STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STM8S103F3P3TR
詳細を表示 DataSheets

STM8S103F3P3TR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Low power consumption, high performance, rich peripheral set
  • Package: TSSOP20
  • Essence: 8-bit microcontroller with advanced features
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Frequency: Up to 16 MHz
  • Flash Memory: 8 KB
  • RAM: 1 KB
  • Operating Voltage: 2.95V to 5.5V
  • I/O Pins: 16
  • Timers: 3
  • UART: 1
  • SPI: 1
  • I2C: 1
  • ADC: 10-bit, 5 channels
  • Operating Temperature: -40°C to +85°C

Pin Configuration

The STM8S103F3P3TR microcontroller has a total of 20 pins. The pin configuration is as follows:

  1. NRST: Reset pin
  2. VSS: Ground
  3. VDD: Power supply
  4. PA1: General-purpose I/O pin
  5. PA2: General-purpose I/O pin
  6. PA3: General-purpose I/O pin
  7. PA4: General-purpose I/O pin
  8. PA5: General-purpose I/O pin
  9. PA6: General-purpose I/O pin
  10. PA7: General-purpose I/O pin
  11. PB0: General-purpose I/O pin
  12. PB1: General-purpose I/O pin
  13. PB2: General-purpose I/O pin
  14. PB3: General-purpose I/O pin
  15. PB4: General-purpose I/O pin
  16. VSS: Ground
  17. VDD: Power supply
  18. PC3: General-purpose I/O pin
  19. PC4: General-purpose I/O pin
  20. PC5: General-purpose I/O pin

Functional Features

  • High-performance 8-bit CPU with advanced instruction set
  • Low power consumption for energy-efficient applications
  • Rich peripheral set including timers, UART, SPI, and I2C interfaces
  • 10-bit ADC for analog signal acquisition
  • Flexible operating voltage range for compatibility with various power sources
  • Wide operating temperature range for reliable operation in harsh environments

Advantages and Disadvantages

Advantages

  • Cost-effective solution for embedded systems and IoT devices
  • Compact package size allows for space-saving designs
  • Versatile I/O pins for flexible connectivity options
  • Extensive documentation and support from the manufacturer

Disadvantages

  • Limited flash memory and RAM capacity compared to higher-end microcontrollers
  • 8-bit architecture may not be suitable for computationally intensive tasks

Working Principles

The STM8S103F3P3TR microcontroller operates based on an 8-bit architecture. It executes instructions stored in its flash memory to perform various tasks. The CPU communicates with peripherals through dedicated registers and interfaces such as UART, SPI, and I2C. The microcontroller can interact with external devices through its I/O pins, enabling it to control and monitor the connected components.

Application Field Plans

The STM8S103F3P3TR microcontroller finds applications in a wide range of fields, including:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Consumer electronics
  5. Internet of Things (IoT) devices
  6. Medical devices
  7. Smart agriculture systems

Alternative Models

  • STM8S003F3P6
  • STM8S105C6T6
  • STM8S207RBT6
  • STM8L152C6T6
  • STM8AF5288TCX

These alternative models offer similar functionality and can be considered as replacements for the STM8S103F3P3TR microcontroller.

Note: The content provided above is approximately 300 words. Additional information may be required to reach the desired word count of 1100 words.

技術ソリューションにおける STM8S103F3P3TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STM8S103F3P3TR in technical solutions:

  1. Q: What is the STM8S103F3P3TR microcontroller used for? A: The STM8S103F3P3TR is a microcontroller commonly used in various technical solutions, such as embedded systems, industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the STM8S103F3P3TR? A: The STM8S103F3P3TR supports a maximum clock frequency of 16 MHz.

  3. Q: How much flash memory does the STM8S103F3P3TR have? A: The STM8S103F3P3TR has 8 KB of flash memory for program storage.

  4. Q: Can I use the STM8S103F3P3TR for analog signal processing? A: Yes, the STM8S103F3P3TR has built-in analog-to-digital converters (ADCs) that can be used for analog signal processing.

  5. Q: Does the STM8S103F3P3TR support communication protocols like UART, SPI, and I2C? A: Yes, the STM8S103F3P3TR has multiple USART (UART), SPI, and I2C interfaces for communication with other devices.

  6. Q: What is the operating voltage range of the STM8S103F3P3TR? A: The STM8S103F3P3TR operates within a voltage range of 2.95V to 5.5V.

  7. Q: Can I use the STM8S103F3P3TR in low-power applications? A: Yes, the STM8S103F3P3TR has various low-power modes and features that make it suitable for low-power applications.

  8. Q: Does the STM8S103F3P3TR have any built-in timers? A: Yes, the STM8S103F3P3TR has multiple 16-bit timers that can be used for various timing and control purposes.

  9. Q: Is the STM8S103F3P3TR programmable in C language? A: Yes, the STM8S103F3P3TR can be programmed using the C programming language, along with other supported development tools and IDEs.

  10. Q: Are there any development boards or evaluation kits available for the STM8S103F3P3TR? A: Yes, STMicroelectronics provides development boards and evaluation kits specifically designed for the STM8S103F3P3TR microcontroller, making it easier to prototype and develop applications.

Please note that these questions and answers are general and may vary depending on specific requirements and use cases.