STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STL160N3LLH6
詳細を表示 DataSheets

STL160N3LLH6

Product Overview

Category

The STL160N3LLH6 belongs to the category of power MOSFETs.

Use

It is used as a high-voltage N-channel enhancement-mode power MOSFET.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

The STL160N3LLH6 comes in a TO-220 package.

Essence

The essence of this product lies in its ability to efficiently control high voltages in various electronic applications.

Packaging/Quantity

The STL160N3LLH6 is typically packaged in reels and is available in quantities suitable for industrial production.

Specifications

  • Drain-Source Voltage (VDS): 650V
  • Continuous Drain Current (ID): 100A
  • On-Resistance (RDS(on)): 0.16Ω
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 110nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The pin configuration of the STL160N3LLH6 includes three pins: gate, drain, and source. The gate pin is used to control the flow of current between the drain and source pins.

Functional Features

  • High voltage capability allows for use in high-power applications
  • Low input capacitance enables fast switching speeds
  • Low on-resistance minimizes power loss and heat generation

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Fast switching speed
  • Low on-resistance

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • Requires careful handling due to high voltage capabilities

Working Principles

The STL160N3LLH6 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. By modulating the gate voltage, the MOSFET can effectively regulate high voltages in various circuits.

Detailed Application Field Plans

The STL160N3LLH6 is commonly used in: - Switching power supplies - Motor control systems - Inverters - Industrial automation equipment

Detailed and Complete Alternative Models

Some alternative models to the STL160N3LLH6 include: - IRFP4668PBF - FDPF33N25T - IXFN38N100Q2

In conclusion, the STL160N3LLH6 power MOSFET offers high voltage capability, fast switching speed, and low on-resistance, making it suitable for a wide range of high-power electronic applications.

Word count: 410

技術ソリューションにおける STL160N3LLH6 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum drain-source voltage of STL160N3LLH6?

    • The maximum drain-source voltage of STL160N3LLH6 is 30V.

  2. What is the continuous drain current of STL160N3LLH6?

    • The continuous drain current of STL160N3LLH6 is 160A.

  3. What is the on-resistance of STL160N3LLH6?

    • The on-resistance of STL160N3LLH6 is typically 1.8mΩ.

  4. What is the gate threshold voltage of STL160N3LLH6?

    • The gate threshold voltage of STL160N3LLH6 is typically 2V.

  5. What are the typical applications for STL160N3LLH6?

    • STL160N3LLH6 is commonly used in high-current, high-frequency switching applications such as power supplies, motor control, and automotive systems.

  6. What is the operating temperature range of STL160N3LLH6?

    • The operating temperature range of STL160N3LLH6 is -55°C to 175°C.

  7. Does STL160N3LLH6 require a heat sink for operation?

    • Depending on the application and power dissipation, a heat sink may be required for optimal performance of STL160N3LLH6.

  8. Is STL160N3LLH6 suitable for use in automotive applications?

    • Yes, STL160N3LLH6 is designed for use in automotive systems and meets relevant industry standards.

  9. What package type is STL160N3LLH6 available in?

    • STL160N3LLH6 is available in a TO-247 package.

  10. Are there any recommended companion components when using STL160N3LLH6?

    • It is recommended to use appropriate gate drivers and protection circuitry when integrating STL160N3LLH6 into a technical solution to ensure reliable and efficient operation.