STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STL5N80K5

STL5N80K5

Product Overview

Category

The STL5N80K5 belongs to the category of power MOSFETs.

Use

It is commonly used in power supply applications, motor control, and other high-voltage switching applications.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

The STL5N80K5 is typically available in a TO-220 package.

Essence

The essence of the STL5N80K5 lies in its ability to efficiently switch high voltages with low power dissipation.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Drain-Source Voltage (VDS): 800V
  • Continuous Drain Current (ID): 4.5A
  • On-Resistance (RDS(on)): 1.25Ω
  • Gate-Source Voltage (VGS): ±30V
  • Total Gate Charge (Qg): 15nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The STL5N80K5 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various high-power applications.
  • Low input capacitance enables fast switching speeds.
  • Low on-resistance minimizes power loss and heat generation.

Advantages

  • Suitable for high-voltage applications
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • May require additional drive circuitry due to higher gate-source voltage

Working Principles

The STL5N80K5 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The STL5N80K5 is well-suited for use in: - Switched-mode power supplies - Motor control circuits - High-voltage inverters

Detailed and Complete Alternative Models

Some alternative models to the STL5N80K5 include: - STP5NK80ZFP - IRF840 - FQP27P06

In conclusion, the STL5N80K5 power MOSFET offers high voltage capability, fast switching speed, and low on-resistance, making it suitable for a wide range of high-power applications.

[Word count: 340]

技術ソリューションにおける STL5N80K5 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum drain-source voltage rating of STL5N80K5?

    • The maximum drain-source voltage rating of STL5N80K5 is 800V.

  2. What is the continuous drain current rating of STL5N80K5?

    • The continuous drain current rating of STL5N80K5 is 5A.

  3. What is the on-state resistance (RDS(on)) of STL5N80K5?

    • The on-state resistance (RDS(on)) of STL5N80K5 is typically 1.4 ohms.

  4. What is the gate threshold voltage of STL5N80K5?

    • The gate threshold voltage of STL5N80K5 is typically 2-4V.

  5. What are the typical applications of STL5N80K5 in technical solutions?

    • STL5N80K5 can be used in applications such as switching power supplies, motor control, and lighting ballasts.

  6. What is the maximum junction temperature of STL5N80K5?

    • The maximum junction temperature of STL5N80K5 is 150°C.

  7. Does STL5N80K5 require a heat sink for operation?

    • Depending on the application and operating conditions, a heat sink may be required for efficient operation of STL5N80K5.

  8. Is STL5N80K5 suitable for high-frequency switching applications?

    • Yes, STL5N80K5 is suitable for high-frequency switching applications due to its fast switching characteristics.

  9. What are the recommended storage conditions for STL5N80K5?

    • STL5N80K5 should be stored in a dry environment at temperatures between -55°C and 150°C.

  10. What are the key advantages of using STL5N80K5 in technical solutions?

    • The key advantages of using STL5N80K5 include low on-state resistance, high voltage capability, and suitability for various power control applications.