  4. Q: What is the maximum output current of LD1086V12? A: The maximum output current of LD1086V12 is 1.5A, which means it can supply up to 1.5 Amps of current to the load.

  5. Q: Is LD1086V12 suitable for both linear and switching power supply applications? A: No, LD1086V12 is specifically designed for linear power supply applications.

  6. Q: Can LD1086V12 handle high temperatures? A: Yes, LD1086V12 has a wide operating temperature range of -40°C to +125°C, making it suitable for various environments.

  7. Q: Does LD1086V12 require any external components for operation? A: Yes, LD1086V12 requires a few external components such as input and output capacitors, and resistors to set the desired output voltage.

  8. Q: Can LD1086V12 protect against overcurrent or short-circuit conditions? A: No, LD1086V12 does not have built-in protection against overcurrent or short-circuit conditions. Additional external circuitry may be required for such protection.

  9. Q: Can LD1086V12 be used in battery-powered applications? A: Yes, LD1086V12 can be used in battery-powered applications as it has low dropout voltage and low quiescent current, making it suitable for conserving battery power.

  10. Q: Is LD1086V12 available in different package options? A: Yes, LD1086V12 is available in various package options, including TO-220, TO-263, and SOT-223, providing flexibility for different PCB layouts and thermal requirements.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.