STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STM8L151F3P6TR
詳細を表示 DataSheets

STM8L151F3P6TR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Low power consumption, high performance, small form factor
  • Package: TSSOP-20
  • Essence: 8-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: STM8
  • Core: 8-bit
  • Flash Memory: 8 KB
  • RAM: 1 KB
  • Operating Voltage: 1.8V to 3.6V
  • Clock Speed: Up to 16 MHz
  • Timers: 2 x 16-bit, 1 x 8-bit
  • Communication Interfaces: SPI, I2C, UART
  • ADC: 10-bit, 5 channels
  • GPIO: 15 pins
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The STM8L151F3P6TR microcontroller has a total of 20 pins. The pin configuration is as follows:

  1. VDD: Power supply voltage
  2. GND: Ground
  3. NRST: Reset pin
  4. PA1: General-purpose I/O pin
  5. PA2: General-purpose I/O pin
  6. PA3: General-purpose I/O pin
  7. PA4: General-purpose I/O pin
  8. PA5: General-purpose I/O pin
  9. PA6: General-purpose I/O pin
  10. PA7: General-purpose I/O pin
  11. PB0: General-purpose I/O pin
  12. PB1: General-purpose I/O pin
  13. PB2: General-purpose I/O pin
  14. PB3: General-purpose I/O pin
  15. PB4: General-purpose I/O pin
  16. PB5: General-purpose I/O pin
  17. PB6: General-purpose I/O pin
  18. PB7: General-purpose I/O pin
  19. VSS: Ground
  20. OSCIN/OSCOUT: Oscillator input/output

Functional Features

  • Low power consumption for battery-powered applications
  • High-performance 8-bit core for efficient processing
  • Integrated peripherals for enhanced functionality
  • Wide operating voltage range for flexibility in different systems
  • Small form factor package for space-constrained designs

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life - High-performance core enables fast and efficient processing - Integrated peripherals reduce external component count - Wide operating voltage range allows for versatile applications - Small form factor package saves board space

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers - 8-bit architecture may not be suitable for complex applications requiring more processing power

Working Principles

The STM8L151F3P6TR microcontroller operates based on the STM8 architecture, which is an 8-bit core designed for low-power applications. It utilizes a combination of hardware and software to execute instructions and interact with external devices. The integrated peripherals, such as timers, communication interfaces, and ADC, provide additional functionality to the microcontroller.

Detailed Application Field Plans

The STM8L151F3P6TR microcontroller finds applications in various fields, including:

  1. Embedded Systems: Used in industrial automation, smart home devices, and automotive electronics.
  2. IoT Devices: Enables connectivity and control in IoT applications like smart sensors and wearable devices.
  3. Consumer Electronics: Power-efficient microcontroller for portable devices, remote controls, and small appliances.

Detailed and Complete Alternative Models

  1. STM8L051F3P6TR: Similar specifications but with lower flash memory and RAM.
  2. STM8L152C6T6TR: Higher flash memory and RAM, additional peripherals, but larger package size.
  3. STM8S003F3P6TR: 8-bit microcontroller with similar pin configuration and features.

These alternative models offer different trade-offs in terms of memory, peripherals, and package size, allowing designers to choose the most suitable option for their specific requirements.

Word count: 436 words

技術ソリューションにおける STM8L151F3P6TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STM8L151F3P6TR in technical solutions:

  1. Q: What is the STM8L151F3P6TR microcontroller used for? A: The STM8L151F3P6TR is a low-power microcontroller commonly used in various technical solutions, including IoT devices, industrial automation, and consumer electronics.

  2. Q: What is the maximum clock frequency of the STM8L151F3P6TR? A: The STM8L151F3P6TR can operate at a maximum clock frequency of 16 MHz.

  3. Q: How much flash memory does the STM8L151F3P6TR have? A: The STM8L151F3P6TR has 8 KB of flash memory for program storage.

  4. Q: Can I use the STM8L151F3P6TR for battery-powered applications? A: Yes, the STM8L151F3P6TR is designed for low-power applications and can be used in battery-powered devices.

  5. Q: Does the STM8L151F3P6TR support analog-to-digital conversion (ADC)? A: Yes, the STM8L151F3P6TR has an integrated 12-bit ADC with multiple channels for analog sensor interfacing.

  6. Q: What communication interfaces are supported by the STM8L151F3P6TR? A: The STM8L151F3P6TR supports UART, SPI, and I2C communication interfaces for data exchange with other devices.

  7. Q: Can I use the STM8L151F3P6TR for real-time applications? A: Yes, the STM8L151F3P6TR has a built-in real-time clock (RTC) and supports interrupt handling, making it suitable for real-time applications.

  8. Q: What is the operating voltage range of the STM8L151F3P6TR? A: The STM8L151F3P6TR operates within a voltage range of 1.65V to 3.6V.

  9. Q: Does the STM8L151F3P6TR have any built-in security features? A: Yes, the STM8L151F3P6TR provides hardware encryption and decryption capabilities, as well as readout protection for flash memory.

  10. Q: Is there a development environment available for programming the STM8L151F3P6TR? A: Yes, STMicroelectronics provides an integrated development environment (IDE) called "ST Visual Develop" that supports programming the STM8L151F3P6TR.

Please note that these answers are general and may vary depending on specific application requirements and the version of the microcontroller being used.