STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LD1117D18
詳細を表示 DataSheets

LD1117D18

Product Overview

Category

The LD1117D18 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • Output current up to 800 mA
  • Fixed output voltage of 1.8V
  • Thermal overload protection
  • Short-circuit current limit
  • Wide input voltage range

Package

The LD1117D18 comes in a TO-220 package, which is a widely used through-hole package for power semiconductors.

Essence

The essence of LD1117D18 lies in its ability to provide a stable and regulated output voltage of 1.8V, even when the input voltage varies.

Packaging/Quantity

The LD1117D18 is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.2V to 15V
  • Output Voltage: 1.8V
  • Output Current: Up to 800mA
  • Dropout Voltage: 1.2V (typical)
  • Line Regulation: 0.04% (typical)
  • Load Regulation: 0.1% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LD1117D18 has three pins:

  1. Vin (Input): This pin is connected to the input voltage source.
  2. Vout (Output): The regulated output voltage of 1.8V is obtained from this pin.
  3. GND (Ground): This pin is connected to the ground reference.

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • Thermal overload protection prevents damage due to excessive heat.
  • Short-circuit current limit protects the regulator and the connected circuitry from excessive current.
  • Wide input voltage range allows for flexibility in various applications.

Advantages

  • Stable and regulated output voltage of 1.8V.
  • Low dropout voltage minimizes power dissipation.
  • Thermal overload protection ensures reliability.
  • Short-circuit current limit protects the circuitry.
  • Wide input voltage range provides versatility.

Disadvantages

  • Limited output current of up to 800mA.
  • Dropout voltage of 1.2V may not be suitable for applications with tight voltage margins.

Working Principles

The LD1117D18 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the pass transistor accordingly to maintain a stable output voltage of 1.8V.

Detailed Application Field Plans

The LD1117D18 finds applications in various electronic devices, including but not limited to:

  1. Battery-powered devices: It can be used to regulate voltage in portable electronics such as smartphones, tablets, and digital cameras.
  2. Embedded systems: The LD1117D18 can provide a stable voltage supply for microcontrollers, sensors, and other components in embedded systems.
  3. Automotive electronics: It can be utilized in automotive applications to regulate voltage for various subsystems like infotainment systems, lighting, and control modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to LD1117D18 include:

  1. LM1117-1.8: Manufactured by Texas Instruments, it is a low dropout voltage regulator with a fixed output voltage of 1.8V.
  2. LT1117-1.8: Produced by Linear Technology, it is another low dropout voltage regulator with a fixed output voltage of 1.8V.
  3. MCP1701-1802E/TO: Manufactured by Microchip Technology, it is a low dropout voltage regulator with a fixed output voltage of 1.8V.

These alternative models can be considered based on specific requirements and availability.

Word count: 520 words

技術ソリューションにおける LD1117D18 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LD1117D18 in technical solutions:

  1. Q: What is LD1117D18? A: LD1117D18 is a low-dropout voltage regulator IC that provides a fixed output voltage of 1.8V.

  2. Q: What is the maximum input voltage for LD1117D18? A: The maximum input voltage for LD1117D18 is typically around 15V, but it can handle up to 20V in some cases.

  3. Q: What is the dropout voltage of LD1117D18? A: The dropout voltage of LD1117D18 is typically around 1.2V at full load.

  4. Q: Can LD1117D18 be used to regulate higher voltages? A: No, LD1117D18 is specifically designed to regulate lower voltages and cannot be used to regulate higher voltages.

  5. Q: What is the maximum output current of LD1117D18? A: The maximum output current of LD1117D18 is typically around 800mA, but it can vary depending on the specific model.

  6. Q: Is LD1117D18 suitable for battery-powered applications? A: Yes, LD1117D18 is commonly used in battery-powered applications due to its low dropout voltage and low quiescent current.

  7. Q: Does LD1117D18 require any external components for operation? A: Yes, LD1117D18 requires an input capacitor and an output capacitor for stable operation. The values of these capacitors depend on the application requirements.

  8. Q: Can LD1117D18 handle short-circuit conditions? A: Yes, LD1117D18 has built-in short-circuit protection, which helps to prevent damage in case of a short circuit.

  9. Q: Can LD1117D18 operate in high-temperature environments? A: Yes, LD1117D18 can operate in a wide temperature range, typically from -40°C to 125°C, making it suitable for various industrial applications.

  10. Q: Are there any alternatives to LD1117D18 for low-voltage regulation? A: Yes, there are other voltage regulator ICs available in the market that can provide similar functionality, such as LM1117 or LP2985.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.