STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LD1086V36
詳細を表示 DataSheets

LD1086V36

Product Overview

The LD1086V36 belongs to the category of voltage regulators and is commonly used to provide a stable output voltage for various electronic devices. Its characteristics include high precision, low dropout voltage, and thermal shutdown protection. The package typically consists of a TO-220 or DPAK, and it is available in quantities suitable for both individual and industrial use.

Specifications

  • Output Voltage: 3.6V
  • Maximum Input Voltage: 15V
  • Dropout Voltage: 1.2V
  • Maximum Output Current: 1.5A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LD1086V36 has three pins: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)

Functional Features

  • High precision output voltage
  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages and Disadvantages

Advantages

  • Stable output voltage
  • Wide operating temperature range
  • Overcurrent protection

Disadvantages

  • Higher dropout voltage compared to some alternatives
  • Limited maximum output current

Working Principles

The LD1086V36 operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output. When the input voltage exceeds the required output voltage plus the dropout voltage, the regulator enters dropout mode, where the output voltage decreases with the input voltage.

Detailed Application Field Plans

The LD1086V36 is widely used in applications such as battery-powered devices, instrumentation, and automotive electronics. Its stable output voltage and thermal protection make it suitable for sensitive electronic components.

Detailed and Complete Alternative Models

Some alternative models to the LD1086V36 include the LM317, LM1117, and LT1086. These models offer similar functionality with slight variations in specifications and package types.

In conclusion, the LD1086V36 is a reliable voltage regulator with precise output voltage control and thermal protection, making it suitable for a wide range of electronic applications.

Word Count: 276

技術ソリューションにおける LD1086V36 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is LD1086V36?

    • LD1086V36 is a voltage regulator IC that can provide a fixed 3.6V output voltage.

  2. What is the input voltage range for LD1086V36?

    • The input voltage range for LD1086V36 is typically between 4.5V and 15V.

  3. What is the maximum output current of LD1086V36?

    • The maximum output current of LD1086V36 is 1.5A.

  4. What are the typical applications of LD1086V36?

    • LD1086V36 is commonly used in battery-powered devices, voltage regulators, and low dropout linear regulators.

  5. What is the dropout voltage of LD1086V36?

    • The dropout voltage of LD1086V36 is typically around 1.2V at full load.

  6. Is LD1086V36 suitable for automotive applications?

    • Yes, LD1086V36 is suitable for automotive applications as it can operate within the required temperature range and has built-in protection features.

  7. Can LD1086V36 be used in parallel to increase the output current?

    • Yes, LD1086V36 can be used in parallel to increase the output current by using external resistors for current sharing.

  8. What are the key features of LD1086V36?

    • The key features of LD1086V36 include thermal overload protection, short-circuit protection, and low dropout voltage.

  9. Does LD1086V36 require external capacitors for stability?

    • Yes, LD1086V36 requires external capacitors for stability and proper operation.

  10. What are the recommended operating conditions for LD1086V36?

    • The recommended operating conditions for LD1086V36 include a junction temperature range of -40°C to 125°C and a storage temperature range of -65°C to 150°C.