STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ST7FLITEU09M6TR
詳細を表示 DataSheets

ST7FLITEU09M6TR

Product Overview

Category

The ST7FLITEU09M6TR belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications, including consumer electronics, industrial automation, and automotive systems.

Characteristics

  • Low power consumption
  • High-performance 8-bit CPU core
  • Flash memory for program storage
  • Integrated peripherals for enhanced functionality
  • Wide operating voltage range
  • Small form factor

Package

The ST7FLITEU09M6TR is available in a compact surface-mount package, making it suitable for space-constrained designs.

Essence

The essence of this microcontroller lies in its ability to provide a cost-effective solution for embedded systems that require low power consumption and high performance.

Packaging/Quantity

The ST7FLITEU09M6TR is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • CPU: 8-bit ST7 core
  • Operating Voltage Range: 2.4V to 5.5V
  • Flash Memory: 8KB
  • RAM: 256 bytes
  • Timers: 2x 16-bit timers, 1x watchdog timer
  • Communication Interfaces: SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ST7FLITEU09M6TR has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply
  2. PA0 - General-purpose I/O
  3. PA1 - General-purpose I/O
  4. PA2 - General-purpose I/O
  5. PA3 - General-purpose I/O
  6. PA4 - General-purpose I/O
  7. PA5 - General-purpose I/O
  8. PA6 - General-purpose I/O
  9. PA7 - General-purpose I/O
  10. RESET - Reset pin
  11. OSCIN - Oscillator input
  12. OSCOUT - Oscillator output
  13. VSS - Ground
  14. PB0 - General-purpose I/O
  15. PB1 - General-purpose I/O
  16. PB2 - General-purpose I/O
  17. PB3 - General-purpose I/O
  18. PB4 - General-purpose I/O
  19. PB5 - General-purpose I/O
  20. VDD - Power supply

Functional Features

  • Low power consumption in both active and standby modes
  • Enhanced peripheral set for increased functionality
  • Flexible clocking options for optimized performance
  • Built-in hardware and software debugging capabilities
  • Comprehensive interrupt handling mechanism
  • On-chip oscillator for accurate timing
  • Multiple communication interfaces for seamless connectivity

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable applications.
  • Compact form factor enables integration into space-constrained designs.
  • Wide operating voltage range allows compatibility with various power sources.
  • Enhanced peripherals provide additional functionality without external components.

Disadvantages

  • Limited flash memory capacity may restrict the complexity of programs.
  • 8-bit CPU core may not be suitable for computationally intensive tasks.
  • Lack of advanced features found in higher-end microcontrollers.

Working Principles

The ST7FLITEU09M6TR operates based on the principles of a typical microcontroller. It executes instructions stored in its flash memory, interacts with peripherals, and communicates with external devices as per the program logic. The CPU core processes data and controls the overall operation of the microcontroller.

Detailed Application Field Plans

The ST7FLITEU09M6TR can be utilized in various application fields, including but not limited to:

  1. Consumer Electronics:

    • Remote controls
    • Home automation systems
    • Wearable devices

  2. Industrial Automation:

    • Programmable logic controllers (PLCs)
    • Motor control systems
    • Sensor interfaces

  3. Automotive Systems:

    • Engine control units (ECUs)
    • Body control modules
    • Infotainment systems

Detailed and Complete Alternative Models

  • ST7FLITEU09B6TR
  • ST7FLITEU09C6TR
  • ST7FLITEU09D6TR
  • ST7FLITEU09E6TR

These alternative models offer similar functionality and characteristics, with slight variations in specifications and pin configurations.

In conclusion, the ST7FLITEU09M6TR is a versatile microcontroller suitable for a wide range of embedded applications. Its low power consumption, compact package, and integrated peripherals make it an attractive choice for cost-effective designs. However, its limited flash memory capacity and 8-bit CPU may pose limitations in certain scenarios. Nonetheless, the ST7FLITE

技術ソリューションにおける ST7FLITEU09M6TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ST7FLITEU09M6TR in technical solutions:

  1. Q: What is the ST7FLITEU09M6TR microcontroller used for? A: The ST7FLITEU09M6TR is a microcontroller commonly used in various technical solutions, such as industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the ST7FLITEU09M6TR? A: The ST7FLITEU09M6TR supports a maximum clock frequency of 8 MHz.

  3. Q: How much flash memory does the ST7FLITEU09M6TR have? A: The ST7FLITEU09M6TR has 8 KB of flash memory for program storage.

  4. Q: Can I use the ST7FLITEU09M6TR for analog signal processing? A: Yes, the ST7FLITEU09M6TR has built-in analog peripherals, such as ADC (Analog-to-Digital Converter) and DAC (Digital-to-Analog Converter), which can be used for analog signal processing.

  5. Q: Does the ST7FLITEU09M6TR support communication protocols like UART, SPI, and I2C? A: Yes, the ST7FLITEU09M6TR supports UART (Universal Asynchronous Receiver-Transmitter), SPI (Serial Peripheral Interface), and I2C (Inter-Integrated Circuit) communication protocols.

  6. Q: What is the operating voltage range of the ST7FLITEU09M6TR? A: The ST7FLITEU09M6TR operates within a voltage range of 2.7V to 5.5V.

  7. Q: Can I use the ST7FLITEU09M6TR in battery-powered applications? A: Yes, the low power consumption of the ST7FLITEU09M6TR makes it suitable for battery-powered applications.

  8. Q: Does the ST7FLITEU09M6TR have any built-in security features? A: Yes, the ST7FLITEU09M6TR provides hardware security features like read-out protection and write protection to secure the program memory.

  9. Q: What development tools are available for programming the ST7FLITEU09M6TR? A: STMicroelectronics provides a range of development tools, including an integrated development environment (IDE) called STVD, which supports programming and debugging of the ST7FLITEU09M6TR.

  10. Q: Are there any application notes or reference designs available for the ST7FLITEU09M6TR? A: Yes, STMicroelectronics provides application notes, reference designs, and technical documentation on their website, which can help in the application of the ST7FLITEU09M6TR in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the official documentation and datasheet for accurate information.