STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STM32F303VEY6TR
詳細を表示 DataSheets

STM32F303VEY6TR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices, robotics, industrial automation
  • Characteristics: High-performance, low-power consumption, rich peripheral set, advanced connectivity options
  • Package: LQFP64
  • Essence: ARM Cortex-M4 32-bit RISC core with floating-point unit (FPU)
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Core: ARM Cortex-M4
  • Clock Speed: Up to 72 MHz
  • Flash Memory: 512 KB
  • RAM: 40 KB
  • Operating Voltage: 2.0V - 3.6V
  • Digital I/O Pins: 51
  • Analog Input Pins: 16
  • Communication Interfaces: UART, SPI, I2C, USB, CAN, Ethernet
  • Timers: 16-bit and 32-bit timers
  • ADC Resolution: 12-bit
  • DMA Channels: 12
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The STM32F303VEY6TR microcontroller has a total of 64 pins. Here is the detailed pin configuration:

  • GPIO Pins: PA0-PA15, PB0-PB15, PC0-PC15, PD0-PD2, PE0-PE15, PF0-PF15
  • Analog Input Pins: PA0-PA7, PB0-PB1, PC0-PC5, PC10-PC11
  • Communication Interface Pins: USART1 (PA9-TX, PA10-RX), USART2 (PA2-TX, PA3-RX), SPI1 (PA5-SCK, PA6-MISO, PA7-MOSI), I2C1 (PB6-SCL, PB7-SDA), CAN1 (PA11-RX, PA12-TX)
  • Power Supply Pins: VDD, VSS, VBAT

Functional Features

  • High-performance ARM Cortex-M4 core with FPU for efficient mathematical operations
  • Rich peripheral set including UART, SPI, I2C, USB, CAN, and Ethernet interfaces
  • Advanced connectivity options for seamless integration into various systems
  • Low-power consumption for energy-efficient designs
  • Extensive memory options with 512 KB flash and 40 KB RAM
  • Flexible GPIO pins for versatile digital and analog input/output configurations
  • DMA channels for efficient data transfer between peripherals and memory
  • Timers for precise timing and event generation
  • 12-bit ADC for accurate analog signal acquisition

Advantages and Disadvantages

Advantages: - Powerful ARM Cortex-M4 core enables high-performance computing - Rich peripheral set allows for versatile applications - Advanced connectivity options facilitate seamless integration - Low-power consumption extends battery life in portable devices - Ample memory resources for complex applications - Flexible GPIO pins provide versatility in design

Disadvantages: - Limited number of pins may restrict the number of peripherals that can be connected simultaneously - Higher cost compared to simpler microcontrollers with fewer features

Working Principles

The STM32F303VEY6TR microcontroller operates based on the ARM Cortex-M4 architecture. It executes instructions stored in its flash memory and interacts with various peripherals through its rich peripheral set. The core's advanced features, such as the FPU, enable efficient mathematical operations. The microcontroller communicates with external devices using its communication interfaces, processes analog signals through its ADC, and controls timing and events using its timers.

Detailed Application Field Plans

The STM32F303VEY6TR microcontroller finds applications in various fields, including:

  1. Embedded Systems: Used in consumer electronics, home automation, and wearable devices.
  2. Internet of Things (IoT): Enables connectivity and control in IoT devices such as smart home systems and industrial sensors.
  3. Robotics: Provides the computational power and interface capabilities required for robot control and sensing.
  4. Industrial Automation: Used in industrial control systems, motor control, and factory automation.
  5. Automotive: Supports automotive applications such as engine management, dashboard displays, and advanced driver assistance systems.

Detailed and Complete Alternative Models

  1. STM32F303VCT6: Similar to STM32F303VEY6TR but available in a different package (LQFP100).
  2. STM32F303RET6: Similar to STM32F303VEY6TR but available in a different package (LQFP64).
  3. STM32F303K8T6: Lower-cost alternative with reduced flash memory (64 KB) and fewer pins (32).

These alternative models offer similar functionality and are suitable replacements depending on specific design requirements.

Word count: 550 words

技術ソリューションにおける STM32F303VEY6TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STM32F303VEY6TR in technical solutions:

  1. Q: What is the STM32F303VEY6TR microcontroller used for? A: The STM32F303VEY6TR is a microcontroller from STMicroelectronics that is commonly used in various technical solutions, including industrial automation, consumer electronics, and Internet of Things (IoT) applications.

  2. Q: What is the maximum clock frequency of the STM32F303VEY6TR? A: The STM32F303VEY6TR can operate at a maximum clock frequency of 72 MHz.

  3. Q: How much flash memory does the STM32F303VEY6TR have? A: The STM32F303VEY6TR has 512 KB of flash memory for storing program code and data.

  4. Q: Does the STM32F303VEY6TR support analog-to-digital conversion (ADC)? A: Yes, the STM32F303VEY6TR has a built-in 12-bit ADC with multiple channels for analog signal acquisition.

  5. Q: Can I use the STM32F303VEY6TR for motor control applications? A: Absolutely! The STM32F303VEY6TR includes advanced motor control peripherals, such as PWM timers and encoder interfaces, making it suitable for motor control applications.

  6. Q: Does the STM32F303VEY6TR support communication protocols like UART, SPI, and I2C? A: Yes, the STM32F303VEY6TR has multiple USART, SPI, and I2C interfaces, allowing seamless integration with other devices and communication protocols.

  7. Q: Is the STM32F303VEY6TR compatible with Arduino? A: Yes, the STM32F303VEY6TR is supported by the Arduino IDE, enabling easy development and programming using the Arduino ecosystem.

  8. Q: Can I use the STM32F303VEY6TR for real-time applications? A: Absolutely! The STM32F303VEY6TR features a Cortex-M4 core with hardware support for real-time operating systems (RTOS) and low-latency interrupt handling.

  9. Q: What kind of power supply does the STM32F303VEY6TR require? A: The STM32F303VEY6TR operates at a supply voltage range of 2.0V to 3.6V, making it compatible with various power sources, including batteries and regulated power supplies.

  10. Q: Are there any development boards available for the STM32F303VEY6TR? A: Yes, STMicroelectronics offers development boards like the Nucleo-F303RE, which provide an easy-to-use platform for prototyping and evaluating the STM32F303VEY6TR microcontroller.

Please note that these answers are general and may vary depending on specific application requirements and configurations.