STMicroelectronics
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
STM8S207RBT6TR
詳細を表示 DataSheets

STM8S207RBT6TR

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Low power consumption, high performance, rich peripheral set
  • Package: LQFP64
  • Essence: 8-bit microcontroller with advanced features
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Architecture: STM8 core
  • CPU Frequency: Up to 24 MHz
  • Flash Memory: 128 KB
  • RAM: 6 KB
  • Operating Voltage: 2.95V to 5.5V
  • I/O Pins: 55
  • Timers: 3 x 16-bit, 1 x 8-bit
  • Communication Interfaces: SPI, I2C, UART
  • Analog-to-Digital Converter (ADC): 10-bit, 10 channels
  • PWM Channels: 4
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The STM8S207RBT6TR microcontroller has a total of 64 pins. The pin configuration is as follows:

STM8S207RBT6TR Pin Configuration

Functional Features

  • High-performance 8-bit microcontroller suitable for various applications
  • Low power consumption for energy-efficient designs
  • Rich peripheral set including timers, communication interfaces, and ADC
  • Flexible clock control options for optimized power management
  • Enhanced debugging and development capabilities
  • Wide operating voltage range for compatibility with different power sources

Advantages and Disadvantages

Advantages

  • High performance compared to other 8-bit microcontrollers
  • Low power consumption extends battery life in portable devices
  • Rich peripheral set reduces the need for external components
  • Flexible clock control options for power optimization
  • Enhanced debugging and development capabilities simplify software development

Disadvantages

  • Limited processing power compared to 16-bit or 32-bit microcontrollers
  • Smaller memory capacity compared to higher-end microcontrollers
  • Limited number of I/O pins may restrict connectivity options in complex designs

Working Principles

The STM8S207RBT6TR microcontroller is based on the STM8 core architecture. It operates at a maximum frequency of 24 MHz and features a rich set of peripherals, including timers, communication interfaces, and an ADC. The microcontroller executes instructions stored in its flash memory and interacts with external devices through its I/O pins.

Detailed Application Field Plans

The STM8S207RBT6TR microcontroller is suitable for various application fields, including:

  1. Industrial automation: Control systems, motor drives, and monitoring devices.
  2. Home automation: Smart lighting, HVAC control, and security systems.
  3. Automotive electronics: Dashboard displays, engine control units, and infotainment systems.
  4. Consumer electronics: Remote controls, wearable devices, and home appliances.
  5. Internet of Things (IoT): Sensor nodes, smart meters, and connected devices.

Detailed and Complete Alternative Models

  • STM8S105C6T6: Similar features but with lower flash memory and fewer I/O pins.
  • STM8S207K6T6: Higher flash memory capacity and more I/O pins.
  • STM8L151G6U6: Ultra-low-power microcontroller with similar features.

These alternative models provide different options based on specific project requirements.

Word count: 350 words

技術ソリューションにおける STM8S207RBT6TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of STM8S207RBT6TR in technical solutions:

  1. Q: What is the STM8S207RBT6TR microcontroller used for? A: The STM8S207RBT6TR is a microcontroller commonly used in various technical solutions, such as industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the STM8S207RBT6TR? A: The STM8S207RBT6TR supports a maximum clock frequency of 16 MHz.

  3. Q: How much flash memory does the STM8S207RBT6TR have? A: The STM8S207RBT6TR has 128 KB of flash memory.

  4. Q: Can I use the STM8S207RBT6TR for real-time applications? A: Yes, the STM8S207RBT6TR is suitable for real-time applications due to its fast interrupt response time and efficient processing capabilities.

  5. Q: Does the STM8S207RBT6TR support analog-to-digital conversion (ADC)? A: Yes, the STM8S207RBT6TR has an integrated 10-bit ADC with multiple channels for analog signal conversion.

  6. Q: What communication interfaces are available on the STM8S207RBT6TR? A: The STM8S207RBT6TR supports various communication interfaces, including UART, SPI, and I2C.

  7. Q: Can I program the STM8S207RBT6TR using C language? A: Yes, the STM8S207RBT6TR can be programmed using the C programming language, along with other supported development tools and IDEs.

  8. Q: What is the operating voltage range of the STM8S207RBT6TR? A: The STM8S207RBT6TR operates within a voltage range of 2.95V to 5.5V.

  9. Q: Does the STM8S207RBT6TR have built-in hardware timers? A: Yes, the STM8S207RBT6TR has multiple built-in hardware timers that can be used for various timing and synchronization purposes.

  10. Q: Is the STM8S207RBT6TR suitable for low-power applications? A: Yes, the STM8S207RBT6TR has power-saving features, such as multiple low-power modes and a low-power consumption design, making it suitable for low-power applications.

Please note that these answers are general and may vary depending on specific application requirements and configurations.